Pick Data From Every 2 Columns And Arrange It Vertically?
Apr 19, 2013
i want to pick data from every 2 columns and arrange it vertically, one under the other ;
sample data:
A 579751 579800 52151 52175 126721 126750
B 546451 546500
C 608971 609000 508081 508110 548941 548970
E 962701 962750 24851 24875
desired outcome:
A 579751 579800
52151 52175
126721 126750
B 546451 546500
C 608971 609000
508081 508110
548941 548970
E 962701 962750
24851 24875
View 6 Replies
ADVERTISEMENT
Sep 25, 2012
I want to take a list of phone numbers in a single column(800,000+ rows)and spread the numbers across the page horizontally to fill the page. Each of the new rows will have probably 4-5 phone numbers. below is an illustration:
original:
column A
row1 5551234
row2 5553432
[Code].....
View 3 Replies
View Related
Jul 22, 2009
Had a quick browse through the forums for an answer but as it is quite hard to describe i cant quite find the answer.
Basically I need to split some cells but they have stacked text in them i.e
Cell a1 shows:
666666
part 77777 x 20
5x s452563
Cell b1 shows:
1x 254684564
3x 4481211111 & 5 ea g8373
etc.
When i run the text to columns function i only get the first line of the data, i could ideally like to split the data by spaces and/ or line breaks.
View 7 Replies
View Related
Apr 25, 2013
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
View 2 Replies
View Related
Aug 20, 2014
I want to bring some scattered rows in data range directly underneath the appropriate columns
Here is the description of manual way of doing the same task.
1. first, I check for last empty rows in column "M" i.e for country(By pressing CTRL + Down arrow key in column "M") and then i look into the immediate next empty rows where is the date values, usually i found it into next rows but in a different columns. so i copy the range one cell before from date values till last columns in that same row and i bring it back to the original row where it should be indeed.
For example after pressing CTRL+down arrow key in columns "M", If i see date values In next immediate rows "E7". I copied from "C7" or "B7" (one cell before date value cell) ,depending on In which cell the date value is sitting till last columns i.e "N7" and paste it manually to "D6". and I do repeat the same work manually till i aligned all rows to their proper place.
I am attaching my file also.
View 2 Replies
View Related
Sep 9, 2013
How can I submit the data from userform in the spreadsheet vertically like A1,A2,.....
View 9 Replies
View Related
Jan 7, 2009
I have two to four columns with this content: w2s3esus who translated means 9 chars (the number before the letter is the time it appears). I want to compare the columns and pick the shortest one automatically like so:
column 1: w3s4nusun = 12
column 2: w5s2esus = 11
column result: w5s2esus
View 4 Replies
View Related
Jan 6, 2009
I have a list of data which is not in any particular order....
View 9 Replies
View Related
Jun 4, 2014
In the attached spreadsheet, I have the original data display horizontally (sheet2). Col A is Patient #. The header in row 1 are the test codes. Each patient took only 1 test and have result reported either neg, pos, pending or not eval. How do I transpose the header and have the test results consolidated in 1 column accordingly as display in sheet 3.
View 4 Replies
View Related
May 6, 2014
See the below columns: Column A and Column B. I would like to get all the data in column A to become column names and the data assorted under these column names vertically.
Column A Column B
0_country Canada
0_employee_type HE
0_province" AB
[Code] .........
I would like the end result to look like this
0_Country 0_employee type 0_province
Canada HE AB
USA HO CA
UK HL XY
View 1 Replies
View Related
Apr 3, 2014
I want to delete alternative row in a worksheet or sorted so that I only have the following arrangements..
I have Data in Rows which as followings
Row 1
Row 2
Row 3
Row 4
Row 5
.
.
so on till 1000 data
I don't want Row 1, 3, 5 .... so on
The result should should be arranged as follows:
Row2
Row4
Row6
.
.
.
so on
View 6 Replies
View Related
Sep 23, 2013
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
Sheet1 AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506
Result after code has run.
Sheet2 AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506
View 2 Replies
View Related
Jun 16, 2014
My data are in cells A2:E7 I have 3 options first one is always in column A and rest 2 options are distributed in 4 columns B-C-D-E
I need to arrange all them to left as shown In G2:I7
ABCDEFGHI1FranJoneMichalPedroJoseLeft1Left2Left321Z71Z737Z17Z14Z17Z1751Z71Z7617Z17Z7Z17Z17Sheet1
View 4 Replies
View Related
Jun 14, 2013
I have a formula in cell A1 that I need to drag downwards so that it fills cells A2 to A10. That formula is picking up the figures located in another sheet but the figures on that sheet are arranged horizontally (A1 to J1). Is there a formula to perform this action? I've tried playing around with the $ sign in my formulas but it does not work.
View 2 Replies
View Related
May 11, 2014
I am starting a data sheet that I will be pasting from the internet into my data sheet daily, the problem I have is that the content data is pasting with blank rows between data and also there is one piece of data that is situated on the row below which i need moving to the end of the main data row, the idea is to have single data rows with no blank rows.
I have attached an example sheet showing the layout it repeats with only the amount of data that changes.
I have colored the data as follows:
Grey= Blank Rows
Yellow= Data Move to end of main row
Green= Unwanted Data
View 5 Replies
View Related
Apr 25, 2014
I have attached a work book to this to show what i want to do.
On sheet 'lorry 1'.
I have data in columns g to m.
I need that data to transfer to the lorry sheet as per example on sheet 'what it should look like'
It needs to segregate days and leave a line clear in between drops as per example
lorry 1.xlsx
View 4 Replies
View Related
May 26, 2014
i got data something like this...
m4-1
m4-10
m4-100
m4-2
m4-3
m4-30
i try to arrange it in ascending order...
m4-1
m4-2
m4-3
m4-10
m4-30
m4-100
View 7 Replies
View Related
Apr 4, 2009
I have 2 columns of data:
Column A is SKU #
Column B is Bin Capacity
I would like to take each SKU and its corresponding bin cap and arrange them into a 16 column and 9 row table on another sheet.
For example A1, B1, A2, and B2 of the old sheet, should become A1, B1, C1, D1 of the new sheet. Also I need there to be a line gap between each table.
Anyone know how to do this?
This is what I got so far:
View 10 Replies
View Related
Mar 29, 2012
I want to know is there any way to arrange bars in the chart with respect to their magnitude (ascending or descending) without making changes in the source data?
View 5 Replies
View Related
Nov 5, 2009
I'm trying to write code which allows me to cut and paste arrange of data from one sheet to the next.
the critical field is MRPC column i, I need to select all data that when I apply a auto filter allows me to cut and paste from the line below the header. And repeater using the a value
>=200
Cut all cells, rows paste.
then repeat this
>=155 to 199
>=145
PlantMaterialMaterial DescriptionSLocBatchL/OBMRBulkMRPCBinTypeUnrestr.BUnOpen QtyQual.Insp.BlockedMtyp100029PCV00703AAASADDLE CLAMP COVER1000R1120018.0008.0000.0000.000#N/A#N/A
View 9 Replies
View Related
Jul 3, 2007
How do I rearrange the data columns in a pivot table? I have a table with year to date months, open PO's, & budget numbers, but I'd like to change the order in which they show up in the pivot table.
View 2 Replies
View Related
Feb 5, 2014
(File is attached here)
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
View 3 Replies
View Related
Jun 10, 2014
I have a long list of accounts (for the purposes of of bookkeeping - keeping a cash disbursement journal) and I use data validation that uses this list when I enter an account's name in the journal. Because the list is very long, I often times have to scroll up and down the list in the drop down menu that comes up at a cell I need to populate and when looking for the proper name of the account I needed to be there. I am looking to add a capability to my data validation list use when I would be able to enter several symbols, part of the name of the account I am looking for, and the list of accounts displayed for me to choose from would get shortened based on the symbols I enter. the symbols I enter do not necessarily have to be the first symbols of the account name I am looking for. (as sometimes, I do not remember how exactly the account is called - and so I just guess part of the name ... )
View 10 Replies
View Related
Jun 29, 2009
In the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
View 4 Replies
View Related
Nov 23, 2007
I have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
View 3 Replies
View Related
Oct 28, 2012
I was wondering if i could arrange some sets of data (on one sheet) in fixed format and create a new sheet for each set of data using VBA
I have some sets of data in sheet (similar to the sheet "Raw data" of the attached file)
first four rows contain costumer-1 details,
next few rows contain bill details of costumer-1,
again,
next four rows contain costumer-2 details,
next few rows contain bill details of costumer-2,
and
table goes on for around 10-20 costumers
Now, I want to arrange the given set of data of each costumer into a fixed format (as sheet "reminder pad" of the attached file) and create a new sheet for each costumer
Also I want to add reference no to each sheet (with automatic increment for each sheet)
View 4 Replies
View Related
Jan 16, 2014
I am facing a issue with arranging a data in excel as weekly reports by getting a random input in the form as mentioned in the attachment
Needed like below
Name 1-Jan 2-Jan 3-Jan 4- Jan...........
Ram 0 L 0
Ravi 0 0 0
rohan 0 0 0
sheel 0 0 0
Inputs are like below format
name 2-Jan 8-Jan
Ram L 0
Ravi 0 0
rohan 0 L
sheel 0 L
Attached File : formal needed.xlsx
View 2 Replies
View Related
Aug 27, 2012
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
View 9 Replies
View Related
May 18, 2009
If I have a date that is 12 February 2008 I need to pick up data next to 31 January 2008 as that is nearest, however if my date is >15th February 2008 I want to pick up the data in the column next to 29 February 2008......
View 2 Replies
View Related
Dec 7, 2013
In the attached on the quote tab in cells G5 & H5 i have two formulas both trying to pick up the data from the highlighted matrix in the frame tab.(i only need one)
From the dropdowns in cells F1, F3 & F5 in the quote tab I wish to get the data from the matrix in the frame tab cell range C3 - F20
View 5 Replies
View Related
