Numerous Number Comparisons
Nov 19, 2009
I am having a little difficulty getting my vba to correspond to what i want it to do. I have columns that can vary with how many rows they have weekly. The all start at P2, R2, V2.
These columns always have the same number of rows as each other, but the number of rows varies.
I compare my R2>P2, and if it is return the number in R2. If not, i am looking to take P2 and round down to the nearest .95. (ex: R2 is at 3.45. The value that should be put in in V2 is 2.95. Since the values all change as well, it needs to compare: .96-1.95, 1.96-2.95, etc. all the way up to 15,000.
I know it can be done with if's, whiles, or from i to x, but my experience is in vb.net, not vba. And, since i am new at this, i can write the code, but don't know how to make it correspond to a new excel filename weekly.
View 13 Replies
ADVERTISEMENT
Jan 23, 2010
Sample data:
1234
234
123
0304
304
7685
0123
0076
687
I need to be able to use formulas on the above numbers to perform look-ups and comparisons(=IF(A1>1000,"Yay","Boo")). My issue is the leading 0. To use formulas the above fields HAVE to be in a number format. Converting to typical number format removes the leading 0. All of the help files I can find show how to preserve the leading 0 either require a set number of 0s or require a set length. Unfortunately my data cannot match those rules. Is there any way I can convert these cells to a number format AND preserve any existing leading 0(s)?
View 4 Replies
View Related
Jun 25, 2008
I have monthly revenue information going across columns identified by an account number on sheet 2. On sheet 1, I have an order date alongside the account number. I need a formula that will return total revenues (on sheet 2) for all that occured before the order date, and all that occured after the order date.
I have attached an example here...the two yellow boxes are where I am looking to place the formulas on sheet 1.
View 5 Replies
View Related
Aug 4, 2009
I have a sample of aproxomatly 30,000 records, and I am working to do some data analysis on it.
I am comparing multiple fields using sumproduct(), but if I go above two criteria, the calculation time becomes incredibly long. Is there a faster way to preform these large comparisons, or am I stuck watching my Excel lag out for 5 min every time I recalculate the sheet?
View 5 Replies
View Related
Jul 19, 2007
With the following procedure, I am using a Part ID number to look up that part's location in a worksheet. To do this, I am using the DGET function which now works, thanks to all who helped with those issues.
But now I'm trying to harness the outcomes from that function.
--It displays #VALUE! if the part ID number was not found in my worksheet and therefore the function can't return a location.
--It displays # NUM! if the part ID number was found in multiple records/rows in my worksheet and so it has multiple corresponding locations.
I am trying to construct an IF section that will clarify what these mean to anyone running this macro. I want to replace #VALUE! with "Not Found" and #NUM! with "Numerous".
The issue arises when I compare the result of the function with the #VALUE! or #NUM! strings. I've tried StrComp and a simple equals sign (as below) I've even tried having Option Compare at the top, though I'm not familiar with how that would change things. But I am getting "Type Mismatch Error 13" all the time. I also get that error when set my DGET function = to a variable (Dim'ed as string)
Variables to point out:
---Sheeti is a Publically defined Worksheet
---'CriteriaRange : Publically defined Range that is empty (until assigned criteria for my DGET function later within my loop)
---'InventoryRange : Pubically defined Range that contains inventory data that I look through with my DGET function (Items in the inventory are identifyable by a string I call "sItem" and each has a location in a corresponding column that I am looking for with my DGET function)
Public Sub LoopThruParts()
Dim y As Integer
Dim sItem As String
Dim ValueError As String
Dim NumError As String
View 9 Replies
View Related
Jan 17, 2007
Looking for any assistance: Excel 2000 (9.0.6923 SP-3) Windows XP Pro SP-2
I am trying to get Excel to sort through data in various cells,(text and numerical) and do comparisons with a positive/negative or yes/no error displayed at the end of each row.Suggestions so far range from don't know to use Arrays, I am swamped in MSN help pages and am completely lost now. here goes:
In the example below I want Excel to compare Column P4 against Column M4 and display a result as above, so for instance British Midland (M4) will always be 40100350(P4) & Heathrow Express will always be 40100355, British Rail (Tickets) will always be 40100355,so I want Excel to compare all Suppliers against their corresponding codes for each row Eg (P4 to compare to M4) and display if this is correct or not, the codes 40100350,355 etc do not change ....
View 9 Replies
View Related
Dec 25, 2009
I am trying to create a spreadsheet that will take all my grades from the semester (I'm a college student) and compute my GPA. I managed to get a weighted average for each class, but the grade is on a scale of 1-100. I need to convert that to a letter grade, and then a 4.0 scale. How can I set it up so that it will return "A" if 90<Grade<100, "B" if 80<Grade<90, etc.? I'm apologize if this is something simple, but I've been trying to find the right function for a long time.
View 5 Replies
View Related
Feb 19, 2014
I work for a construction company, Someone else created a workbook a few years ago with 140 similar pages, each listing a separate piece of equipment as a service record. I need to print these out randomly for mechanics to update with new information, as they service the machines. However, some of the pages of the original workbook are goofy and the workbook as a whole could be improved. But, oh that many pages!
I have worked on a new template page for entering information to make the worksheets all cohesive and updated. Is there an EASY and/or FAST way for me to copy this page 150x to make a new workbook, and just enter my data onto each new page? I really don't want to reformat each page of the original workbook individually to see if I can fix all the glitches and weirdnesses that have occurred on the pages over the years. I thought it would be much easier to retype the data onto new pages.
View 6 Replies
View Related
Oct 4, 2013
My workbook is a variation of the below repeated on a number of sheets.
Sheet 1
A
B
C
1
Name
Carrots
Peas
2
John Smith
0
7
3
John Doe
2
1
4
Joe Bloggs
4
0
On a separate summary sheet Im struggling to create a formula that would look through all sheets and Sum where 'John Smith' appears and then sum the number of 'Carrots' (if any) and 'Peas' and then the same for any other names that has values attached to it. The names in each sheet may not be in the same order or appear at all otherwise I would just use a standard sum on each sheet.
View 2 Replies
View Related
May 6, 2014
I have 153 rows of data to name, with a different offset formula per row.
View 8 Replies
View Related
Jan 24, 2014
At the moment I have a macro that is assigned to a button. When clicked, it creates a newline, create and copy a column in another sheet. This code works fine :
[Code] ......
What I now want to do is make a cell called "Total Number of Sites" and allow user to input data into "D3" manualy. eg if 3 sites, user input 3 in D3 so D3 = 3.
Since total number of sites = 3, Instead of clicking that button I made 3 times, I want to call the macro 3 times using a nother button.
However it doesn't work. This is what I used:
[Code] ..........
View 5 Replies
View Related
Aug 8, 2008
Let's see who's got the logic.
What I have:
Column C containing either 1 or 0.5 or ""
Column E starting at E9 which may contain "deal" or a few other things
Column I starting at I9 which may contain "here", "away", or "no"
Cell J4 which will contain a number........
View 9 Replies
View Related
Jun 19, 2007
I am currently trying to organize numerous numbers by fractions, and it just will not set up right.
1 1/2
1/2
3/4
2
1
2 X 3/4
1 X 1/2
1 1/2 X 3/4
What would be the best code used, or method, to ensure that these numbers organize correctly?
View 2 Replies
View Related
Dec 7, 2007
I have a VERY complex custom data validation formula that is getting crazy. I thought it might be easier to use a user defined VBA function to handle it, but was unsuccessful.
I was able to write a VBA User Defined Function & use it within my spreadsheet to derive the value of another cell, as follows: =IF(OR(ISBLANK(B12),myValidation(B12)),"OK","NG")
I tried using it as a Custom Data Validation on the cell itself (=myValidation(B12)), and I get an error: "a named range you specified cannot be found".
Can the function be used in this way or could someone suggest another way of handling this?
View 6 Replies
View Related
Nov 2, 2011
Is it possible to perform conditional formatting on numerous worksheets at one time. I have about 50 worksheets that I would like to perform the same conditional format on. Is there a way to do this.
View 5 Replies
View Related
Apr 3, 2008
I believe in the past that I have told Excel to send the output of the pivot table to different worksheets. For example if I have three regions- the pivot table would send the output to three worksheets and name the worksheets with the three regions.
View 5 Replies
View Related
Oct 25, 2012
I am trying to produce numerous workbooks based on a filtered name. I will attach a sample spreadsheet that has the data.
On the sheet we have engineer names. I basically want to filter them (not difficult with a macro) but then to copy the results to a new spreadsheet and save the workbook as the engineers name (ie J. Bloggs has 5 jobs so they are filtered and the results are dumped into a new workbook and then saved as J. Bloggs.xls). This will happen for all engineers.
I have though about doing it as a macro and I think that would give me the end result but we have around 20 engineers and these can sometimes go up and down. Is there anyway to do this automatically?
Test Cost report 1.xls
View 6 Replies
View Related
Mar 13, 2014
In A1 I have a list. The list Manager, Assistant Manager, Casual In B1 I have a list of places America, UK, Mexico there are amounts in A3 A4 A5 and B3 B4 B5 If Manager is selected then America I would like A3 to display in C1 Depending on which variations are picked I would like the amounts to display in C1
I know how this formula which I've used before but I don't know how to include all the variations.
=IF(ISERROR(FIND("Manager",A1)),"",A3)
View 3 Replies
View Related
Oct 12, 2004
I am trying to send 7 different emails in this sub, the sendnotes sub is not recognizing my GOLOOP value
As you can see I stole this code from this site. You all are terrific!
Sub SendFiles()
Sheets("Menu").Select
Range("C23").Select
Filename = ActiveCell.Value
GoLoop = "1"
SendNotesMail
GoLoop = "2"
SendNotesMail
GoLoop = "3"
SendNotesMail
GoLoop = "4"
SendNotesMail...................
View 9 Replies
View Related
Feb 23, 2010
I have a report that the name and address was put into one cell. I need to put this into numerous columns so I can do a mail merge.
View 9 Replies
View Related
May 25, 2009
Let`s assume that I have numerous "Serial Number" in "Sheet1" : http://i40.tinypic.com/2iqbspt.jpg
Now I want to create some cards in "Sheet2" that each card have a serial number that related serial number there is in "Sheet1" : http://i43.tinypic.com/34fz690.jpg. Need easy solution for doing it while when I drag one card to copying it then related serial number in sheet1 would be appear in required field. I mean first card has first serial number of sheet1 and second card has second serial number of sheet 1 ; but I want to doing it quickly with dragging.
View 4 Replies
View Related
Jan 7, 2013
a
b
c
d
1
monday
tuesday
wednesday
thurs
2
ted
bill
frank
mary
[Code] .......
We use excel for scheduling purposes and each and every day we fill out a floor chart with who is working that day. As it stands now we have to print out a template and hand write all names or type them in and print it out. What I would like to try and do is define each set of names and allow for easy access to auto fill these names. I feel it needs to be a simple process as not all of our managers experienced in excel or formulas. What I would like to try an accomplish is in sheet 1 cell A1 to be able to create a drop list or formula that that would let me return all the names for a given day.
For the purposes of this discussion we can just define each list as the day that is the header ( IE A2:A4 on sheet 2 would be defined as "monday". Also, I already have the names autofilled based off of what the our schedule has. I'm curious if I could create a drop down list with each day of the week as an option, and if they select Tuesday it will then return all the names defined as Tuesday in a column below.And the next day be able to return Wednesday names and so on.
I'm not stuck on it being a drop down list. Maybe if they could just type and =(defined name) in the box above and it would return all the names.
I have tried an =(defined name) and it does return the value but only for the first cell and it has to be in the same row for it to return the name. Which doesn't work because I would like the names that are being defined on a separate sheet.
View 1 Replies
View Related
Nov 24, 2009
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
View 9 Replies
View Related
Aug 19, 2008
I have a workbook with numerous worksheets that contain text, steps actually. I would like to select all common words and change their formatting to bold. Every time I try however, it formats the entire cell in bold. Is there a way to isolate just the word "click" for instance in all the cells in each worksheet and change the formatting to bold, and leave the other text within the cell normal?
View 9 Replies
View Related
Dec 16, 2008
I have this set of number..
987654.
What im trying to do is this..I read this number and check for the first number with the 2nd number. If its greater then i will swap it. Im trying to do this so that my number can be rearranged as 456789.
View 8 Replies
View Related
Mar 14, 2014
I need a formula that will calucalte the monthly total based on the following conditions:
Col A = Yearly Cost
Col B = The number of the month when the costs are starting (1=Jan etc)
Col C = The duration or the number of months for which the costs are to spread
Col D is Year 2013 with the months across columns D-O. Row 1 above those columns shows the month's corresponding number.
Right now I have =IF($B3<=D$1,$A3/$C3,0) however if my start month is 1 and my duration is 5, I need the costs to stop after May. I've attached a sample file. Calculate based on start month and duration.xlsx
View 3 Replies
View Related
Jul 31, 2014
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
View 1 Replies
View Related
Oct 23, 2011
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
View 4 Replies
View Related
Jan 22, 2013
Excel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1
View 7 Replies
View Related
Aug 20, 2013
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
View 9 Replies
View Related
