Can't Consolidate Data To External Worksheet
Jan 31, 2013
Every month I have to do a report that takes information from four other excel spreadsheets. The spreadsheets are all the same format and contain information on community events. I have to run a report that shows what events are happening in the following month. Currently I copy and past from all the relevant data from each spreadsheet into one. Is there and easy way of making all this information to come together every month.
View 4 Replies
ADVERTISEMENT
Nov 7, 2006
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol()
Dim Sht1 As Worksheet
Dim Sht2 As Worksheet
Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
2) automate it by using worksheet change?
View 9 Replies
View Related
Apr 3, 2007
I have attached a compressed excel file containing 1,2 and final worksheets. How do i consolidate all the data in their respective B columns of 1 & 2 to the B column of "final". In reality i actually have more than 5 worksheets to be combined to a single final column B.
View 9 Replies
View Related
Oct 8, 2008
I have two worksheets and need to consolidate the relevant data into one worksheet.
On both worksheets there is one column that I can relate to the other worksheet, called "TKR", which contains a code in each field, such as "000210 K", or "004170KS". Both worksheets have this column. In the first worksheet, called POS, each "TKR" code tells me that this is a relevant "TKR" code in the DB worksheet. I am not interested in the data in POS, just the code to tell me which records are relevant in DB.
In DB is the information I need to extract. But in this worksheet, there are many irrelevant records, which I need to ignore. I need to reference the data in the TKR column in the POS worksheet with the data in the TKR column of the DB worksheet, then extract the record from the DB worksheet and place it in a new worksheet, along with each other extracted record, compiling a consolodated list. I could do this by cut and paste, but I have 30 different databases, both POS and DB, each containing up to 6000 records.
In the POS worksheet there is more than one record for each "TKR" code. I can run an Advanced Filter to extract a consolidated list of "TKR" codes. I am stumped however on how to then use that list to reference the same codes in the DB worksheet and extract the records to a new sheet.
View 5 Replies
View Related
Jan 27, 2014
how to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
View 3 Replies
View Related
Feb 9, 2010
I have a 208-tab workbook (4 employees with 52 submitted weekly timesheets). I need to consolidate and pivot job costs based on these submitted timesheets. There are two kinds of jobs: a list of products, from which the employee chooses through a drop-down list. There are also "Tracking Job ID" codes that are numbers between 7000 and an unknown ending number, which the employee types into the sheet. In both cases, the % of work performed is multiplied by the employees hourly rate and creates a total.
I need a pivot table that collects these totals from all the sheets.
I tried to use a VBA template from contextures.com just with a few examples from my workbook, but I don't know how to use VBA, so I failed. The only thing I did was substitute their example sheets with a few sheets from my workbook and re-wrote that part of the array formula.
see attached workbooks.
View 11 Replies
View Related
Sep 11, 2009
I'd be very grateful if s.o. help me find solution for the following task:
I want to fill certain worksheet with data from external .tsv files. The .tsv files are with a almost a common name (something_date.tsv), located in folders for each month.
What I'm usually doing and want to automate:
- I'm opening the first .tsv file from the monthly folder;
- Creating AutoFilter on the first row;
- Selecting a custom criteria from the AutoFilter;
- Copying the cells matching this AutoFilter criteria;
- Pasting in a predefined worksheet (with AutoFilter on first row);
*All of the copied cells are not being altered in the predefined worksheet, i.e. the first rows of the .tsv file and the worksheet are the same.
- Doing exactly the same with the next file in the monthly folder (but pasting below the already copied cells in the workbook).
- Etc.;
- Etc.;
View 14 Replies
View Related
Oct 17, 2008
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
View 2 Replies
View Related
Jul 23, 2006
I'm using a workbook containing a worksheet for each month of the year. I want to consolidate all the data from the different worksheets into one worksheet to enable data manipulation by means of a pivot table. Updates in the individual worksheets must be automatically updated in the consolidated worksheet.
View 4 Replies
View Related
Jan 8, 2014
I have a database which shows members details with a colour system for varying levels of payment. I want to copy the membership number title and name from this d/base to another worksheet in the same w/book so I can print it in a4 size and select the page breaks. I think this is achieved by some thing called "concactia"??
View 1 Replies
View Related
May 20, 2014
I am attempting to consolidate multiple worksheets into one. The consolidation works fine on worksheets that have data however, as in my example file, there are worksheets which are presently blank (empty of data) - save for the header row.
The problem:
On consolidation, the header row from the "Empty" worksheet becomes a row in the "master" worksheet that is created. How can a worksheet without data be ignored on consolidation?
View 2 Replies
View Related
Mar 6, 2014
I have about 50 tabs one for each city and i need to update information everyday for each of those cities. I now what the macro to update all the new entries in each of the worksheets into a consolidated Summary sheet. This is dynamic so if 10 rows are filled in the summary tab and if i update the rows in the individual city worksheets the summary tab should paste values from the 11th row and so on
View 14 Replies
View Related
Sep 23, 2006
I need the correct syntax to consolidate ranges from several worksheets into a summary worksheet - all in the same workbook. I am building the Array on the fly, and I keep getting errors. (Subscript out of range being the most recent).
The code now is opening only one workbook so I can keep it simple. It iterates through the sheets collection, and builds the array.
Private Sub cbConsolidateToRollups_Click()
Dim MyArray() As Variant
Dim Source As Variant
Dim SheetNames As Variant
Dim SingleQuote, DoubleQuote
SingleQuote = Chr(39)
DoubleQuote = Chr(34)
'set the directory to Rollups
ToPath = Application.DefaultFilePath & "Cost Tracking" & "Rollups"
ChDir ToPath ....................
View 9 Replies
View Related
Aug 20, 2008
I want to be able to import an external worksheet (say sheet1) to some data structure such as a 2d array or a dictionary. I don't want to store imported data temporarily in a local worksheet - I want to import external worksheet straight to array!
I have code that can import to a given worksheet name ... but I don't know how I can modify it such that it dumps it to an array or a dictionary.
The code I have is:
Sub read_in_workbook(sheet_name As String, source_dir As String, file_name As String, Optional append_from_y As Integer)
Dim rst As ADODB.Recordset
Set rst = New ADODB.Recordset
Dim stCon As String, stSQL As String
Dim fsoObj As Scripting.FileSystemObject
Dim fsoFolder As Scripting.Folder
Set fsoObj = New Scripting.FileSystemObject
Set fsoFolder = fsoObj.GetFolder(source_dir)
If append_from_y = 0 Then append_from_y = 1
stCon = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=" & fsoFolder & "" & file_name & ";" & _
"Extended Properties='Excel 8.0;HDR=No'"
stSQL = "SELECT * From [Sheet1$]"
rst.Open stSQL, stCon, adOpenForwardOnly, adLockReadOnly, adCmdText
Worksheets(sheet_name).Cells(append_from_y, 1).CopyFromRecordset rst
'###Instead of it dumping to a given sheet name, can I turn this routine to a function
'###and have it return a populated array or dictionary object?
End Sub
View 9 Replies
View Related
Aug 3, 2006
I have an excel workbook we use for quoting jobs. All our pricing references are in another workbook on our network. I have reference in the 'quoting' workbook that refer to the 'pricing' workbook.
The trouble is, when some users open the 'quoting' workbook, and have another Excel file open, some references to the 'pricing' workbook change to the other file they have open.
I suppose there is some sort of replicable condition that is happening, but I can't figure out what is going on or why.
So my question is: Can I ' lock' an in-cell reference to an external workbook so that it NEVER changes?
I tried hand entering the reference (network location+workbookname+sheetname) into a cell and then referencing that cell, but I couldn't get that to work.
View 9 Replies
View Related
Apr 17, 2007
I am trying to use a conditional sum formula where the data resides in and external workbook. This is fine until I close the external workbook and the formula no longer shows the external reference. Is there a way of getting excel to use conditional sums in this way (or what is the best way of achieving this?)
View 4 Replies
View Related
Dec 8, 2013
I'm looking for a way of keeping case sensitive data in a range of cells, before using Data Consolidate, which when merged afterwards, Consolidate removes the case sensitivity and combines the quantities into one.
Check out this simple table as an example >
A
B
C
D
E
F
G
H
1
TEXT
QTY
TEXT
QTY
TEXT
QTY
TEXT
QTY
2
and
3
and
2
and
10
and
5
[Code] .........
Cells A1-B7 and C1-D7 are two sets of original data, before consolidation.
Cells E1-F4 are the result of applying a Data Consolidate operation to the A1-B7 and C1-D7 ranges - note how the merged result ignores the case sensitive condition in the original ranges.
Cells G1-H7 is the post-consolidation result that I'm looking for, where the original text case is maintained.
View 3 Replies
View Related
Feb 15, 2013
Upon opening after "Enable" is selected the workbook attempts to locate several nonexistent pieces of data, either internet based files or network based files. Requested data appears to be about 11 years old and would not be applicable it located.
Edit Links shows the location of the requested files, i.e., E:filename but does not show the location within the document that causes this request. A search for "E:" does not locate text in any worksheets.
The question is how to delete or turn off this problem which slows opening, saving, and recalculation of a large multiple worksheet workbook.
View 1 Replies
View Related
Apr 25, 2013
I have a list of entries, people log how many products they sell a day, at the end of the I need to consolidate that data, to get a sum of how many goods each person sold that week. So on on tab I will have multiple enetries by the same person and on the consolidtaed tab, I want each person's name and Id # to show up on one row, but them I would like a total of how much goods they have sold for that month. I have attached a copy of my file, the consolidated tab shows what I would like to get in the end.
View 2 Replies
View Related
Dec 8, 2008
This should be easy but after searching "consolidate" all that I could find was multiple sheets and complex questions.
I have 5 data columns that I need consolidated into 1 single column. I've tried the consolidate funtion but it appears to only work with formulas and numerical values (unless I cant find the proper command.) I've also tried paste special but it populates the cells following.
I need 5 cells word values pasted into a single cell
View 12 Replies
View Related
Mar 19, 2013
I need to pull a data from 3 different SharePoint lists and present it in a new data sheet. So far I know how to create data connections and I am able to see everything in 3 different worksheets but in the same workbook. Also if we have the same Project and IT number we should pull information just from the SharePoint 1 list.
View 1 Replies
View Related
Jan 25, 2012
I have been trying to find a way to consolidate data in two tables, but can't seem to locate a good response. I have been toying with EXACT, VLOOKUP, HLOOKUP, MATCH, and SUMPRODUCT, but none seem to work for my issue.
Two Files - Call them acrendo.xlsx and office.xlsx
Both have a single sheet and contain first name, last name, and date columns. Office also has other information that I'm trying to merge into the corresponding row of acrendo.
Basically, I am trying to take the combined first name, last name, and date column from a row in acrendo as a single record, look for an exact match in office, and if it finds one, return the corresponding values in Coumns D, E, F back to acrendo. Someone suggested using the following sumproduct formula:
=SUMPRODUCT(--(A2=[ofc.ally.xlsx]ofc.ally!$A$2:$A$9329),--(B2=[ofc.ally.xlsx]ofc.ally!$B$2:$B$9329),--(C2=[ofc.ally.xlsx]ofc.ally!$C$2:$C$9329),E:E)
This always returns a value of 0, even if there is data in the matching row to be copied over.
One small complicating matter is that there may be duplicate entries in office (i.e. one row in acrendo may match to four rows in office). I can cleanse that if necessary, or preferably, if multiple matches are found, it would simply insert the additional rows into the acrendo file.
Also, is there a way to go through the acrendo file and check for duplicate records and delete them (e.g. if there is the same last name, first name, and date, delete the duplicates).
Can't do this manually as I have acrendo has almost 18,000 rows and office has almost 10,000 rows.
View 1 Replies
View Related
Sep 11, 2012
I am trying to consolidate multiple data sets in one worksheet into one list. An example of the data sets is below:
Product1
Company1
Product1
Company2
Product1
Company3
Product2
Product2
Product2
Product3
There are over 50 data sets in the worksheet with exactly the same number of columns. However, when the data is updated, the number of rows for each data set can change.
The output table is below:
Product1
Company1
Product2
Product1
Company2
Product2
Product3
Product1
Company3
Product2
I am assuming it is a loop function in vba to loop through all of the data sets in the worksheet, but I have limited experience with vba to know for sure.
View 4 Replies
View Related
Oct 5, 2006
I have attached a sample workbook to show my layout.
I need to link multiple sheets (but not all, just certain ones) to one "master sheet". More specifically I need to link only certain colums from each certain sheet. The sub sheets have detailed information, but I only want basic information on the master sheet like FirstName, LastName, Ext, Buyer#, etc Not every column from the certain sheets is needed.
I need a way to update this master sheet when I update the sub sheets manually. So if I add a employee record to a sub sheet, the master sheet is updated. These updates aren't often, so running a macro to rebuild the master sheet after I manually delete it wouldn't be out of the question, whatever is convienent.
In the attached worksheet, I believe there is a sheet called Items. I don't need any information from that sheet at all to be on the master sheet so it can't be in the array when the master sheet it built from the sub sheets.
View 6 Replies
View Related
Mar 23, 2007
I would like code to consolidate weekly hours worked, on each project, for each person. I therefore wish to end up with 1 row per person, per date, showing their GRAND Total Hours worked in column P (across all projects, and across all tasks). So, in the example below, everybody's rows would stay as is, apart from Mike Jones's, which I would like to be consolidated into one row, showing a GRAND Total Hours worked of 16.
View 3 Replies
View Related
Sep 7, 2007
I need a macro code to combine data from 2 different workbooks to a new workbook.
See attachments for ease of understanding.
Note:
- Data in sheet1 of both book1 and book2 should be pasted in a new book (eg: book3)
- The result I am looking for is like sheet2 of book1 (colour differentiation done for ease of understanding and not required to be implemented in the code). Also since I could attach only 2 books, I have pasted the desired result in sheet2 of book1.
- Also note that headings of book1, book2 and the resultant book3 will be same.
- Both book1 and book2 are stored in the same folder (im not sure if this info helps)
- It is important to note that data keeps changing and new rows will be added in either book1 or book2. So when I refresh the resultant book3, it should add these rows that were previously missing.
- First it should paste all data from book1 (old and new rows), then it should paste all data from book2 (old and new rows).
- I think the sheet2 of book1 will help you to understand what I mean by the above note.
The above exercise is for me to get a logic. In the actual scenario, there are more than 2 books to pull the data from. And also there are more than 20 columns to pick data from.
View 4 Replies
View Related
Jan 7, 2009
I have a workbook with 7 different worksheets (site_worksheets) containing data about various sites. I need to copy all this data into a single worksheet (worksheet_a). I want worksheet_a to update itself when another row of data is added to any of the site_worksheets.
View 12 Replies
View Related
Jun 20, 2014
I have a large data (more than 50k rows) in a spreadsheet and i want to consolidate the information's.
here is the sample source data.
Source Data
codeamt1amt2amt3
123456$16.00 $0.00 $0.00
789011$0.00 $18.00 $0.00
123456$12.00 $5.00 $0.00
123456$0.00 $0.00 $7.00
111111$11.00 $1.00 $3.00
789011$22.00 $0.00 $0.00
and the output should be.
Output
codeamt1amt2amt3
123456$28.00 $5.00 $7.00
789011$22.00 $18.00 $0.00
111111$11.00 $1.00 $3.00
currently i'm using the consolidate function of excel inside my vba (which is working fine) but i took forever before it finished, i'm just wondering if there is an alternative way which is more faster.
View 8 Replies
View Related
Jan 29, 2014
I have 2 pivot table in 2 different sheet and i want to consolidate the data in one sheet.
Pivot table:1(order processed) as below
date
MR X
MR Y
MR Z
MR S
[Code].....
I need the data as below in separate summary sheet. 2 column in each employee(1 is processed and completed), i dont have option here to create 2columns here hence i put "/" in between.
date
MR X
processed/Completed
MR Y
Processed/completed
[Code].....
View 2 Replies
View Related
Jan 29, 2008
Here is a sample Excel sheet I have: http://spreadsheets.google.com/pub?k...dnD01VPV8RzOAw
I have over 1,200 rows with duplicate data(sometims 3-4 times) that is filled in some columns and empty in others.
I would like to consolidate the data and then delete the duplicates without loosing any data.
Is there a way to do this? I have Office 2007. I can't just use the Duplicate finder cause that just deletes everything right away.
View 9 Replies
View Related
