I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I'm working with Loan amounts and i need to know how to set a excel spread sheet to conditionally format a cell that causes a sum formula to exceed a preset limit.
I have put together a sort of hire chart for a charity that hires out scooters/wheelchairs.
All the formulas were done and then they said that they sometimes hire out extra equipment with the chairs as well.
I have created an 'extras' column but I'm having nightmares trying to integrate it into the current formula.
I have just changed the first 3 rows to experiment with.
There is a basic cost of £2 per week or part of a week, that price is regulated from the master page.
Column P calculates the rate from the weeks/days and uses the master page as the source of costing.
I have created a column 'C' for the extras and tried to integrate it into the already complicated formula.
Unfortunately, although it seems to work, it won't work if the cost is lower than £9. At that point, it doesn't matter what I do in column C, it just ignores column C
When it gets to £12 it seems to take notice of column C, very strange.
I have this problem where the SUM function is returning 0. The context is this- I am simulating values using RAND() and looking up the values corersponding to probabilities from a different tables. I then use the TRIM function to return the value I need, and the final number is of a "general" format.
This is the formula in the column I wish to sum:
And this is dragged down the column.
When I change the cells using =VALUE(cell) the SUM function then returns the required value. Oddly the SUMPRODUCT function seems to work.
Calculation is set to automatic and the cell has been formatted as a number.
I need a formula for H2 to multiply the value if it is in any one of the cells in B2 - B6 by the appropriate value to calculate the annual total. Such as if the number is in weekly column it would multiply by 52, fortnightly 26, monthly 12, quarterly 4 and annually 1.
Weekly Fortnightly Monthly Quarterly Annually Ann Totals Mortgage 1000.00 Council Tax/Water/Sewerage 1000.00
I have students Kg-5th Gr. I need to identify the ones over-aged when I enter the information. The following is what I'm trying to use but I get Y1 for ever cell. I need it to Identify the student as Y1 for One year overage and Y2 for tow years overage.
I've got a single column worksheet with a varying numbers of characters in each row.
At the end of each row's cell value I must add a 5 char string. Preceding that string I must have enough spaces to make the total length of each row 106 characters.
I've already:Defined and populated the string. Let's call it "strMyString".Established how many rows are in the sheet and stored it in "lngUsedRange"Written the following which cycles through each row establishing how many spaces need to be added:
Dim lngSpacesNeeded As Long
For i = 1 To lngUsedRange lngSpacesNeeded = 101 - Len(Range("A" & i)) Next i
Now I just need to know what else to put before "Next i" to locate the end of the existing text in the cell and add the number of spaces in "lngSpacesNeeded" then add "strMyString".
I have a spreadsheet which has a column that contains route numbers (for collection of goods). Some addresses have 2 or 3 route numbers within the same cell i.e.
3 3 20 3 20 15
I would like to know the formula for counting the number of cells that contain each route number i.e. from above 3 = 3, 20 = 2, 15 = 1
I have a large spreadsheet which includes many rows whose number format needs to change depending on the value of a specific cell.
So for example:
If cell B20 has value "A", cells Q20:AG20 should display as 1,234 If cell B20 has value "B", cells Q20:AG20 should display as 5.6% If cell B20 has value "C", cells Q20:AG20 should display as 7.89 Etc...
As conditional formatting does not seem to include a number format option I've worked out that I need some sort of macro to change these settings for me, either automatically whenever the value of B20 changes or, more likely, when I manually choose to run the macro.
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate() With Application .Calculation = xlManual .MaxChange = 0.001 .CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
I have a VBA method that goes thru and calculates a bunch of stuff and puts this calculated info into a static data structure. This method is called 'setProjectInfo()'. This method is reliant on values on my worksheets, So as the user makes changes to the worksheet, I want setProjectInfo() to get called so it refreshes the data structure with updated information. I then have a bunch of helper methods to access different parts of this data structure. These helper methods are used in the formulae of a bunch of cells on a worksheet (ie '=getPercentComplete(period)', etc, etc).
This is all working well except for one thing. Sometimes the helper methods get called BEFORE setProjectInfo() gets called.. So, the helper methods return stale information. I can only get around this by manually recalculating the spreadsheet again. setProjectInfo() does enough stuff and takes a long enough time that I don't want to have to call it at the top of each helper method.
I've put the call to setProjectInfo() in a cell formula at the top of the my spreadsheet in hopes that Excel would know enough to call it first.. But that does not seem to work. Net, how can I get VBA to always call setProjectInfo() BEFORE it calls any other VBA methods?
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code: Sub test() Dim Mycount As Single Mycount = Application.Count(Range("A:A")) Cells(1, 4) = Mycount End Sub
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
I'm trying to write an IF formula that will return a number if the word in the adjacent cell begins with a specific letter. Here's what I want to show:
City 01
Express 02
Overnight 03
So "C" would return 01, "E" would return 02 and "O" would return 03.
I have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:
Microsoft Excel 2010 Workbook Name: TASERR Model - 06-26-13.xlsm
In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
I wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.
For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?
I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
How to translate a specific number into a specific letter related to the number itself.
I have lots of different numbers for example all going down a specific cell (These numbers I want to separate into 3 different catagories. The positive numbers I want to be calculated as the same Letter that is next to that row directly over to the left of that cell.
So if the letter
B / cell / cell / +9 / Then I want if its a positive number like +9 to answer in the formula with the same letter (B) listed to the right in the same row in a different cell of course
B / cell / cell / -6 / Then I want if its any negative number like -6 to answer in the formula as the opposite Letter of (P) listed to the right in the same row in a different cell of course
P / cell / cell / +17 / Then I want if its a positive number like +17 to answer in the formula as the same letter (P) listed to the right in the same row in a different cell of course
P / cell / cell / -3 / Then I want if its a negative number like -3 to answer in the formula as the opposite Letter of (B) listed to the right in the same row in a different cell of course
and thirdly if its a (0) zero and only (zero's) Then I want the answer to stay (0) zero.
The number can be any numbers it doesn't matter. Only distinction is that positive number of +1 and up repeat and stay the same letter that the cell on the far left is already stated.
and all the negative number of -1 amd below all reverse the letter to the opposite letter of (B to a P) or (P to a B) listed to the right in the same row in a different cell of course
and of course (0) zero would be listed as a positive number and only return a (0) zero as the result of the formula.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.