Buttons Available On Multiple Sheets?
Feb 4, 2012
I have a workbook with 20 worksheets. Sixteen of them represent the months and quarters of the year. On those 16 sheets, I would like to have two buttons (32 buttons in all). One button is to print (and does quite a bit of formatting) the report for that month and the other submits the report (formats, saves, and e-mails notifications) after the user completes it.
Rather than having to maintain 32 buttons, I would prefer to have two buttons that are available to each of the 16 sheets. Is there a way to do this?
View 4 Replies
ADVERTISEMENT
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
May 13, 2013
I run into is that many of our staff don't know there are tabs at the bottom of the page that show different worksheets. writing some VBA code that would grab the names of all the sheets and create a single sheet with the tabs listed as buttons that would hyperlink to each sheet of it's given name. Kind iof an index for the sheets.
Also bonus if 3 rows could be insterted on each of those pages with a button that links back to the index page.
View 1 Replies
View Related
May 27, 2014
I'm editing some else's workbook. He has a button on sheet 1 that creates sheets 2 ad 3. I can see and edit his old code. I need to add a differet button to these sheets and 3. I can easily do this once those pages are created, but I need those buttons to come up as the sheets are created from the button on sheet 1. T
View 4 Replies
View Related
Jan 27, 2010
I'm using this crude code to color multiple buttons at once. My query; Is there a way to make this code quicker and thus shorter?
View 2 Replies
View Related
Dec 9, 2008
I am having a small issue with my toggle buttons.
I have approximately 20 sheets that all have 4 toggle buttons on them. Coded as below (with different ranges for each button). So when I wrote them I took the easy (for me anyway) way and copied all the code for all the buttons in each sheet. (Buttons are named Zoom1, Zoom2 etc.)
Private Sub Zoom1_Click()
If Zoom1.Value = True Then
ActiveWindow.Zoom = 143
Range("A1").Select
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
Else
ActiveWindow.Zoom = 75
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
End If
End Sub.........
View 9 Replies
View Related
Jul 1, 2014
There are 10 rows of data, and would like to assign value at the end of each row as "initiated" "In the process" "Needs to be Reviewed" "Completed", by using Buttons with different macros.
View 2 Replies
View Related
May 5, 2014
I have a series of rows and columns. Each intersection has a formula. I want to be able to manually enter text in the cells that contain formulas but then click a button next to the row if I want the formulas back. Here's what I have written so far. Is there an easier way to write these OR is there a more streamlined way of accomplishing what I'm after? There will be about 39 rows and 39 associated buttons.
(The screenupdating lines are there just because I don't want the screen to flash in any way when I click the button)
Code:
Sub Button1_Click()
Application.ScreenUpdating = False
Range("C28") = "=IF(AF74=0,"""",AF74)"
Range("G28") = "=IF(AG74=0,"""",AG74)"
[Code].....
View 1 Replies
View Related
Jul 10, 2009
I need a VBA code to remove multiple macro buttons from 31 multiple excel sheets with a single click.
View 9 Replies
View Related
Jan 7, 2010
Can hyperlinks be converted to buttons
I've a large number of links so a global conversion is what I'm hoping for.
P.S. I'm running Excel 2010
View 9 Replies
View Related
Sep 3, 2009
I would like for the If statment to hide multiple labels and buttons. How can I add more than one condition after Else:?
View 3 Replies
View Related
May 10, 2009
I've searched through the forums for this information, and I have found a couple of similar issues that have been solved, but copy+pasting the code into my form has not had favorable results.
Basically, here is what I am after:
I have a sheet that already has 4 buttons active, with a handful of other subs that they are calling. I am wanting to be able to add new buttons and have them call a universal macro that will forward them to my existing subs. However, I'm wanting a variable to be set based on the Caption of the button that was clicked. For example:
View 14 Replies
View Related
Mar 6, 2008
I'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.
View 5 Replies
View Related
Jun 6, 2014
I tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
I am not the most advanced VBA user
View 6 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
May 13, 2006
I have in sheets(1), a CommandButton. attached from the "forms toolbar". msgbox Sheets(1).Buttons("CommandButton1").Caption. shows me the caption of this commandbutton. I am using this commandbutton so often so... I would like to refer to this button say:
Dim CM As control
cm=Sheets(1).Buttons("CommandButton1")
msgbox cm.caption
* * *
But i am not able to know the declaration I have to use, I mean
Dim CM As shape??
Dim CM As As CommandBar??
View 3 Replies
View Related
Aug 23, 2013
My problem is I cannot copy from a Form Control drop down box, and I need to do this for ~10 drop down boxes in about 200 xls files. The files follow a template so the drop down button Inputs are uniform. Here is some more detail:
I’m building an Access Database so that our data (currently in many, many Excel Spreadsheets) can be efficiently queried. The old system was that when asset data was collected, the data would be entered into an Excel spreadsheet, using a Template. So for example:
Project A1234
Name
Main Street Pipe
High Street Pipe
Ref No.
12345
12346
Installation date
22/08/13
19/07/12
X Coordinate
55667
99212
Y Coordinate
77889
12364
We have hundreds of these files, but I managed to get all the files in one folder and Paste and Transpose the data from the relevant Cell Ranges in each file (using a VB sub) into ONE summary sheet. Success; or so I thought.
Unfortunately for one generation of the template (people changed them slightly every year), the template had people enter information into Drop Down Menus. Not a problem when they’re associated with a cell, but these were free floating Form Controls.. so you can’t actually click and copy from them, or call them in VB as you would a specific cell.. afaik.
So my issue is how can I extract the data from those Form Buttons? I’ll try and provide as much info as I can:
Firstly I tried to find some sort of identifier for each Form Button. The dropdowns are called Combo Boxes, (Developer tab > Insert > Combo Box (Form Control) ), and when you select them (by right clicking) and hit the View Code button in Developer Tab > Controls the following shows up in VB.
Sub DropDown44_Change()
End Sub
I’m guessing that the number is related to the button so that’s one useful thing, an identifier of sorts. There’s no actual code there though really from what I can see.. My problem is I have no idea how to extract from DropDown44!
The range of values in the drop down comes from a separate sheet where there’s just a list of the values. There aren’t any cells linked to the drop downs though. If I enter a cell in (Right Click) Format Control > Cell link: then it prints the number (e.g. 4) of the value in the range. So if the drop down options are “Monday”, “Tuesday”, “Wednesday”, “Thursday” and “Thursday” is selected, the linked cell says: “4”.
They didn’t link a cell, then I could call that cell in a VB sub and the job would be done. Unfortunately they didn’t, so I tried Recording a Macro and selecting the drop down form control.. That didn’t really work, except if I right clicked it, I got some more info from the macro VB:
ActiveSheet.Shapes.Range(Array("Drop Down 19")).Select
So is my drop down an Array? My understanding of an Array is that it’s a list of arguments.. all I get there is the name of the button. I am not experienced in VB so this is as far as I’ve got. Perhaps I can get a sub to select the button using the above line, but I need the info from it, i.e. which value is currently selected in the Drop Down.
(Using Excel 2010 but the .xls files are from ~2005)
View 1 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Aug 9, 2007
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
View 9 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
Feb 19, 2012
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
View 5 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
Sep 6, 2013
I have several option groups (Y & N in each) linked to cells to display TRUE / FALSE depending on which option is selected in each group. I have another cell which I want to apply conditional formatting to if EITHER Y or N is selected in all groups. At present I use COUNTIF to check for FALSE=0 in the linked cells which works if all the answers are Y. How do I apply CF if there is a mixture of Y & N (TRUE / FALSE) in all groups (I'm not sure if I've explained that well or not).
Excel 2013
View 1 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Oct 8, 2007
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
View 11 Replies
View Related
Apr 21, 2013
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
View 4 Replies
View Related
