Calculate % Change Across 4 Columns When Only Some Columns Are Populated
Mar 24, 2014
This is a piece of a spreadsheet meant to track patient Range of Motion performance over a max of 4 weeks. How do I calculate % Improvement [write the formula for column J] to account for the fact that sometimes a patient is discharged after being seen 2 weeks OR 3 weeks or 4 weeks. I don't want to change the formula every time.
The SUMMARY % Improvement in J7 - will be changed to the average of each individual patient % Improvement from column J.
Looks like I need a dynamic range from what I can see from Googling. Do I need to use Offset ?
I've populated a temporary worksheet with several columns of data. In this example my Amount Column has several null cells. What I need to do is write a macro to find any nulls and populate the nulls with the data in the last populated cell above it.
Example: the four empty cells below Account (524150) also need to be populated with 524150. The cell immediately below 524200 also needs to be populated with 524200 and the 3 empty cells below 512800 also need to be populated with 512800. Week to week the number of rows will change and the nulls will also change.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
I have a spreadsheet where columns belonging to the same topic are grouped together. For every group I want to calculate the sum of numbers in a row. How can I get all the columns belonging to a group?
I have a pivot table showing actual and forecasted sales per month for diffrent regions/sales channels/segment.
I would like to calculate the average monthly sale, for forecasted and actual data, within the pivot instead of doing it outside in columns to the right of the pivot table.
I'm just trying to calculate the difference between dates in two columns and applying conditional formatting based on if it is a positive or negative number. But when there is a null value in either of the date columns I don't want anything returned.
So far I'm either getting a 0 or a FALSE.
Column A = Date 1 Column B = Date 2 Column C = Formula
I am trying to determine the average reduction amount of appraised property values. I have two columns in my spreadsheet. Column H has appraised value of property. Column I has the accepted value of the property. Sometimes the accepted value is the same as the appraised value, sometimes it is reduced, and sometimes it is rejected.
I want to be able to find the average reduction amount when the accepted value is less than the appraised value and is not rejected.
Column H always shows a numerical value (i.e. $250,000), but Column I may have a numerical value or show "rejected".
I have 134 parts and each part is available in 5 price groups - these are static items that need no calculation as they are completed on another worksheet. I have 400+ "items" each item is made up of various parts. I need to calculate the cost of each item. Hard to explain without example so I have attached an example.
I have a table with changing length of the rows and columns. I need to calculate the sums of the rows, the columns ad the diagonal. I managed to write a working code for the columns, but have no success with the rest. Here is what I have:
I have data in 3 different columns (A, C, and E) to name a few. I want to average each of these columns, but if any of them include zero values, I want to exclude that from my calculation.
Example:
Column A = 10 Column B = 0 Column C = 3
Right now, my "average" formula, is showing the average as 4.33. (average a5, b5, c5)
The real average I'm looking for is 6.5. What is the best way to setup my formula?
I am in need of a formula to calculate the even distribution of values between two set values over a set number of columns. For example take a look at the attached screenshot. I have the numbers 2.88 and 2.44 and I need to fill in the empty cells between the two with with an even distribution of numbers in between the two (in descending order) over the 8 columns Screen-shot-2014-02-16-at-3.33.08-PM.jpg
So I am running in to a large brick wall! I have a single pivot tablet with a column for items received and then a column for items shipped. I would like to create a calculated field in the pivot table that will subtract the items received from the items shipped columns. I have attempted to add the calculated field using the tool bar but it keeps giving me "0" for every item on the pivot table when there are obvious differences.
I have a speadsheet that has a table containing scores of audits, in the last 3 columns of the tabe I have the two totals (columns AC and AD)
In Column "AF" I wish to show where they will rank based on the results, first I need to rank via the result of column AD and if that is the same as another result use column AC to determine where they rank.
Is a way to calculate the difference between two columns in a Pivot table .
I have the data something like this in a pivot table....
Sum of MetricValueColumn LabelsRow LabelsFebruaryMarchAprilMayJuneJulyNet New My SitesNet New Team Sites0Number of Provisioned Users322059319906322372350239332914328404Total Capacity In Use (GB)1585.381722.761824.731947.772124.282262.78Total No. of My Sites208212316924682307313313134317Total No. of Team Sites101751082311396683273227940
What i need to do is to calculate the "Net New My Sites" and "Net New Team Sites" values something like this.... Net New My Sites (March) = Total No. of My Sites(March) - Total No. of My Sites(February) Net New My Sites (April) = Total No. of My Sites(April) - Total No. of My Sites(March)
See attachment. In this example, in Column D I want to calculate the percent difference between the numbers in the last 2 columns (Column B and Column C). BUT I want a formula that will automatically update if I were to insert a new column between Column C and Column D. So as a result, new numbers would go in Column D and the percent difference would now be in Column E.
I've been trying to loop data for column A from row 1 until 6 and print the result on specified cell. But the problem is, it keeps looping until column B,C and D.
I want to calculate average result separately for column B,C, and D without taking the previous data.
Here is the code that I've done.
VB: Sub Avg() col = 1 Row = 1 Do Name = ThisWorkbook.Sheets("Sheet2").Cells(Row, col).Value If Name <> "#" Then
[Code] ....
I attached my excel. The green box indicate the result that I want : function.xls
I am trying to create a formula that is able to calculate an end result based on the cell contents of 3 columns, the results are predefined in 3 other columns, here D, E & F
For example:
Column A Column B Column C Column D Column E Column F Column G (Results) Royal Mail 1 100 2.8 2.3 1.2 Royal Mail 2 100 2.9 2.4 1.3 Royal Mail 3 100 3.0 2.5 1.4 DPD 5 200 4.5 2.8 1.5 DPOST 1 100 1.2 3.2 1.7
I am trying to create a calculation that in Column G will work out, IF Column A=Royal Mail AND Column B=1 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=2 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=3 AND Column C<=100 THEN [@[Column F]], IF Column A=DPD AND Column B=5 AND Column C<=200 THEN [@[Column E]], IF Column A=DPOST AND Column B=1 AND Column C<=100 THEN [@[Column D]]
Here are an example of what I have tried, amongst many...
=IF(AND(AND([@[Default Post Postal Service]]="Royal Mail"),AND([@[Default Postal Format]]=1),AND([@Weight]<=100)),1,0) Everything is zero.
The left contains data input and the right Columns contains certain formula.
How do I set it up so that the worksheet can eg. Calculate 5 rows and rest 1 Second and continue this way until it reached the end of the rows? (Number of rows is not fixed).
I have a column of data where the seperate entities are divided by blank rows. for example: i need to calculate sum(G3:G15) then skip the blank row (G16) and calculate the next group, say sum(G17:G50) and export that import to a new worksheet.
The issue is that the column lengths vary from day to day so the blank rows will not be in the same position.
It's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
I have long series of data in 8 columns (B, F, J, N, R, V, Z, AD) starting at row 5 down to row 86404. I want to find the total median for each row, where a condition is met for that row. The condition is if number>10 and the number is located in row 3 for each column (i.e., B3 for column B). So, if B3, J3, R3 are all >10, then I want to find the median for all the numbers in the columns B,J,R.
I assume there is an array formula that could do this? I've tried a few solutions with no luck.
I have a Pivot Table. I have two Columns Currently Current Week and Previous Week. The Values are displayed as a count for the Status Field. I would like to know if it is possible to add a calculated formula that will take the count difference between Current Week and Previous Week?
create a macro that will find and calculate based on the details of 4 columns on the same spreadsheet.
Basically, here is what I need to do:
1. Need to calculate how many QTY IN (Column F) and PALLETS IN (Column I) of a specific PART# (Column A) and LOT CODE (Column B) For example if enter a PART # and LOT CODE, it will calculate how many QTY IN and PALLET IN of that PART # and LOT CODE.
2. Need to do the same for QTY OUT (Column G) and PALLETS OUT (Column J) also.
3. Output should contain the PALLET # , QTY IN and PALLETS IN based on the PART # and LOT CODE search. I just want to simplify the search function in this spreadsheet because it is very cumbersome if you need to find how many items left for that PART # and LOT CODE.
I have 2 Columns of Holiday Dates (Column A is the "FROM" date; and Column B is the 'TO' date) and Column C is Peoples Names corresponding to the Holiday dates:
ie:
COLUMN 1 ; COLUMN 2 ; COLUMN 3 A1= 2 Jan 13 ; B1= 10 Jan 13 ; C1= Tom A2= 4 May 13 ; B2= 10 Jun 13 ; C2= John A3= 7 Jul 13 ; B3= 10 Jul 13 ; C3= Tom A4= 3 Aug 13 ; B4= 25 Aug 13 ; C4= John A5= 6 Dec 13 ; B5= 15 Dec 13 ; C5= John.
I am trying to figure out a formula (eg SUMIF) to calculate and summarize the number of Days Holiday based on a person's name (eg Tom's total Number of days Holiday days) based on the above column configuration of Dates and Names.
This is really hard to explain by words. check the 2 files I attached in this post. I checked VIRUS already. NO VIRUS. I have the table like in FROM.xls and I want to change it to a table like in BECOME.xls -automatically- because I have more than 5000 records in my 'real' file.
I am looking to change a row colour if any type of data is entered into a specific cell.
Context: In column H entitled 'Start Date' when someone enters a date n any format into this box, I want the whole row to change colour to easily see what projects have started and what ones havent.
