To Extract Data From HTML Header
May 19, 2009
I have managed to open an HTML file from IE and start importing some data from the HTML source to an excel table.
The problem is that I need to get access to some information in a function that is in the HTML header and I do not know the syntax to use.
I am defining the HTML document using ".Document.body.innerHTML". But I need to find the syntax that is equivalent to ".Document.head.innerHTML".
With HTMLdoc
.Visible = True
.Navigate PageString
Do Until .ReadyState = 4: DoEvents: Loop
End With
View 9 Replies
ADVERTISEMENT
Apr 30, 2013
I am trying to extract the data values from the references Bundesbank page and get them into a worksheet so I can manipulate from there. What I have is below.
Code:
Sub Get_Data()
Dim IE As New InternetExplorer
IE.Visible = False
[Code] .........
View 9 Replies
View Related
Jul 22, 2014
I have a few hundred of these divs, that I need sort and filter.
I would like to remove ALL HTML and be only left with the following:
Example Name = KeithEmail = keith@example.comStore = Store 1 (This only has 2 options. Store 1, Store 2)
All of the below code is in an individual single cell, so there are about 400 cells
HTML Code:
<div userid=""286"">
<div id=""694"">
<h1 style=""display:none"">Keith</h1>
[Code]....
View 1 Replies
View Related
Nov 5, 2012
Many lines on my sheet have the following text in col B.
****** http-equiv="Content-Type" content="text/html; charset=UTF-8"> ****** name="generator" content="http://www.movabletype.org/"> Church Marketing Sucks: Evangelism & Outreach Archives
Is there a way to extract all the text or words between the and tags and put the extracted text into col D?
View 1 Replies
View Related
May 20, 2008
I am attempting to extract a particular piece of data from a webpage. I was not able to use a webquery because the data can only be reached by searching an online database and the URL remains static throughout this process.
http://gisims2.co.miami-dade.fl.us/myhome/proptext.asp
The data of interest is contained in a simple, 2-column table with item descriptions in the first column and item values in the second. The code below is my closest attempt. I am attempting to look through the innertext of all the tables on the results page and see if any contain the text "CLUC", which is the description of the data I'm trying to retrieve. The code never finds any qualifying tables.
Sub PropInfo()
Dim appIE As SHDocVw.InternetExplorer
Set appIE = New SHDocVw.InternetExplorer
Dim varTables, varTable
Dim varRows, varRow
Dim varCells, varCell
Dim lngRow As Long, lngColumn As Long
'OPEN INTERNET EXPLORER, GO TO WEBPAGE
appIE.Visible = True
appIE.navigate "http://gisims2.miamidade.gov/MyHome/proptext.asp"
Do While appIE.Busy: DoEvents: Loop
Do While appIE.readyState <> 4: DoEvents: Loop.........................
View 2 Replies
View Related
Dec 6, 2012
I have previously used the following code to successfully pull out IE webpage source code for string manipulation.
Its a crude example to demonstrate the principle:
Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
[Code] ......
However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"
The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......
The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.
Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?
Using :
MS Excel 2010
IE Explorer 8.0
View 1 Replies
View Related
Sep 29, 2009
I'm using excel 2003 and was wondering if I could insert html around the cell data in a faster way than cutting and pasting it. Here is an example of a column and what I would like to do.
aaaa
bbbb
cccc
dddd
Now I would like every cell to have HTML around it to be easily posted on a website. I would like the cells to now look like this.
<a href="www.url.com/aaaa"><img src="www.url.com/aaaa.jpg"></a>
<a href="www.url.com/bbbb"><img src="www.url.com/bbbb.jpg"></a>
<a href="www.url.com/cccc"><img src="www.url.com/cccc.jpg"></a>
<a href="www.url.com/dddd"><img src="www.url.com/dddd.jpg"></a>
I haven't dealt much with functions so I don't even know if this is possible.
View 3 Replies
View Related
Feb 15, 2012
I'm working on creating a custom HTML report with javascript that I will be using to import in to excel to populate some graphs. Basically everything is working, except if I use javascript to show me a value.
When I use Import Data from Web via excel, everything gets imported except for the javascript part of the html doc.
An example of the html file (stripped down to nothing but 3 peices of data): [URL]
View 6 Replies
View Related
Feb 7, 2013
Goal: I have data that was copied to my clipboard from the webpage source in a Chrome browser. I would like to get that data over to my excel worksheet and insert it starting at "A1".
Issue: All of the pasted data is ending up in ONLY cell "A1" when using VBA.
When I just click in cell "A1" and CTRL-V, the data gets spread across a lot of cells, which is what I am after.
Code:
'------------------------------------------
'Start The Process
'------------------------------------------
' Assigning clipboard data to string variable strClip
Dim MyData As DataObject
Dim strClip As String
Set MyData = New DataObject
MyData.GetFromClipboard
[Code] .....
View 4 Replies
View Related
May 2, 2006
I have a cell in which I have the following data (for example):
<a href="http://www.trucks.com">Ford Trucks</a>
I need to export the sheet as a tab delimited txt file for import into another program. When excel saves the file as .txt, it add extra data so that the cell is represented as:
"<a href=""http://www.trucks.com"">Ford Trucks</a>"
Note the set of two additional inverted commas. This extra data interferes with the parsing of the data in the other program. I've tried formatting the cells to "general" and "text", however, it does not seem to affect the txt output.
View 9 Replies
View Related
Nov 14, 2006
I'm trying to take the contents of an excel speadsheet and write it to an html file with my own formatting. For example I would like the row:
|32|55|28|
to end up in the html file as:
<tr>
<td class="align-right">32</td>
<td>55</td>
<td class="">28</td>
</tr>
In theory it seemed fairly simple to loop through a sheet and write before and after each cell, but once I tried writing the code I realized I was in way over my head.
View 9 Replies
View Related
Jun 23, 2008
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies
View Related
Jul 4, 2014
I added an attachment with an example. You will see a matrix, with in the most left column an ID, then the headers of the matrix has different numbers that mean something.
What I want to do is, you fill in a number in the combobox, then press on a button and a report will be made on a new worksheet. With a list of the numbers and dates in the matrix that the ID has. Like shown in the example sheet in the workbook.
View 1 Replies
View Related
Aug 3, 2014
I have attached the excel sheet here for reference.
I would like to sum up the values across rows, so long as they have the terms "FQ1", "FQ2", "FQ3" or "FQ4" in the first row.
In other words, for the row "Total Revenue", I would like to sum up the quarterly values, using VBA, since the number of quarters increase with time.
How should I code up a VBA for that?
View 4 Replies
View Related
Jul 19, 2007
what is the code to sort a spreadsheet in VBA code by HEADER rows?
i have 2 rows i want to sort by: first by Column D row 1, then by column C row 1.
Cells.Select
Range("C1").Activate
Selection.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("C2") _
, Order2:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase:= _
False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, DataOption2 _
:=xlSortNormal
Range("C2").Select
selects all cells, sorts, then de-selects.
View 3 Replies
View Related
Nov 18, 2011
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
View 4 Replies
View Related
Dec 12, 2008
I have a spreadsheet template whose Left and Center Print Headers are set to static values.
I would like to pass a single cell's data to the Right Print Header whenever I print the given spreadsheet.
I would also like the Right Print Header to refresh itself each time I print the sheet so that any possible change in the referenced cell will be accounted for.
View 6 Replies
View Related
Apr 17, 2009
I need a bit of VBA code which will run automatically when a csv file is opened. The code needs to move anything after column F onto the next row and repeat until there is no more data. The data is generated by an external program but is put on the same row (not sure why it does this). I have included an example of the csv file (the data in it is garbage so ignore it) for you to look at. the header row which needs inserting needs to be:
A1=Status
B1=Job No.
C1=Date
D1=Name
E1=Room
F1=Description
Hope this is enough information for you. bear in mind the amount of data being generated could be quite large. it has to be run automatically in order to be used in seamless mail merge.
View 2 Replies
View Related
Nov 15, 2012
On sheet1 I got a lot of columns with data, starting from row 8, which is the header.
On sheet2 I'd like to retrieve the filtered data, based on the value mentioned in cell A1 (on sheet2)
So if for example cell A1 on sheet2 shows "Peter", the code should filter the data on sheet1 with "peter" in the header.
The filtering should be based on cell color (red in this case)
The filtered data should then be copied to sheet2 starting from A3
View 3 Replies
View Related
Apr 30, 2008
I have two header rows on a sheet that I need to sort starting on Row 3, Column A.
The sheet is A-K and rows 1 and 2 are headers
Row 1 has merged cells of A-F which says "Information" and then G-K " Tracking Section"
Row 2 is broken up into individual sub-headers in columns, A-K each one having a bit more info for instance:
Under the "Information" merged header in row 1 there is
A2 Name
B2 Work Center
C2 C/O date
D2 Due CC
E2 Due MX
F2 Date Received
and G-K in row 2 has different sub-headings.
I have tried to use my normal code, which is great for one header, but it ends up sorting the sub-header as I call it...
View 5 Replies
View Related
Oct 7, 2009
In the worksheet "Batting and Pitching Register", I'd like to be able to sort the data in the two charts (APBA Batting Register and APBA Pitching Register) by simply clicking on the cells in the respective header rows.
I've set up ranges (Batting and Pitching), but have had no luck moving beyond that.
View 9 Replies
View Related
Jan 31, 2014
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
View 1 Replies
View Related
May 13, 2014
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
View 1 Replies
View Related
Dec 3, 2012
I'm using Excel 2007. I know how to protect specific cells within a worksheet, but I have not been able to find any information online pertaining to locking or protecting inserted header/footer data, even if I protect the worksheet.
I'm not concerned about setting specific VBA commands to ensure the header/footer prints, but rather preventing other users from being able to edit the data upon distribution of the worksheet.
View 3 Replies
View Related
Dec 24, 2012
Can I create a PivotTable with two columns of data for the same Column header?
I have created a PivotTable in Excel 2003 with months for rows and cities for columns. I would like to have TWO columns of data for each city. The two data columns are: Average House Selling Price, and Number of Houses Sold. When I put both of these data fields into the PivotTable Wizard, they are listed below each other so that each Month occupies two rows, but each city occupies one column. I want the two data fields beside each other so that each month only occupies one row, but there are two data columns for each City.
View 2 Replies
View Related
Apr 20, 2012
I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1
View 2 Replies
View Related
Jul 9, 2014
I have an issue with an export file which is produced in CSV format and needs to be aligned. I have attached a sample of what I refer to.
My Source excel file looks like:
ABC A-101 B - 202
DEF B-203 C - 100
The destination should align with the relevant column headers and place a blank if it doesn't match. Other have queried a similar thing, however my header and data and description is actually in the same cell with a dash separating them.
The output I want is:
A B C D
ABC 101 202
DEF 203 100
There are multiple row of employees with varied column headings as its dependent on what system access the user has. The headings i.e. A,B,C for example is a fixed number of headers.
In my real data set the headers represents a 3 letter system prefix e.g. ZCR,ILP etc
View 1 Replies
View Related
Apr 11, 2014
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
View 3 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Feb 28, 2014
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
View 7 Replies
View Related
