Call One Macro From Multiple Buttons - With Specifics As Needed
May 10, 2009
I've searched through the forums for this information, and I have found a couple of similar issues that have been solved, but copy+pasting the code into my form has not had favorable results.
Basically, here is what I am after:
I have a sheet that already has 4 buttons active, with a handful of other subs that they are calling. I am wanting to be able to add new buttons and have them call a universal macro that will forward them to my existing subs. However, I'm wanting a variable to be set based on the Caption of the button that was clicked. For example:
View 14 Replies
ADVERTISEMENT
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Jun 27, 2014
I want to be able to call one user form from multiple ActiveX command buttons. The problem is, the number of command buttons depends on user input on another worksheet, so it's variable.
I've renamed all of the command buttons so they are named "CommandButton" & i, where i is an integer between 1 and, say, 200. I want each of these buttons to direct to the same UserForm where additional information can be entered.
I can't think of a way around the event-handler procedure name.
Sub [Command Button Name]_Click
to call the User Form. I won't know the command button names, because I won't know how many there are (max i) until the user inputs.
Basically, I want to create a For loop through the max i and have the event-handlers call the user form
View 14 Replies
View Related
Jul 10, 2009
I need a VBA code to remove multiple macro buttons from 31 multiple excel sheets with a single click.
View 9 Replies
View Related
Mar 6, 2008
I'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.
View 5 Replies
View Related
Nov 16, 2009
Is it possible to seperate this sheet by Time - using column F, anything which is between the hours of 07:00 - 09:00 and 16:00 - 19:00? Response - column I - times up to 60 mins - 61 - 120 mins and over 120 mins
View 5 Replies
View Related
Feb 21, 2008
I am revamping someones Monthly Stat sheet for them. I am hoping to get a code that will copy the most current sheet which will always be the last one of the Workbook. I then would like the user to be Prompted to rename the sheet (Unless it can automatically generate the name which would be the next month). For example the sheet I need to copy is currently "January 2008" AND THE new sheet should be titled February 2008. At the end of February they need to run the code again and the sheet will of course be named March 2008 and so on...
The other thing I need to do is after the sheet is named:
1) I need the sheet named placed in cell A1 of the NEW sheet
2) I need to copy the VALUES in E9 to O9 and Paste them into E5 to 05 of the Newly created sheet
View 9 Replies
View Related
Feb 5, 2012
I'm in need of some VBA code to control the updating of information from 16 active workbooks to a master workbook and vise versa. I would like it on command as it slows down the use of the workbooks when they calculate after every change of data as they are being used. These workbooks are connected over a company intranet and are used 24/7.
The desire is that cells in the master workbook will read specific cells on each of the other workbooks and complete a "map display" of the data. The data is not in a column or row range side by side but scattered across the sheet to form a map when data is entered.
I've tried using code to open and close the workbook with on time events but that hasn't worked.
View 5 Replies
View Related
Jan 31, 2009
I have a macro on: Sheet101 (DAY 1) that adds additional sheets.
Example: When I click active button it will add Sheet102 (DAY 2) & can add up to Sheet130 (DAY 30)
I want a macro that will delete any of the sheets added from Sheet130 (DAY 30) to Sheet102 (DAY 2) But WON'T Delete Sheet101 (DAY 1)
Example:
If I have added 3 sheets I want it to delete those 3 Sheets:
Sheet104 (DAY 4) <--DELETE
Sheet103 (DAY 3) <--DELETE
Sheet102 (DAY 2) <--DELETE
Sheet101 (DAY 1) <--DON'T DELETE
& give a vbOkCancel MessageBox saying: Do you want to Delete Added sheets?
Okay the code below works, but one thing!
It deletes DAY 30 to DAY 20, then it skips DAY 19 to DAY 10, then Deletes DAY 9 to DAY 1.
So it's not deleting DAY 10 to DAY 19...
Do I need to add a wildcard?
Here is the Code: .....
View 10 Replies
View Related
Oct 4, 2008
need a macro that will open the following folder
c: my documentskatyexcel
View 9 Replies
View Related
Jan 13, 2009
I've got this macro I pulled from some other site and it's not working quite like it should. In my eyes at least...
OK, first, a little back story...
At work we used to have a custom Outlook form that was used for submitting office supply order requests.
The form was stored on our public drive for all to access it when needed.
Well, the form broke somehow and no one knows how to fix it.
We need something to replace it.
Keep in mind that we have no access to the Internet, nor can we send/receive emails outside of the company.
So, I created a simple form in Excel with a drop-down list of all the items in the supply cage, a form field for the senders name, etc...
What the macro does is, it copies the active worksheet the form that just got filled out) to a new workbook (dropdown data is on other sheets in the original) and then opens Outlook (2003) to send it as an attachment.
The only catch is that when the email arrives the only thing filled out is the form fields, NOT the drop downs...
The ONLY way I can get the drop downs to send with data in them is to leave the original open.
Oh, and for some reason every time I sent this while testing, it would name the attachment Book1, Book 2, Book3, and so on. I can't have that...
Here's the code I'm currently using:
View 9 Replies
View Related
Jul 31, 2008
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
View 9 Replies
View Related
Nov 11, 2008
I need a slight mod to the below code which works perfectly otherwise. What it does is it divides whatever is in column K by 30 and puts in its relative cell in column M( There a bunch of mini tables below each other with blank rows in between).
The thing is sometimes there are characters in column K like "N/A" for instance and the macro crashes since its only designed to take into account numerical and blank cells in column K.
View 6 Replies
View Related
Apr 8, 2009
I have accounts that I need to compare to see if they exist on my system the account that has a listed date, exist on my system then if I can fill the dates in the accounts the match then I will be able to delete the other accounts that don’t have a date see attach file for more understanding.
View 2 Replies
View Related
Dec 14, 2006
I'm only starting to get into the Macro side of excel, and I've created a couple of macros to automatically format cell contents and the like.
However I'm having trouble trying to divide some cell contents by 100.
I have 2 files I'm working with, one contains information regarding cd's and percentages, however the percentages in this file cannot be formatted to percentages (so the powers that be say) for whatever reason.
I copy all this information into another file which does have the percentages formatted as percentages, the result is that the values get multiplied by 100.
So values that read:
100
50
50.25
for example, appear on the new sheet as:
10000%
50000%
5025%
Is it possible to write a macro that will divide these percentages by 100 so the read correctly as:
100%
50%
50.25%
the macro will have to work on selected ranges.
View 9 Replies
View Related
Apr 28, 2009
Is there anyone who can suggest a solution to my problem below ?
Basically, what I need is a macro which would ideally work like this:
if D32 = 1, then the background colour of D4 should be red
if D32 = 2, then the background colour of D4 should be orange
if D32 = 3, then the background colour of D4 should be yellow
if D32 = 4, then the background colour of D4 should be green
And then I plan to use it for columns E, F, G
View 9 Replies
View Related
Oct 14, 2008
i have the following spreadsheet with dummy data however, there is a before and after scenario i have posted is this possible with a macro ...
View 9 Replies
View Related
Jul 10, 2012
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
View 4 Replies
View Related
Aug 13, 2014
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
View 2 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
Jul 28, 2007
Calling a Sub from another Sub is quite common, how about a Sub that does nothing else but call all the subs to execute the entire job?
Will the subs run sequentially after one completes, or will there be the likley hood they will bump into each other causing all sorts of chaos.
View 9 Replies
View Related
May 21, 2006
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
View 4 Replies
View Related
Apr 29, 2014
I have UDF and would like to use a Macro Button to have it run whenever I need to. Now I have to disable macros with notification in trust center and after entering data, enable content. I have my UDF in a module, is it possible to have another module with a macro so I can run this UDF whenever I need to?
[Code] .....
View 7 Replies
View Related
Jan 27, 2010
I'm using this crude code to color multiple buttons at once. My query; Is there a way to make this code quicker and thus shorter?
View 2 Replies
View Related
Feb 4, 2012
I have a workbook with 20 worksheets. Sixteen of them represent the months and quarters of the year. On those 16 sheets, I would like to have two buttons (32 buttons in all). One button is to print (and does quite a bit of formatting) the report for that month and the other submits the report (formats, saves, and e-mails notifications) after the user completes it.
Rather than having to maintain 32 buttons, I would prefer to have two buttons that are available to each of the 16 sheets. Is there a way to do this?
View 4 Replies
View Related
Dec 9, 2008
I am having a small issue with my toggle buttons.
I have approximately 20 sheets that all have 4 toggle buttons on them. Coded as below (with different ranges for each button). So when I wrote them I took the easy (for me anyway) way and copied all the code for all the buttons in each sheet. (Buttons are named Zoom1, Zoom2 etc.)
Private Sub Zoom1_Click()
If Zoom1.Value = True Then
ActiveWindow.Zoom = 143
Range("A1").Select
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
Else
ActiveWindow.Zoom = 75
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
End If
End Sub.........
View 9 Replies
View Related
Feb 7, 2014
I am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB:
Public ClkBtn As String
Public CallMacro As String
Sub ItemCall()
[Code] ......
View 5 Replies
View Related
Jun 25, 2014
I am trying to write a sub that executes a sub in an xla add-in. How can that be done in general?
More specifically I am wondering whether it can be done with the limited info that I have about the add-in and the to be executed macro within the add-in.
assume the name of the xla add-in is test.xla. The add-in is locked. I therefore do not know the name of the sub to be executed nor do I know the "on action" name of the sub in the ribbon. All I have is the Ribbon button label. Assume the ribbon button label is "ButtonLabel".
Is it possible to call the macro just by knowing the ribbon button label? If yes, how does the script look like assuming the above xla and button name?
View 5 Replies
View Related
Nov 14, 2008
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
View 11 Replies
View Related
Sep 11, 2009
I have a macro call psc in one module
in a different module I would like to "call psc"
however, this does not work
View 9 Replies
View Related
