I have problem with changing multiple captions on pivot table.
I am using olap cube and I want to update all my "product code" captions on pivot table. Can it be done with VBA code?
I have old code-new code table and I want to replace the old code captions with new ones, copy paste does not work on pivot tables, and formulas are also not available, but is there a way to change the captions with VBA code?
I have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View Relatedhow to change in a for next loop the CommandButton.caption in a usersform
For n=1 To 300
CommandButton & n.caption= Sheets("info"). cells(n,1)
Next n
Pivot Tables. I've created a very simple one where my Row Lables are Salesperson then date and the second column is Sales. It looks "backwards" to me, because each salesperson's total sales for all dates combined is ABOVE the data by date. To make it worse, there's a line below the name, which looks like it's separating the name from the next few lines! With the next salesperson's name in the same "block" as the previous salesperson's details, it's very confusing! It would make more sense to me to have each salesperson's total be at the BOTTOM of their section!
View 6 Replies View RelatedI have this pivot table script that was working fine in another workbook. But then I needed it to run only on the last sheet of another workbook. So I took out "For each ws in worksheets" now I am getting an error "object variable or with block not set"
View 3 Replies View RelatedI have the VB code to change my pivot table using a drop down list. However, I would like use a list box instead. This is my current code I am using with the drop down list.
For Each ws In ThisWorkbook.Worksheets
For Each pt In ws.PivotTables
With pt.PageFields(strField)
For Each pi In .PivotItems
If pi.Value = Target.Value Then
[Code] ..........
I would like to have a pivot table that will count the number of responses I get for a certain question
For example on the attached book I would like it to look something like:
a
blue 1
red 1
yellow 1
green 1
aa
green 2
yellow 1
and so on, I am sure this is possible just not sure how to make it happen.
When I update the pivot table with new data, the column where I have some percentage numbers the formatting changes. One number goes back to standard. The new numbers that enter the column also enters as standard numbers. How do I get the column to stay in percentage numbers?
View 9 Replies View RelatedIs there any way how you can change value in page field in pivot table using formulas? I know this can be done with couple of lines of VBA, but I need to create VBA-free excel file.
View 4 Replies View RelatedI have attached the file. refer to the scorecard sheet where I have KPL Current Year(P02 Total), I would like this to be, instead of average, a division between the CF Kms Current Year(P02 Total) and Litres Curent Year(P02 Total). Is it possible to change it?
View 9 Replies View RelatedI have created Pivot Table in "Sheet2" and the source data is in "Report" tab. The source data is in the range of A1:K200 -means until the last cell of the excel. Now if the data is more then this we need to change the source data every time before we refresh the pivot table - Is there any macro or any way so the range can be change automatically ?
View 9 Replies View RelatedHow can I filter a Pivot Table from a cell.
Ex : I have a pivot table with regions (MW ,SE,SW,NE) .How can I enter the region in a cell and change the pivot table based on my input
I want to make a calculation in a pivot table where a percent difference is calculated by year.
The % difference from calculation does not show an increase from the previous year as 100% but a DIV/0 error. Can i make a custom formula that will use the year base field.
Right, I have tried everything I can do (which is not so much) to achieve the following. Can someone please help?
I have a worksheet with about 300 rows of data. The columns are headed Name | Division | Department and then 8 different scores and a total score). I have created 7 different worksheets with pivot tables on them to display each division.
Now, here is what I would like to do. Each Pivot table should show the Name and 1! of the scores next to it. That is simple enough and works. But how do I create a macro that allows me to change which score to display based on the content of cell A1. I.e. If I write Effort in A1 I want the pivot table to show Name | Effort score. If I write Complexity I want the pivot table to change to Name | Complexity score.
I have a workbook with a number of pivot tables as well as the source data for each pivot table. Some of the source data sheets needed to be deleted so now if I try to refresh the corresponding pivot table I get "Connot open pivot table source file '[Std Mthly Rpt.xls]Report_2'". I recreated the source file again and would like to know if I can link the pivot table to this new source file or do I need to create a new pivot table??
View 7 Replies View RelatedI have three worksheets Sheet 1, Sheet 2 and Sheet 3 with three Pivot Tables
Sheet1 - Sheet1Pvt1
Sheet2 - Sheet2Pvt2
Sheet3 - Sheet3Pvt3
When I use In Sheet 2 the following lines of code
Private Sub Worksheet_PivotTableChangeSync(ByVal Target As PivotTable)
Application.EnableEvents = False
Application.ScreenUpdating = False
MsgBox "The pvt table refreshed " & Target.Name
Application.EnableEvents = True
Application.ScreenUpdating = True
End Sub
and even If I Refresh Sheet 3 pivot table, Sheet 2 Event is triggered and it prints "The pvt table refreshed Sheet2Pvt2";
How to restrict the event code only to Sheet 2 and pvttbl Sheet2Pvt2.
I am using Excel 2010 and have a workbook with two sheets - "Risks & Issues" which contains the source data and "Risks - Summary" which contains a Pivot Table called "Dashboard"
I would like to create a command button called 'Refresh Data' which will be on the "Risks - Summary" sheet. When I add a new line to the "Risks & Issues" sheet, I would click the button in "Risks - Summary" and it will update the Pivot Table range.
So far I've tried using some examples found on this site, although with no experience in VBA macros, I'm not really sure what they do; all I know is that they cause an error.
Code:
Sub Refresh_Click()
Sheets("Risks - Summary").PivotTables("Dashboard").SourceData = Sheets("Risks & Issues").Range("A2").CurrentRegion.Address(True, True, xlR1C1, True)
End Sub
[Code].....
I have a pivot table with 10 sub total rows, I would like to know if it is possibe to change the font into bold for rows who are subtotals.
View 6 Replies View RelatedI have a vast amount of data entries in a pivot table (over 100). I want to create a pivot table but when I click on it it says 'count' and not 'sum'. It will take me a long time to change them all, how do I do it quickly? And possibly, without the 'sum of ....' in the label of it?
View 3 Replies View RelatedI can't understand why my rate1() function (my macro) doesn't work properly. While I'm dragging M5 cell in Sheet2 down to M14 cell it gives the wrong result.
Even when I change value in Sheet1 and refresh data of pivot table in Sheet2, my function rate1() isn't updated. But my problem is solving (getting the correct result) when I'm going Edit Mode (pressing function key F2) in active Cell M5 or M6 or M7..so on and pressing Enter each time.
I have the following vlookup formula in my spreadsheet.
IF(ISNA(VLOOKUP($A2,'Purchase Order Pivot Table'!$5:$500,67,FALSE)),0,VLOOKUP($A2,'Purchase Order Pivot Table'!$5:$500,67,FALSE))
It works perfectly for my current requirement, but it looks at data in a pivot table which is created from a dataset. If I name the columns in the pivot table so instead of looking at column 67 it looks at a name range will this name range change dynamically when the pivot table is refreshed? If not how can I get it to.
I have a pivot table with dates along the x-axis. The data is spread out over 5 years and the spacing between sampling events is not even, therefore, the spacing of my x-axis dates is not even. I want the x-axis to look similar to a normal graph where there is equal space between each month, even if I don't have data for each month. I do not want to group the data to accomplish this. If I click the "show items with no data" it only shows one extra day, not all days or even all months. I have excel 2010.
View 2 Replies View RelatedI've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using combobox on userform.
Sample Data
ID
NAME, INIT
GENDER
DEPT
SALARY
DOH
LOCATION
RAISE
1
Smith, J.
F
Sales
$41,250.00
2/2/1982
Boston
$45,375.00
[Code] .....
VB:
Sub CreatePivot()
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("Employees Data").Select
Range("A1").Select
[Code] .....
Error:
Private Sub ComboBox1_Change()
ComboBox1.Value = objTable.PivotFields("DOH")
End Sub
I am trying to add columns to my Excel 2010 Pivot Table to calculate % change of sales from year to year. The field name is "Year", while the item columns in the field are 2007, 2008, 2009, 2010, and 2011. How do I add a column between the years that will calculate the % change os sales up or down from the previous year?
View 2 Replies View RelatedI have the following code to update a pivot table:
Code:
Dim pt As PivotTable
Application.EnableCancelKey = xlDisabled
For Each pt In ActiveWorkbook.Worksheets("sheet1").PivotTables
pt.ChangePivotCache ActiveWorkbook.PivotCaches.Create _
(SourceType:=xlDatabase, SourceData:="source!R4C1:R33443C55" _
, Version:=xlPivotTableVersion10)
Next pt
the R33443 term is what will be changing, the columns and the starting row should stay the same. is there a way to instead of using R33443, to enable the range to be changed based on a cell value?
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
View 2 Replies View RelatedI have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View Related