Calculation With A Blank Cell?
Feb 17, 2012
I am working with a pricing worksheet using the following formula to calculate my selling price. My problem arises when I have either one of the Exchange Rate fields blank or zero. Typically one or the other Exchange Rate would be used, and I have to be sure the one not being used is set to at least 1 or I get an error. Preferably I would like the cell to be ignored if it is blank. I've tried several options but cannot get anything to work.
I'm currently using this formula where the cells have defined names (ie US_EXCHANGE) and F# is my cost.
=F8*(IF(US_EXCHANGE=0,"",US_EXCHANGE*1))*(IF(EURO_EXCHANGE=0,"",EURO_EXCHANGE*1))*MARK_UP*FREIGHT
View 6 Replies
ADVERTISEMENT
Jan 17, 2013
In one cell I have the formula =EDATE(D4,3) which looks to the cell to the left (which has a date in it) and in this case with the 3 it gives me a date three months in advance of the date in the cell to the left. This is for sites I visit quarterly. Then for those I visit monthly obviously the 3 is replaced with a 1. so in the cell I get the date when I next need to do my visit.
In the cell to the RIGHT of the cell which has the formula-generated date in it, is a cell in which I manually enter the date on which the next visit took place. In some cases I can't put anything into this cell because I've not been to revisit the place and so I can't put a date in. In the column to the right of this I've got the same formula as referred to above but, because the cell to the left is blank, it's returning a value which makes no sense and really, I'd prefer it that if the cell to the left is blank, the formula doesn't return any value (just leaves a blank cell instead).
So, what would I have to add to the formula above or what would I have to do to get it that if the cell to the left is blank, the formula is still there, but just returns a blank cell???
View 1 Replies
View Related
Sep 3, 2009
I have an array formula that calculates the average of numbers between two dates:
{=AVERAGE(IF('Date Range'!$B:$B>$H$4,IF('Date Range'!$B:$B<=$B$3,'Numbers to Sum'!$C:$C)))*100}
The start date is the day after the date in H4 and the end date is in cell B3. The dates are in column B and the numbers to sum associated with these dates are in column C.
Some of the cells in column C are blank and my formula is taking these blanks into account in calculating the average, while I would prefer not to count them in the calculation.
Can someone please suggest how I could amend the formula above to accommodate this?
View 8 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Aug 12, 2014
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
View 5 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
May 8, 2014
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
View 5 Replies
View Related
Jul 28, 2014
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
View 2 Replies
View Related
Jan 7, 2013
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies
View Related
Apr 3, 2014
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies
View Related
Feb 4, 2009
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies
View Related
Jul 11, 2007
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
View 9 Replies
View Related
Dec 21, 2012
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub
If Target.Count > 1 Then Exit Sub
Range("A2").ClearContents
End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
View 3 Replies
View Related
Oct 31, 2013
which will calculate value of a cell when one of the variables has been changed?
To illustrate what I have in mind, an ecxample:
* User can add values to cells using UserForm
- Component name (to Cell "A1")
- Component price (to Cell "B1")
- Component quantity (to Cell "C1")
[Code]....
View 3 Replies
View Related
Jan 23, 2013
I have a list of prices but some cells contain multiple values where the value has changed. I need a formula that will use the last value in a cell.
Example below. As you can see the result column has now value as its using $3.41$3.117 in the calculation (I need it to use $3.117)
Price
Uplift
Calculation
Result
[Code]....
View 4 Replies
View Related
Nov 11, 2013
I am trying to return a cell with a simple yes or no answer and having a little difficulty.
I have entered the following formula which is returning #NAME
=IF(E4<=1.25,ORH4<=0.01,yes)
Calculation needs to be as follows:
Install Cost <1.25 and Profit atleast 0.01
The YES NO needs to be in the Invite? column
View 4 Replies
View Related
Feb 15, 2008
I have this formula: =IF(ROWS(H$12:H12)
View 9 Replies
View Related
May 20, 2008
How to use macro to build a calculation in excel using macro, so every time I type a number another cell it has value calculated without click "run" macro.
For example, I want to sum value in Range from F8 to FinalRow automatically, For example, I fill in 3 in D8, 4 in E8 and F8 show value 7; I fill in 4 in D9, 9 in E9 and F9 show value 13.
What is code for this?
View 9 Replies
View Related
Dec 17, 2007
I tried all those search and have no idea what to look for, sorry.
I have attached a single sheet with Footpath Budget for you to see.
In J6, we put in Y or N for Yes or No if there's a nature strip along the footpath.
Now, in cell G49 gives us the total square meters of nature strip.
What I want to do is if I put N in cell J6, cell G49 should be empty or zero because N means there's no nature strip. But if I put Y in J6, then cell G49 can give us total squares from cell C43.
So what formulas can I put in cell G49?
View 3 Replies
View Related
Nov 19, 2013
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
View 2 Replies
View Related
Jul 31, 2009
I'm working with Loan amounts and i need to know how to set a excel spread sheet to conditionally format a cell that causes a sum formula to exceed a preset limit.
Example ...
View 9 Replies
View Related
Dec 14, 2012
I'm developing a financial spreadsheet.
I've got a cell "Taxable Income" and another cell "Tax on Taxable Income" in sheet2.
When I enter a value in "Taxable Income" I want "Tax on Taxable Income" to automatically calculate based on formulas in sheet1. I don't know how to get "Tax on Taxable Income" to determine which formula to apply from the different tax brackets.
For example:
If taxable income is <$18201, tax = $o
If taxable income is between $18201 and $37000, Tax on Taxable Income =0.19*Taxable Income
If taxable income is between $37001 and $80000, Tax on Taxable Income =3572+0.325*(Taxable Income - $37000)
The idea behind having formulas in a different sheet is so over time when tax rates/brackets change I only have to change the formulas on one sheet.
I know how to use basic AND, IF statements e.t.c but I can't seem to get the syntax right for this to work.
View 1 Replies
View Related
Nov 17, 2009
I would like to have a cell in which there is descriptive text and the results of a calculation. For example, in row 2, I want to state the current total number of items in inventory at the top of the sheet in the center of the used cells.
Inventory Total is: SUM(A4:A64,000) as of: Date()
I can't merge cells or manipulate the text in such a way to neatly bring the text and calculation together. And there are actually 2 calculations in the example above. One to SUM the items and one to add the date.
View 5 Replies
View Related
Nov 14, 2008
I want to calculate ONLY if a cell is > the number manually entered in another cell, otherwise, I want the cell to populate with 0.
I need assistance with combining the following into a single calculation:
IF D11 is > D10, then D14 should = sum of D12-D10
If D11 is
View 9 Replies
View Related
Aug 21, 2009
Would it be possible to calculate difference between 2 or more dates in the same Cell?
Dates are in the format shown below (Always seperated by a comma):
Cell A1 = 29Jan2009, 31Jan2009, 14Feb2009, 27Feb2009, 31Mar2009.
In the above case there are only 5 sets of dates, in some cases there are more and in some cases there are less. Between Min 2 dates - Max 7 dates.
Am looking for a result like : 2,14,13,12
Am not well versed with VBA, hence would prefer a formula. Currently am doing Text to Column and working on the same. And that process is time consuming. Would there be a short cut ?
View 9 Replies
View Related
Oct 5, 2009
Im trying to work out a function that will calculate the average accross a 3 column array. Obviously there is but I need to make any cell's with 'Free' give a value of 0.
I need some kind of IF("Free",1) type thing, to run before the average calculation, but I dont know how to put it together to make it work, I thought about a Loop, but then how do I make sure it only goes to the next cell in the selection?
View 9 Replies
View Related
Nov 21, 2007
I have made a macro to nominate a % rate in an input box , then have a value multiplied by this rate. Now i need the macro to place the rate followed by a '%' symbol in the cell below.
View 9 Replies
View Related
