Cell C10 contains 2 possible values, "CLIENTS" or "INDIRECT"
These are also the names of 2 dynamic named ranges
I am trying to use a COUNTIF to validate a subsequent cell, checking if the contents appear in the original list.
=COUNTIF(INDIRECT(C10),D10)
Checks to see if the value entered into D10 is within the dynamic named range, the name of which is entered into cell C10
Gives me a #Ref error
Say I have (cell A1) 10 salespeople and they each sell a (A2) $100/month membership, so I have (A3) $1,000 monthly revenue.
(A4) is an assumption about how many months the average person will stay a member.
So if A4 = 6, (6 month membership assumption) how would I get Excel to output $1,000 (the result from A3) into cells B3 through B8
but then for instance if A4 = 3 (3 month membership assumption) it would only output the the $1,000 result from A3 into cells B3 through B5
So like A1 through A4 of...
10
$100
$1,000
6
would output $1,000 into B3 through B8
but
10
$100
$1,000
3
would output $1,000 only to B3 to B5
I would like to simply validate the value entered to a cell against cells of a number of columns. I’d like it to return a vlue to be able to report it in another cell as below. (had to cmma separate the columns, can't get them aligned in this editor)
A, B, C, D, Q, R
1, b, 1, 2, 1, existing
or
A, B, C, D, Q, R
1, b, 1, 2, 5, not existing
So the user enters a value in cell Q to check against the other columns and return a value to R. Additionally, the cells to be validated (A - D) may contain more than one character, i.e. cell A could = 1b2.
The code below automatically displays the validation when I select the cell. But I would like the cell validation only display when the cell is empty. If the cell has data in it, then do nothing, but if the cell is empty, then display the validation.
If Not (Nothing Is Application.Intersect(Target, Range("B9"))) Then
SendKeys "%{down}"
End If
I've been struggling with this for a little while today and quite can't seem to figure it out. I have a range --- A6:A28 --- where a user will enter a percentage. The total should add up to a 100%, which is in cell A30.
My understanding is that a need a worksheet_calculate function to tell users to revise their entries if the results in a cell A30 are either less than or more than 100%. This is the simple, non-working procedure I have now:
If I have a cell "C8" default value is "choose" and it is a drop list of other values. I want to validate if "C8" is populated with a value other than "choose" that the user populates the SOME of other cells in the row like D8 or F8? I would like to alert something that the cell needs to be populated.
View 1 Replies View RelatedHow can I validate a cell to get only text and undescore?
Not any other special characters, like space, @#$%^&*()+!~
I have a sheet which in a certain cell (H4) must contain either an "I", "J", "R" or "S" in upper case.
The user fills in the sheet, and then a macro runs that does lots of things. I have been asked to put a bit of code at the start of the macros to validate the contents of cell H4.
However it doesnt seem to work, particularly the isempty statement
Sub SiteVal()
'
' SiteVal Macro
'
If ("H4") = "S" Then
Else
If ("H4") = "I" Then
Else
If ("H4") = "R" Then
Else
If ("H4") = "J" Then
Else
If IsEmpty("H4") = True Then
MsgBox "Site code must be input"
Exit Sub
Else
End If
End If
End If
End If
End If
'
End Sub
I would like to use VBA to validate the data in an Excel worksheet against either a named range or an array of valid data.
The valid data comes from an accounting system. It is a list of customer numbers. I am using ODBC and SQL to get the data into an array and then into a named range. This is working fine.
I want to validate the customer number column in my source Excel worksheet against either the array or the named range.
There are a variable number of lines in the source data.
I have a VBA procedure which starts at cell A2 and then works down column A until it reaches a blank cell.
I would like to use a VBA formulae which does something like:
IF active cell offset (0,3).Value in (named range or array)
Then set cell colour for active cell offset (0,3) = Green
Else set cell colour for active cell offset (0,3) = Red
End If
Or something like that.
Can this be done using VBA? Or do I need to create a new column in my source data and use VBA to place a VLOOKUP based on a named range into this new column?
I have a column which is formatted to custom [hh]:mm but could also have the following text entry "NWD", which is either the hours a member of staff works or Non Working Day.
I tried using a data validation list with **:** and NWD, but it recognises the **:** as exactly that.
I have 2 lists and I want to validate a cell to only allow items in List1 or list2 or A numeric value.
List1
D1
D2
D3
..
D10
..
Dxx
List2
Hol
Off
Sick
These lists may changein length and number of items
the second part, is can you valudate based on other values in a column, basically I have a list of names of available operatives, and I want to make sure each name can only be entered once in a column! Would be even better if I could get a dropdown which showed the remaining choices!
Userform that people use. I need validating the users input into the form.
1. Need to validate that A1 only has 3 letters (Alpha)
2. Need to validate that A2 is not left blank
3. Need to validate A3 has only 10 digits
My state is that when the user hits the submit button in the user form the macro checks for these validations above and if everything is ok emails the sheet. However if the user havent inputed the data correctly a msg box will pop to let them know what is wrong. If thats the case i do not want the sheet emailed. below is the email code i'm using
HTML Code:Â
Sub SendMail()
' Copy the sheet(1)
ThisWorkbook.Sheets(1).Copy
' Send Email
.SendMail Recipients:=Array("email.address@email.com"), Subject:="Test" & Format(Date, "dd/mmm/yy")
.Close SaveChanges:=False
End With
End Sub
I have been trying to figure out how to use a named range (on another sheet) to validate the user entered data in a specific column. All my attempts at utilizing worksheet_change event have ended in errors. I've created a simple workbook that shows what I'm trying to do and have attached it to this message. The 'Sample (Data)' worksheet has the data table that would be completed by the user. On the 'Validation' worksheet I have named the range to be used to validate the data as 'rngVal'. So when something is entered under the 'Expense Type' heading, the code would verify that the value entered was contained in the 'myVal' validation list. If it was not present in the list, a msgbox would instruct you to try again. After stealing bits of knowledge and code from many of the posts on this site I cobbled together the following (which results in an error at the 'set rngFind' line):
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngFind As Range
'Set Target = Cells(ActiveCell.Row, ActiveCell.Column)
Set rngFind = Range("rngVal"). Find(Target.Value)
'If data in column C changes, do the following
If Target.Column = 3 Then
'If the value is found on the validation list, do nothing.
If rngFind Is Nothing Then
Else
MsgBox "You must enter one of the following in this cell:"
With Application
.EnableEvents = False
.Undo
.EnableEvents = True
End With
End If
Else
End If
End Sub
I have a single-column list. The column header is 'ID'... records within this column repeat sometimes (this is ok). I need a worksheet function that will allow me to mark the second, third, or fourth duplicate, but leave the first duplicate alone or unmarked. I have searched the Web and this forum, and came up empty. If this cannot be done with a worksheet function, then VBA is welcome. No ColorIndex.
View 2 Replies View RelatedIs there a built-in function in Excel to sum subsequent numbers, starting from 1?
If I give for example 5 as input value to the function, it should return 1+2+3+4+5 = 15.
If I give 3 -> it should return 1+2+3 = 6 and so on.
I am building simple worksheets that consist of weekly time sheets. In cell B7 is the week ending date for that week. When I copy the worksheet onto a new worksheet, I want B7 of the new worksheet to be the week ending date 7 days later.
excal VBA programming.I have attached the file name "help" for your easy explanation purpose.
1. Is it possible to hide sheet nos. 1,2,3,4 & unhide the sheet as wished by me by puting the value (1or 2 or 3 or 4) in B3 cell.
2.There are per day production rate in E18 to E22 cell. Now whenever I will give value in H18 or H19 or H20 or H21 or H22, it will check whether the value is same with the respective E 18 or E19 or E20 or E21 or E22 cell. If both the values are not equal then give a message box "WARNING!!! YOUR VALUE IS NOT SAME". Can it be possible by creating VBA programming.
I'm trying to find a way of filling in a "form" on sheet1 and for that information to populate into the next empty row on sheet2. This would then give me a table of information in sheet2 generated from multiple entries into sheet1.
View 5 Replies View RelatedI have many dates in rows. I want to get the subsequent month from the date in each row in "mmm-yy" format.
15/10/12 should give me "Nov-12" though it is "Oct-12".
To get "Oct-12", I use =Text(cell,"mmm-yy"). What should I add to this formula to get "Nov-12"
i have a data validation problem is there a way i can use =INDIRECT(DEC!'Ai11>DEC!'AJ11) is this correct? when the cell in dec AI11 is greater than AJ11 i need a validation stop to take place
View 9 Replies View RelatedI have a table similar to the table on the left, and I need to convert it to something like what is on the right. Ultimately I will concatenate the numbers in the table on the right too with commas between, so if for some reason it's easier to go straight to that, that's an option.
So in the example below, states will be listed multiple times with a unique number next to it each time. The state may be listed up to say ten times or as little as one. Each time it is listed, it will have a different number next to it. I need to reformat this into one where each state is only listed once, and each possible number is next to it in one row.
20z3fwk.jpg
I have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.
Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".
In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).
I have a spreadsheet that has "Branch" Information starting below the heading in Cell C6.
I want to associate the information in the subsequent cells to a corresponding Sector that will be populated in column B6 onwards.
Example:
If the cell Cx has IMTB in it, then cell Bx will be Ops.
There are 6 Main Sectors - (CS, CSM, DM, CBSA, OPS, SPP) that need to be populated into Column B based upon one of the multiple possible Branches that are in Column C. the branch will fall under any ONE of the Sectors.
Essentially, I need to run a loop through, while statement, or something that will generate a true or a false for the entire column and then populate the empty column.
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
View 3 Replies View RelatedWhat I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.
I have a program that uses the Document Open event to display a custom form. This program is being used on about 50 computers for the past 8 years with no problems. One user has a problem now. They can open the program once and the code fires. But when the user tries to open the same file a second time, the "Microsoft Excel has encountered a problem and needs to close" dialog box is displayed. The document that is recovered has no vba modules and no code in the Document open event. I've uninstalled and reinstalled Office Professional. Shut down all firewalls.
View 9 Replies View RelatedI have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I have an Excel workbook which contains data entry fields, which have different types of data validation rules - like Lists, Date, Whole Number.
I do not want end users to remove these data validations as well as the formatting of these cells by doing copy/paste. So, I have implemented techniques mentioned in the following post, and elsewhere - to override the paste functionality and implement PasteSpecial values automatically.
[url]
To keep it simple, I'm only supporting pasting a single cell at a time.
Now my problem is this:
Doing the PasteSpecial values programmatically doesn't prevent the user from pasting values in the cell that violate the data validation rules. So, I can paste a string into a cell having data validation as Whole Number, or a invalid string into a cell having data validation as List.
The following post just suggests disabling paste whenever data validation is present:
[url]
But I would like to allow the paste operation if the value being pasted is a valid value for the cell's data validation.
