I have 100 Rows of Data with 2 Columns.
The left contains data input and the right Columns contains certain formula.
How do I set it up so that the worksheet can eg. Calculate 5 rows and rest 1 Second and continue this way until it reached the end of the rows? (Number of rows is not fixed).
I am trying to do is calculate (sum) results data for time intervals. For example, between 0500-0559hrs then 0600-0659hrs and so on. Data is collected at 1 minute intervals and may have a result of 0 or anywhere up to 30.
Column A has all time data e.g. 0500,0501,0502 etc
Column B has sum of instances e.g. 0,1,2,3 etc
Currently i have a spreadsheet with realtime data feeds from Bloomberg (or reuters). What i would like to do is:
a. Fill a vector/column of data values every minute until we have 30 observations i.e. from 9.00am till 9.30pm
b. This will then allow me to calculate a moving average of the last 30 (1 minute) observations.
c. At 9.31am, the 9.00am value drops out of the column and is replaced by the observation at 9.31am. This results in a constantly updating column of the last 30 minute observations and will allow me to have a realtime moving average.
I want to calculate time difference from two columns,
00:00:18:4400:00:28:44
00:00:19:2400:00:29:24
00:00:34:7700:00:44:77
00:01:05:3200:01:15:32
00:01:05:3200:01:15:32
wanting the difference between col B and col a.
Sum doesn't work
Below is the code i want to be run evey 2 minutes Thanks
Sub WebData()
Dim wSU As Worksheet
Dim wSR As Worksheet
Dim wSS As Worksheet
Dim iForRow As Integer
Dim iLastRow As Integer
Dim sURL As String
Count the number of occurences on 1 day within a 60 minute timeframe. data includes dates and times
View 5 Replies View RelatedI'm the Held desk manager . I'll have my folks logging in every time interval and work for 9hrs. Now I wanted to see at any given point a day the number of folks I have on my desk .
I have created table " A " and I'm looking for a formulae so that I get my data like table " B " .
To give more insight about table '" B " - During 00:00 - 00:30 , I'll have 41 people slowly goes down as people log off..
I need to compare how many incidents are created within a 15 min interval and populate the sum.
I currently have the create time of the incident in the format below, assume each date below is an incident. I have a column with 96 intervals (24hours) ie 8:00,8:15,8:30,8:45,9:00 etc.... Using a formula how can I say "if create time is between *:00 and *15 count 1 and put the number into the cell and do that for each interval?
A B
------|-------------------|
Int Incident
0 | 8:00 | 1/28/2008 8:32 AM
0 | 8:15 | 1/28/2008 8:35 AM
3 | 8:30 | 1/28/2008 8:41 AM
1 | 8:45 | 1/28/2008 8:46 AM
The code from this page works perfectly when I am running one macro at a set interval: [url]
However, when I try to run multiple macros at different set intervals the order of execution gets messed up.
For example, I need macro1 to run at 00:00:30, macro2 at 00:00:45, macro3 at 00:01:00, then macro1 at 00:01:30, macro2 at 00:01:45, macro3 at 00:02:00 and so one.
Office 2003 with Windows XP
This is my first post so i may not have done everything correctly. I tried doing google searches to see if anyone else has done something similar but its a tricky thing to search for. I have found pages dealing with manipulating time but none seem to be what I want
I have an Excel sheet with data
A1=date
b1=source
C1-h1 all contain data (name, location, etc, etc) but I am not interested in those.
A1 (the date cell) is formatted like: m/d/yyyy" "h:mm:ss AM/PM
[Sample]
a2 = 8/1/2006 12:20:23 AM b2 = phone
a3 = 8/1/2006 12:21:13 AM b3 = email
a4 = 8/1/2006 12:33:03 AM b4 = phone
This is what I am trying to accomplish:
I want to break each hour, whether it contains data or not and get a count of the different types of source
my desired output would be:
time Phone email
12:00AM
to 2 3
12:30AM
My problem occurs because I am unsure how to break the times down into intervals. In my head, I would create a new column and try to break the time up into an interval. So for a2 (8/1/2006 12:20:23 AM), I think I would need to break the date and time up and then determine which interval would be needed based on the time.
I was going to perform the following:
=text(a2, "h" + if("mm:ss">30, 30,00)
Basically, pull the hour from a2 and evaluate the mins/secs.
If the min/sec is bigger than 30, put a 30 in the box. Less than 30, put double zero in the box. So for 8/1/2006 12:20:23 AM, b2 would have 12:00 since it falls in the 12 to 12:30 interval.
Once I have all the intervals, I would also need to preform a count on the source cell but I think I can use a vlookup to get the count for the interval.
I have a spreadsheet set up that has a series of timestamps and values. Please find a copy attached. I need to set up a macro that will allocate the timestamp in column C to an interval of time, e.g between 12:30 - 13:00.
To achieve this I tried to set the following code up in VBA, which would input a letter in a blank cell based on the time interval that the timestampin column C falls into, for example if the timestamp is > 12:30 and < 13:00 then "A"...the plan was to extend this concept to accomodate all of possible the time intervals I have.
Sub time_intervals()
Dim x As Integer
Dim lastrow As Long
Dim timeA As Date
Dim timeB As Date
Dim timeC As Date
Dim timeD As Date
Dim timeE As Date
The idea was that the timemaster value would be the timestamp in column C of my spreadsheet and the timeA,timeB,timeC etc would reference the timeintervals. However this does not seem to work as the value returned by my if statement is always incorrect - for example timemaster in cell C2 is less than timeA but the if statement always returns FALSE as opposed to "A"
I am trying to continually refresh a spreadsheet (it is a countdown timer), and i am looking for a way to do this other than hold "F9". It is excel 97.
View 2 Replies View RelatedI'm trying to do a line chart showing two teams and their cumulative scores over the period of a game. I've attached a sample with mock data. Is it possible to change the x-series of the charts to display custom time intervals like 0 min 1 min, 2 min, 3 min, 4 min, etc? Currently the x-series only has labels for each specific time there was a change in value. I've tried to change the scale but the options that I want aren't there.
View 2 Replies View RelatedI have posted earlier thread on similar problem but i did not get much response.I am really having a tough time to record a macro, where my columns will be selected with an interval and then will be pasted in to another sheet....
View 6 Replies View RelatedI have 134 parts and each part is available in 5 price groups - these are static items that need no calculation as they are completed on another worksheet. I have 400+ "items" each item is made up of various parts. I need to calculate the cost of each item. Hard to explain without example so I have attached an example.
View 2 Replies View RelatedI have a table with changing length of the rows and columns. I need to calculate the sums of the rows, the columns ad the diagonal. I managed to write a working code for the columns, but have no success with the rest. Here is what I have:
View 4 Replies View RelatedCode copies the first two columns of a many column table and pastes them at a certain interval (14 columns) to make transfer to a report easy. The problem is that the worksheets each have a different number of columns, but none more than 56 columns. The macro works wonders on the first sheet, but thereafter does not work at all. The first sheet has 27 columns, the second sheet only has 4 columns and the one after has 38 or something.
Option Explicit
Public iMaleGroup As Integer
Public iFemaleGroup As Integer
Public iMaleAnimal As Integer
Public iFemaleAnimal As Integer
Public iMaleGroup1 As Integer
Public iFemaleGroup1 As Integer
Public StudyTitle As String
Public SmallAnimal As Boolean
Sub CommandModule()
Dim Wrkst As Worksheet
Dim wsName As String
Dim wsSubject As String
Dim wsNumber As String
Dim rSummaryHeader As Range
Dim MergedHeader
Dim NextMergedHeader
Dim HeaderRange
Dim AddHeader
Dim TableHeader
Dim SumTableHeader
Dim PasteRange
Dim x As Integer
Dim n As Integer
Dim z As Integer
Dim i As Integer
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False ............................
I have a macro that works great to hide rows with zeros in a specific column on one sheet. It is below:
Sub Hide_Rows()
Dim i As Integer
ActiveSheet.Unprotect Password:="Yourpassword"
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
For i = 9 To 408
If Sheets("Tasks and times"). Range("H" & i).Value = 0 Then
Rows(i & ":" & i).EntireRow.Hidden = True
End If
Next i
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
ActiveSheet.Protect Password:="Yourpassword"
End Sub
My problem is that now I want to adapt it to also hide columns on another sheet in the same workbook (named OBS). This is because in the first sheet rows 9 through 408 are used for data but that range is divided into 25 sets of 16 rows. Each set corresponds to a column on the other sheet starting at column C. I would like the corresponding column to hide when the first row of each set (i.e. rows 9, 25, 41, etc.) are hidden.
I wonder if Excel allows scrolling many columns or rows at a time. That's right, I have a worksheet with frozen panes by "D2" cell; then there are sets of 4 columns for each day of the month (for example "D:G", "H:K" and so on). I need when I scroll horizontally, that every first column of the set to snap at the edge of pane at once. In other words, is any elegant way that usual scrolling pace of one column/row at a time to be changed to 4 at a time?
View 3 Replies View RelatedIs there a formula I can use, where I can delete specific rows/columns each time? I have to download a large set of data each week and each time I have to spend hours deleting the same rows and columns. For example, if I have to delete Rows 1,2,3,4,5 and Columns J,I,H,G every time, how do I automate this?
View 10 Replies View RelatedI want to create 15 minute time intervals from the data. I attached the file for reference. I would like to sum the data column that corresponds to each interval. I created an example using the formulas and I want to be able to do that automatically either using VBA or the formulas.
View 5 Replies View RelatedIt's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
In the attached excel file I'd like to use data that was polled every 15 minutes. i.e 00:15, 00:30, 00:45, etc. Can I do this without having to manually delete all the nonrequired data per each row?
Also I have many files of such data that and would like to combine the all them into one to represent data for the whole year polled at every 15 minutes.
I have a data table with incidents in which one column is equipment number and one is data of occurrence. I now need to calculate how long ago the same equipment number occurred.
View 2 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
production01.png
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Excel 2007
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedColumn A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View 6 Replies View RelatedI have a problem here:
Eg.
A B C D E F G H I
1 8 pm 9 pm 10 pm 11 pm 12 am 1 am 2 am
2 8 pm 11 pm
3 8 pm 2 am
I typed a formula : =if(and(c$1>=$a2,d$1
