I have a function Sum('1st Qtr:4th Qty'!AW1) in row 1 and dragged down 129 rows so the last reads Sum('1st Qtr:4th Qty'!AW129). If I insert a row the cell reference does not increment automatically below the insert location. How do I get it to do so. The insertion occurs when I run a macro.
View 3 Replies
I am trying to create a formula that references information on two different sheets, but i want it to show me the values that are newly created when a new row is inserted. The two current sheets are Master and Data.
I have a formula on Master that reads ='Data'!$K$3 to reference the value on Sheet data in cell K3. When a new row is inserted showing me the current readings, I want the Master sheet to show me the NEW value in cell K3 on the data sheet. The problem is, the insert of a row moves the formula on the Master sheet to now be ='Data'!$K$4. How can i STOP the insertion of a row from changing the formula so i continue to see the value i need?
how I can have a formula repeat down a column five times before it changes to another formula? For example. Say on tab 1 I have a list of products. On tab two I have five codes that repeat down the page over and over again. On tab two next to the repeating codes I need to repeat product one 5 times and then skip to product 2 on the 6th row and repeat five times and then skip to product 3 on the 11th row and repeat 5 times and so on?
View 10 Replies View RelatedI am trying to cut/paste a row of formulas in my spreadsheet. The problem is that I want some of the referenced cells in the formula to stay CONSTANT and not increment on each new row. In this example, I want the references to row 17 (F17,E17) to increment (E18,E19,...), but I want the "G7" reference to remain hard coded (as G7) on each row I paste (because that is where my master value is). (The formula is working fine) =IF((F17>0),IF((F17<=G7),E17,0),0)
View 3 Replies View Relatedneed to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedA 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I have a set of formula in column C to H. I have set a formula as sheet1+sheet2+ like this for about 24 sheets with different reference of cells. I want to change in the entire range of cells C to H as =sum(sheet1:sheet24!b04). The reference what I have mentioned changes in different cells.
View 9 Replies View RelatedI am trying to run a quick format on a table that includes adding a Vlookup formula. The formula references a table that comes out of a pivot table, so it has a different name every time. If I look up the new generated table name, and change it below it works. Is there a way to capture the table name and insert it into the formula? Or possibly rename the table to the same thing everytime (which I think is going to cause some conflict).
....
I have this If statement on one of the cells
=IF(A7=AQ6,AQ32,IF(A7=AR6,AQ32,IF(A7=AS6,AQ32,IF(A7=AT6,AQ30,IF(A7=AU6,AQ29,IF(A7=AV6,AQ33,IF(A7=AW6 ,AQ33,IF(A7=AX6,AQ31,""))))))))
If I want to change only A7 to A8, A9, A10 without changing the other parts of the formula, how do I do that. I need to copy this formula in about 300 rows.
I was using the formula below which was working fine for copying across 20 columns and down however many rows, but now the requirements have changed to 90 columns. I have tested this out with the 90 columns but the Indirect function is bogging down the spreadsheet with the constant recalculating.
=IFERROR(INDIRECT("'"&COLUMNS($A$1:A$1)&"'!P"&ROWS($A$1:$A8)),"")
I rearranged the formula to the one below, but how can I have the reference to the sheet name changed as in the formula above without using the Indirect?
=IFERROR(INDEX('1'!$A$8:$AT$115,MATCH($A3,'1'!$A$8:$A$115,0),MATCH("PAT",'1'!$A$7:$AT$7,0)),"")
The sheet reference will change from '1' through '90'.
I have been using the following formula to do conditional summing over multiple worksheets:
=SUMPRODUCT(SUMIF(INDIRECT("'"&$AB$2:$AB$13&"'!b3:b39"),$B16,INDIRECT("'"&$AB$2:$AB$13&"'!c3:c39")))
The formula works fine, but when I drag it to the next column c3:c39 stays the same. How do I get that reference to change when I drag the formula over multiple columns.
When I copy the formula to another cell, It doesn't show the result. But when I double click on it, it works. For example
there r values in A1 as "john" & A2 as "Jack". I write formula =A1 in cell B1. It shows "John". Now I copy this formula to B2, it shows "john" instead of "Jack" . When I double click on B2 & enter, it shows "Jack".
I want to copy a formula from Workbook A to Workbook B and have the formula configured with Workbook B's spreadsheet cells, not Workbook A's.
View 2 Replies View RelatedI have a table of consolidated data that consists of the date at which certain payments occur and their amounts that other sheets need to reference to perform calculations. I am currently using the formula below to put the data under the correct date column. =INDEX(ImportedData!$B$10:$DB$10,MATCH(B3,ImportedData!$B$4:$DB$4,FALSE)). The problem that I have is that the INDEX range, currently B10:DB10, will need to change depending on the number of files that are consolidated ie with more files the row will increase.
View 2 Replies View Relatedi need a macro which puts the formulas into the cells as per attached.
the number of rows between the "beam" can be variable
the number next to the beam will be variable.
the number of "beam" rows is vaiable
my thoughts where to do a find"beam" and refernce the cells address the create formulas off those points but dont have the skill to code this
beam macro.xlsx
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
how to change the formula below which is referencing an internal worksheet, to a forumula that will reference an external worksheet that is located in an excel document on the G: Drive.
=SUMPRODUCT(--(1210laradj_v_2009!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
So what it's doing is totaling the counts in the 1210laradj worksheet that match columns HMO-ALT SELECT as well as the numbers 3,5,9 etc.
Well now these worksheets will be on a seperate excel spreadsheet located on a network drive, so I am trying to figure out how I can fix this.
I tried adding it in like so, but it fails.
=SUMPRODUCT(--('G:ROC-CLAIMSAudit ResultsProvider infomonthly statsReproc'd claims2011ProductionCounts[0111rpt2235_laradj_v.xls]0111laradj_v_2009'!F2:F65536="HMO-ALT SELECT"),--(ISNUMBER(MATCH(1210laradj_v_2009!AO2:AO65536,{3,5,9,12,37,39,46,47,54,73,74,75,76,77,78},0))))
I have three sheets - Actual( which has actual figures from Jan - Dec), Budget ( figures from Jan - Dec) and a Summary sheet ( which is just the summary for the current month, say July and compares the budget VS Actual). Every month i need to change the summary sheet to the next months set of figures, say Augusts etc etc.
Currently i've been using find and replace, and changed the formula to the correct months column - but its a rather large spreadsheet( its a management accounts pack and has many many more sheets that link up - like lasts years comparison etc etc)
Is there any easy way of linking ( without VBA) or anything complex, so that each month i can change my data easily?
I have a master summary sheet that contains all the required information for 21 other worksheets. Each row contains the information for a single sheet. I have linked all the relative cells to the first sheet but would like create a formula that changes the row reference in each of the links rather than the tedious task of updating each individual link in every sheet.
I have tried using the indirect function but constantly get errors returned, the basic formula i have been using is: =INDIRECT("Summary"!C&,X1)
'C' is the column in the summary sheet that the information should be taken and 'X1' is the cell in the worksheet that will define what row the data should be taken e.g in one sheet the reference for that specific cell will be C5 and the next C6 and so on.
I have 2 Sheets in Excel: Sheet 1 & Sheet 2
Sheet 1 has some basic data (numbers) in a column, say AB1, AB2, AB4, AB15 (specific cells)
Sheet 2 basically references the data in a nicer template, with the basic forumala: ="Sheet 1"!AB1, etc..
Now...Sheet 1 has a new column inserted and new data added weekly, so AC1, AC2, AC4. AC15
How do I ensure that Sheet 2 recognises the new Column Insert (incremental letter) and references it automatically?
I'm using the following formula which is entered by using VBA on the worksheet change event but the cell reference 'A2' is not changing for each row, i.e. A3, A4 etc.....
Code:
=MAX(IF( 'Device Use - 4 month Period'!$A$2:$A$20000=A2, 'Device Use - 4 month Period'!$C$2:$C$20000))
I am creating a schedule to use for our helpdesk - it has pre-defined tasks that need to be assigned each day - easy enough to accomplish with a formula. And I've done this by using this similar formula on each line of the tasks (This first task is based on a manual entery into one field (B19))
=IF(AND(B6="Liz"),"Paul",IF(AND(B6="Paul"),"Mark",IF(AND(B6="Mark"),"Diane",IF(AND(B6="Diane"),"Jeff",IF(AND(B6="Jeff"),"Dan R",IF(AND(B6="Dan R"),"Chris",IF(AND(B6="Chris"),"Liz","")))))))
So, B4 is one task (phones) and the formula above (B6) is from another task (tickets) and then a third task (admin) looks at the value of B5 and uses the same formula above, etc.
However, I want to be able to change the value of a single cell, based on the (manual entry) value of another (out of task) series of cells (i.e. Sick (B35) & vacation (B36)) - and I don't want any of the other task cells(in the C cell series of 'tasks'), that are basically linked together by the value of the other cell, to change. Thus, in turn, would mean that the same person would now be in two different cells, and thus is creating a circular reference.
Let me spell this out a bit clearer.
The first manual field is B19 - If I enter 'Chris' into this field, then field C5 matches it. Then field B6 uses the formula above to figure it's value; as does B7 thru B12.
Now, If I put another manual entry into 'Sick' (B35), then I want whichever task that person is assigned to (for this example, we'll say I entered 'Jeff" into Sick, and Jeff happens to be on 'tickets' that day) to change to whoever is in cell B12 - but I don't want any of the other cells to change - but, since they are all dependant on each other, this doesn't seem like a possibility.
I've tried creating a count of names in the Sick or Vacation fields and then added this to the formula
=IF(AND(C5="Liz", B38=0),"Paul",IF(AND(C5="Paul",B41=0),"Mark",IF(AND(C5="Mark",B40=0),"Diane",IF(AND(C5="Diane",B40=0),"Jeff",IF(AND(C5="Jeff",B43=0),"Dan R",IF(AND(C5="Dan R",B37=0),"Chris",IF(AND(C5="Chris",B45=0),"Liz",B12)))))))
B38 being Pauls count; B41 being Marks, etc - so as long as their count equals zero, they are 'eligible' to fill that slot.
B12 is the last person on the schedule.
I'm preparing an accounting model for my office use. How to solve the copying of formula to all other cells.
The detail is here:
Sheet 1:
1) I've entered a number 1000 in L2
Sheet 2:
1) I've entered a values in columns D,E,F,G
2) Calculations :
at G2 : the formula is =D2*Sheet1!L2
The problem is when I Copy the formula in G2 through G3, G4, G5........... it changes to =D3*Sheet1!L3, =D4*ValidData!L4, =D5*ValidData!L5 and so on... but it should be =D3*Sheet1!L2, =D4*ValidData!L2, =D5*ValidData!L2, so that the L2 value shall be constant for calculations in all cells.
I have referenced data in two colums on a sheet A and B. Column A contains the latest data, each month i insert new column (moving column A to column B). However all of my references continue to follow the original data (eg will change from column A to column B). this happens despite using Absolute references. (=$A$1). Is there a way to lock these cell references to only ever display column A etc?
View 2 Replies View RelatedI have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedAnother interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedHow do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a very simple inventory spreadsheet that I used to keep track of certain products. The issue is that I often have to insert new columns and when I do, the formulas get convoluted. Is there a trick to making them follow the structure of the formula before?
My formula is =SUM(GT4:GU4) and appears in the Running Total column. When I insert two columns - a white column where an order will be inserted, as well as a running total column. When I perform the insert, the formula for the inserted columns, as well as the set of columns immediately to the right require corrections:
Inserted columns: =SUM(GT4:GW4) [Should be GV4:GW4]
Columns to the right: =SUM(GV4:GY4) [Should be GX4:GY4]
I know how to manipulate the formulas correctly, I would like to keep a clean file for my predecessor.
