In one cell I have the formula =EDATE(D4,3) which looks to the cell to the left (which has a date in it) and in this case with the 3 it gives me a date three months in advance of the date in the cell to the left. This is for sites I visit quarterly. Then for those I visit monthly obviously the 3 is replaced with a 1. so in the cell I get the date when I next need to do my visit.
In the cell to the RIGHT of the cell which has the formula-generated date in it, is a cell in which I manually enter the date on which the next visit took place. In some cases I can't put anything into this cell because I've not been to revisit the place and so I can't put a date in. In the column to the right of this I've got the same formula as referred to above but, because the cell to the left is blank, it's returning a value which makes no sense and really, I'd prefer it that if the cell to the left is blank, the formula doesn't return any value (just leaves a blank cell instead).
So, what would I have to add to the formula above or what would I have to do to get it that if the cell to the left is blank, the formula is still there, but just returns a blank cell???
I am working with a pricing worksheet using the following formula to calculate my selling price. My problem arises when I have either one of the Exchange Rate fields blank or zero. Typically one or the other Exchange Rate would be used, and I have to be sure the one not being used is set to at least 1 or I get an error. Preferably I would like the cell to be ignored if it is blank. I've tried several options but cannot get anything to work.
I'm currently using this formula where the cells have defined names (ie US_EXCHANGE) and F# is my cost.
I have an array formula that calculates the average of numbers between two dates:
{=AVERAGE(IF('Date Range'!$B:$B>$H$4,IF('Date Range'!$B:$B<=$B$3,'Numbers to Sum'!$C:$C)))*100}
The start date is the day after the date in H4 and the end date is in cell B3. The dates are in column B and the numbers to sum associated with these dates are in column C.
Some of the cells in column C are blank and my formula is taking these blanks into account in calculating the average, while I would prefer not to count them in the calculation.
Can someone please suggest how I could amend the formula above to accommodate this?
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub If Target.Count > 1 Then Exit Sub Range("A2").ClearContents End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
How to use macro to build a calculation in excel using macro, so every time I type a number another cell it has value calculated without click "run" macro.
For example, I want to sum value in Range from F8 to FinalRow automatically, For example, I fill in 3 in D8, 4 in E8 and F8 show value 7; I fill in 4 in D9, 9 in E9 and F9 show value 13.
I tried all those search and have no idea what to look for, sorry.
I have attached a single sheet with Footpath Budget for you to see.
In J6, we put in Y or N for Yes or No if there's a nature strip along the footpath.
Now, in cell G49 gives us the total square meters of nature strip.
What I want to do is if I put N in cell J6, cell G49 should be empty or zero because N means there's no nature strip. But if I put Y in J6, then cell G49 can give us total squares from cell C43.
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g Started Finishes
12-Nov-13 12-Dec-13
30-Jan-00
09-Nov-13 09-Dec-13
11-Nov-13 11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
I'm working with Loan amounts and i need to know how to set a excel spread sheet to conditionally format a cell that causes a sum formula to exceed a preset limit.
I've got a cell "Taxable Income" and another cell "Tax on Taxable Income" in sheet2.
When I enter a value in "Taxable Income" I want "Tax on Taxable Income" to automatically calculate based on formulas in sheet1. I don't know how to get "Tax on Taxable Income" to determine which formula to apply from the different tax brackets.
For example: If taxable income is <$18201, tax = $o If taxable income is between $18201 and $37000, Tax on Taxable Income =0.19*Taxable Income If taxable income is between $37001 and $80000, Tax on Taxable Income =3572+0.325*(Taxable Income - $37000)
The idea behind having formulas in a different sheet is so over time when tax rates/brackets change I only have to change the formulas on one sheet.
I know how to use basic AND, IF statements e.t.c but I can't seem to get the syntax right for this to work.
I would like to have a cell in which there is descriptive text and the results of a calculation. For example, in row 2, I want to state the current total number of items in inventory at the top of the sheet in the center of the used cells.
Inventory Total is: SUM(A4:A64,000) as of: Date()
I can't merge cells or manipulate the text in such a way to neatly bring the text and calculation together. And there are actually 2 calculations in the example above. One to SUM the items and one to add the date.
In the above case there are only 5 sets of dates, in some cases there are more and in some cases there are less. Between Min 2 dates - Max 7 dates.
Am looking for a result like : 2,14,13,12
Am not well versed with VBA, hence would prefer a formula. Currently am doing Text to Column and working on the same. And that process is time consuming. Would there be a short cut ?
Im trying to work out a function that will calculate the average accross a 3 column array. Obviously there is but I need to make any cell's with 'Free' give a value of 0.
I need some kind of IF("Free",1) type thing, to run before the average calculation, but I dont know how to put it together to make it work, I thought about a Loop, but then how do I make sure it only goes to the next cell in the selection?
I have made a macro to nominate a % rate in an input box , then have a value multiplied by this rate. Now i need the macro to place the rate followed by a '%' symbol in the cell below.
