Cell Ranging With Data From Another Cell
Apr 11, 2008
A Workbook containing 3 sheets.
Using the formula Range("A1:D2").Select, can the data "A1" and "D2" inside the formula be substituted with the contents of another cell?
For example:
Using the formula Range("A1:D2").Select to select data from sheet 1, replace "A1" & "D2" from the cell "J4" & "K4" in sheet 2, which has the correct ranges, and then the result pasted in sheet 3.
Sheet 2 has the data ranges required, and they change frequently.
Can an automation be done to range formulas with information from another cell?
View 5 Replies
ADVERTISEMENT
Apr 10, 2009
let's get str8 to the point.
My data sheet comprises of projects in MW. So I have the name of a project and there power in MW.
I would like to fetch all projects that have a similar MW power within a range of + and - 100, and align them one under another.
i.e.:
project 1 = 1000 MW; year=2007
project 2 = 1200 MW; year=2008
project 3 = 900 MW; year=2008
project 4 = 1100 MW;year=2009
project 5 = 800 MW;year=2009
I need a formula that gives me fetches all projects that are =1000 or + and - 100 MW
the result should be the following :
project 1 = 1000 MW; year=2007
project 3 = 900 MW; year=2008
project 4 = 1100 MW;year=2009
I hope I made myself clear...in any case...I'll pass the torch to the Master that can work this dilemna out.
View 9 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related
Jan 6, 2009
The merged Cell B6:G6 will receive a ten-digit number followed by a dash and then one or more numbers. (For example: 1234567890-123)
Cell B15 will then receive data shortly afterwards. I already have a validation macro for this cell which allows either 'I' or 'I I I'.
Upon exiting Cell B15, merged Cell B16:H16 needs a macro which will check Cell B15 and if it contains 'I', Cell B16:H16 will display the data from the ten-digit number entered in Cell B6:G6 minus the first five digits. (For example: 67890-123)
Now the data in Cell B16:H16 can only be somewhat editable hereafter. It can be erased or replaced with numbers in smaller or greater digit combinations than five before the dash (i.e. 67890-123 can be replaced with 123456-7), and digits can be added after the whole group (i.e. 67890-123 & SEE DWG) without any error messages. But if any five-digit number with a dash and some numbers exist in Cell B16:H16, they must correspond with the number in Cell B6:G6 minus the first five digits.
However, if Cell B15 ever receives a 'I I I' afterwards, all data in Cell B16:H16 must be erased. Cell B16:H16 can never contain data if Cell B15 contains 'I I I'.
Also, if the data in Cell B6:G6 changes later on, the corresponding digits in Cell B16:H16 must change as well, even if there are digits after the whole group.
So here is an example of what a good macro would do for me: ...
View 14 Replies
View Related
Oct 14, 2009
I have an Excel workbook which contains data entry fields, which have different types of data validation rules - like Lists, Date, Whole Number.
I do not want end users to remove these data validations as well as the formatting of these cells by doing copy/paste. So, I have implemented techniques mentioned in the following post, and elsewhere - to override the paste functionality and implement PasteSpecial values automatically.
[url]
To keep it simple, I'm only supporting pasting a single cell at a time.
Now my problem is this:
Doing the PasteSpecial values programmatically doesn't prevent the user from pasting values in the cell that violate the data validation rules. So, I can paste a string into a cell having data validation as Whole Number, or a invalid string into a cell having data validation as List.
The following post just suggests disabling paste whenever data validation is present:
[url]
But I would like to allow the paste operation if the value being pasted is a valid value for the cell's data validation.
View 9 Replies
View Related
Jan 12, 2014
I want to do (seemingly easy task) of getting a price from a code, from a code sheet.
EXAMPLE:
Sheet1 (Log sheet)
A1 = "Code456"
A2 = $? <- This needs to be found.
Sheet2 (Price Sheet)
A1=Code123 B1=$1
A2=Code456 B1=$2
A3=Code789 B1=$0.50
Etc, and so on...
What I want to do is basically (without using macros):
"If A1 = sheet2:A1, then
A2 = sheet2:B1, halt. , ELSE,
If A1 = sheet2:A2, then
A2 = sheet2:B2, halt. ELSE,
So on and so forth..."
I thought there might be an easy way to do it with some sort of 'double sided' data validation drop downs or OFFSET function but I cant figure it out.
View 3 Replies
View Related
Jul 15, 2014
I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1
View 5 Replies
View Related
Oct 22, 2012
I have been wracking my brain around how to put this formula together.
Is it possible or it can't do more then 1 cell at a time?
Here is an example:
If F1= button request and E1= Scoring then OK (take no action) also i want to add that Folder in F and Corrupt in E would = OK
If it doesn't match to highlight the cell in red
View 8 Replies
View Related
Jan 30, 2014
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
View 2 Replies
View Related
Apr 24, 2014
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
View 6 Replies
View Related
Jun 20, 2014
I am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.
Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.
So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.
Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.
View 5 Replies
View Related
Feb 19, 2014
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
View 7 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Jul 1, 2013
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
View 5 Replies
View Related
Apr 28, 2014
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
View 5 Replies
View Related
Jul 8, 2014
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
View 4 Replies
View Related
Feb 20, 2010
I'm inputting data in E3 and after I hit enter I want B2 to be
selected. But only for E3 and only in one worksheet. And possibly a
further step... Sometimes the formula in B2 has picked up data from
another place depending on what value was entered in E3. If it's done
this then I won't need to go to B2, I'd want to go to A8 after E3
instead of B2.
View 9 Replies
View Related
Jan 26, 2007
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies
View Related
Jul 7, 2014
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
View 5 Replies
View Related
Aug 4, 2014
cell a1 has yes cell b1 has yes and i want to type yes in c1 that will change a1 and b1 automatically to a blank cell
View 3 Replies
View Related
Dec 30, 2013
I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
View 3 Replies
View Related
Apr 3, 2009
I need my worksheet to automatically fill in a range of cells (from Range B*:G*) with my yellow color once the last cell in the range (G*) receives data, and automatically switch back to no color if the data in Cell G* is erased. However, if somebody merges a range, it should appear as it would by default - as if no macro exists, if that makes sense. I've attached a sample worksheet.
View 2 Replies
View Related
Jan 10, 2008
I am trying to set up a data validation to ensure that when a user enters a number in column A that matches a previously entered number in column A, the user is only allowed to enter the same date for the number it matches in column B.
For example, if:
Row 3 column A = 1320
and
Row 3 column B = 16-Dec-07
and
Row 15 column A = 1320
then:
Row 15 column B must be 16-Dec-07
View 12 Replies
View Related
Jul 18, 2012
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
View 9 Replies
View Related
Aug 16, 2012
I need to achieve the situation below with a formula. I have tried simply doing, for example, = B3+1 but this throws an error, probably because the value being checked is alphanumeric.
Data
A001
Data
A002
Add next number (A003) when data entered in cell to left
View 2 Replies
View Related
Mar 7, 2014
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
View 2 Replies
View Related
Feb 4, 2008
I am looking for a way to do what i would call a dual vlookup.
i have some data in a number of sheets and need to do some consolidation into a summary sheet. problem is, not all the sheets have data in the same columns and rows but all the data is the same.
what i am trying to do is something like
vlookup("a",sheet2!A:M,***need to put the column of the data here***,0)
i cant just put in the column number because it changes on each sheet, need some way to do another lookup there, like an hlookup or something, so that i could lookup which column contained 'sales' and return that number so it can be put into the vlookup.
View 9 Replies
View Related
Sep 18, 2012
I have a value in a cell in Sheet2 (in this case its price per ft), on sheet1 is where I would input the number of feet. So can I multiply from data in cell on Sheet2 from cell on Sheet1and if so....
View 6 Replies
View Related
Jan 5, 2013
Currently have a column of cells that after the data has been entered we would like the cell to lock to prevent changes. The sheet is currently protected with the cells in question unlocked (D173:D250). We would like to be able to change the data if we unprotect the sheet. We would also like to be able to add/delete cells (list) in the code as needed.
View 9 Replies
View Related
