I'm trying to find a way of filling in a "form" on sheet1 and for that information to populate into the next empty row on sheet2. This would then give me a table of information in sheet2 generated from multiple entries into sheet1.
View 5 RepliesI have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.
Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".
In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I have a summary sheet which shows a range of information to give a full overview of the main information from individual feature forms.
At present, the manager is manually linking the cells from this sheet from the individual feature sheets with the normal =A1 kind of formula.
Is there an easier way to do this?
The solution would need to insert a new row each time in the summary sheet and pull out about five key bits of information from the feature sheet.
i have rows of data in an accounting worksheet (payments in/out) which needs constant updating by adding new rows. within the row a formula exists in column D such as =SUM(E11:J11) and the next row is =SUM(E12:J12). if i select row 12, right click and select insert, a new blank row 12 appears but without formula in column D. is it possible to insert row with retained formula? i would prefer to add a row from a blank row below current row and have new row appear with above rows formula but this is not vital.
View 12 Replies View RelatedI have a spread sheet which has a range as shown below.
Batch NumberItem 1Item 2Item 3
P155635
P254
P378
P2568
P454
P389
P385
I need to get the output as shown below which is for Batch number P2 I need to include Item 1 (568) in one row and delete the other P2 row. similarly I need to do for P3. The end result will be as shown below.
Batch NumberItem 1Item 2Item 3
P155635
P256854
P3898578
P454
I have the following formula that picks up the cost of the item with a certain number and the description includes the word post, however I now have a scenario whereby under a certain number there are several items that include the word post and the formula is only picking up the first one and not the sum of them all.
Formula:
{=IF(ISERROR(INDEX(Sheet1!$E$3:$E$706,MATCH("*"&$C$1&"*"&A3,Sheet1!$C$3:$C$711&Sheet1!$F$3:$F$707,0))),0,(INDEX(Sheet1!$E$3:$E$706,MATCH("*"&$C$1&"*"&A3,Sheet1!$C$3:$C$711&Sheet1!$F$3:$F$707,0))))}
Data:
Description
ID
NAME
Qty
Unit $ exc
Number
[Code] .....
Result:
Job Nos
Product Description
Post
24741
IN Wave
124.3
Is there anyway to pick up all the information?
I'm looking for a formula that would take the newest figure from a column in sheet A and update cell in sheet B. Every week it's going to be a different cell in a column in sheet A (always one below last week's) but the same cell in sheet B.
Basically I would like one cell in sheet B to show me most recent information from column in sheet A...
For the last few weeks this has been the place to be ;-). I have a question. Is there anyway to update a hyperlink automatically if the name of the sheet changes?
I have about 70 sheets and the names change every 22 days so I have it now for the value in the cell to update every time the sheet name is change but the hyperlink still is looking for the old sheet name.
Clicking the Add to DB button will add new items but not existing one.
now, what I want to do is to first, populate the existing TIN and then do the necessary update.
my basis for update is txtTIN.value
Here are the codes anyway:
VB:
'This adds the data on the WorkSheet named DBPIT"
Private Sub cmdAdd_Click()
Dim iRow As Long
[Code].....
I have tabs ranging from RA to DW
Also a summary sheet. As of now i have manually copied data from each tab onto summary sheet
Is there a way to automate the summary sheet so that when i enter data in each tab it gets updated automatically in summary sheet as well
Flexibility needed is:
If row is added in any sheet from RA to DW then the same should be created in summary
IF a resource is added in any tab then the same should be added in Summary.
Similary for delete too
Overall i should be able to update summary automatically when i update the tabs.
I have two Excel sheets (test-excel-1.xlsx & test-excel-2.xls)The test-excel-2.xls will never be opened. When I update cells in test-excel-1.xlsx and save, I want them to automatically update to the test-excel-2.xls without having to open it. I have tried the "='[test-excel-1.xlsx]Sheet1'!$G$4" but that needs me to open test-excel-2.xlsI also want original values to be pasted in test-excel-2.xls rather than the code (this is later used in another program).
View 6 Replies View RelatedSo I am trying to make a macro that will update monthly forecast data to what the actual production/consumption data was. The production/consumption numbers come in separate workbooks (i.e. "Jan14", "Feb14") and need to be linked to the 'Book' main file. The path needs to the Jan14 needs to come into the 'Book' file, not just the values. I would like to be able to just have a button above each month that will just automatically load that month's data when it becomes available.
View 1 Replies View RelatedI have a range (J:M) that contains a conditional formatting with more than 3 conditions. It is based on a script I found on this site but the problem is that the colors don't change unless I edit the cell.
I need to edit all cells in this range at once.
How can I do that? Basically it could do a loop through all cells in the range and "F2+enter" but it seems to be a very "stupid" way to do it.
How can I update the cells in the range in a better way?
I have a workbook with a list of drawing numbers (with customer, date, author etc.). New drawing numbers and their associated row of information are entered onto the sheet...
..HOWEVER, multiple users can be at least viewing and potentially entering information simultaneously.
I have written code where multiple people can view the same read only file, but not edit it and it be updated.
It seems quite unlikely, but is there anyway of 'live' updating a workbook whilst multiple people are viewing it? Or at least notifying other users when the sheet has been updated?
if it is possible te refer to a cell in another worksheet.
I have 10 worksheets in sheet one I put in cel A4 a digit en sheet 2 I put the formula that refers to sheet 1 cel A4.
Now I want a formula that refers to sheet -1 so in sheet 3 the formula automatically refers to sheet 2 cel A4 and in sheet 4 the formula automatically refers to sheet 3 cel A4 without corrections to the formula.
Whilst my question is partially answered in other threads, I don't seem to be able to get enough info to piece together a complete solution for my required task.
I have a "master" workbook that contains worksheets that are simply lists to be referred to by other workbooks...
IE; one worksheet is a list of customer names, another is a list of products, etc, etc...
The idea is that I only have to update the data in one place, and all the workbooks that use this information can draw the current data from a single source...
What I require; is some VBA code to import the require worksheet from the closed "master" workbook, and hide the imported worksheet so it's not seen by the user... this action would have to replace the previous copy of the hidden worksheet...
Ideally this would happen automatically when the user workbook was opened...
I have a single-column list. The column header is 'ID'... records within this column repeat sometimes (this is ok). I need a worksheet function that will allow me to mark the second, third, or fourth duplicate, but leave the first duplicate alone or unmarked. I have searched the Web and this forum, and came up empty. If this cannot be done with a worksheet function, then VBA is welcome. No ColorIndex.
View 2 Replies View RelatedIs there a built-in function in Excel to sum subsequent numbers, starting from 1?
If I give for example 5 as input value to the function, it should return 1+2+3+4+5 = 15.
If I give 3 -> it should return 1+2+3 = 6 and so on.
I am building simple worksheets that consist of weekly time sheets. In cell B7 is the week ending date for that week. When I copy the worksheet onto a new worksheet, I want B7 of the new worksheet to be the week ending date 7 days later.
Check the attached sample file
a. actual data in columns is approx 150 items (that is why i need to hide/unhide columns)
b. there are about 120 persons whom above items are issued depending on expiry of life of item i.e. issue date plus number of months mentioned in row 3. for example if coat was issued to John on 5th Jan then it's life expires on 5th May and so on.
Now what i want
1. by clicking hide checkbox only that specific column should hide or if i click Hide All check box all column in range should hide.
2. as i enter issue date expiry of that item should automatically update on corresponding month sheet i.e for above example 5th May should automatically get entered in sheet May.
I have entered sample data manually in months sheet.
aJITCBP.xlsm
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
I have many dates in rows. I want to get the subsequent month from the date in each row in "mmm-yy" format.
15/10/12 should give me "Nov-12" though it is "Oct-12".
To get "Oct-12", I use =Text(cell,"mmm-yy"). What should I add to this formula to get "Nov-12"
Cell C10 contains 2 possible values, "CLIENTS" or "INDIRECT"
These are also the names of 2 dynamic named ranges
I am trying to use a COUNTIF to validate a subsequent cell, checking if the contents appear in the original list.
=COUNTIF(INDIRECT(C10),D10)
Checks to see if the value entered into D10 is within the dynamic named range, the name of which is entered into cell C10
Gives me a #Ref error
I have a table similar to the table on the left, and I need to convert it to something like what is on the right. Ultimately I will concatenate the numbers in the table on the right too with commas between, so if for some reason it's easier to go straight to that, that's an option.
So in the example below, states will be listed multiple times with a unique number next to it each time. The state may be listed up to say ten times or as little as one. Each time it is listed, it will have a different number next to it. I need to reformat this into one where each state is only listed once, and each possible number is next to it in one row.
20z3fwk.jpg
I have a spreadsheet that has "Branch" Information starting below the heading in Cell C6.
I want to associate the information in the subsequent cells to a corresponding Sector that will be populated in column B6 onwards.
Example:
If the cell Cx has IMTB in it, then cell Bx will be Ops.
There are 6 Main Sectors - (CS, CSM, DM, CBSA, OPS, SPP) that need to be populated into Column B based upon one of the multiple possible Branches that are in Column C. the branch will fall under any ONE of the Sectors.
Essentially, I need to run a loop through, while statement, or something that will generate a true or a false for the entire column and then populate the empty column.
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
View 3 Replies View RelatedI have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.