Check If All Cells In Range Are Empty

Nov 3, 2008

I have an if statement as follows:


If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))

Then

i did a select to make sure it was selecting the whole range I want and it works fine:


Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.

View 9 Replies


ADVERTISEMENT

Check If Cells Are Empty If So Delete Range?

Jul 25, 2012

im having a little trouble writing a macro to :

check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'

View 2 Replies View Related

Check For Empty Cells In Non Contiguous Range

Aug 13, 2008

The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.

Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............

The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution

View 3 Replies View Related

VBA Check If A Cell Is Empty - Move 7 Cells Over And Check Again (Loop)

Aug 10, 2012

I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.

Code:
Sub Tester()

Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range

Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)

[Code] ......

View 1 Replies View Related

Check If Range Is Empty?

Aug 22, 2012

I have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.

Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""

[Code]...

But this won't start too after processing the do while line. How this .value command works.

View 7 Replies View Related

Check The Cells Are Empty

Jun 14, 2009

I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.

View 2 Replies View Related

Loop Macro To Check If Cells Not Empty

Jun 27, 2014

Column 'N' and 'O' will be used for inputting information and will never be hidden

Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro

Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden

The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )

If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met

The loop should continue checking for these 3 items through row 500

If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"

Upon closing the message box, the file should save and then exit

If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'

In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'

That last part will give the user a tool to see where they might have forgotton to enter data.

View 3 Replies View Related

Check If X Cells Are Empty Before Formula Calculation

Dec 5, 2008

I have a spreadsheet that uses IF(C5>J5,(EDATE(C5,12)),(EDATE(J5,12)))__ IF(J9<D9,(D9-$N$1)) where N1 is current date. If C5 and J5 are empty how do I get it to ignore the formula and just leave the other cells blank?

View 3 Replies View Related

Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

View 9 Replies View Related

Conditional Formatting To Check If Adjacent Cells Are Empty?

Jul 18, 2014

I've got a list and I need to check if the adjacent cells for a column are empty or not, and if both are empty then format to a certain color. I have a solution but don't know how to implement it into a format fit for conditional formatting.

I have this in the new rule section of conditional formatting

=IF(AND(ISBLANK(OFFSET(I4,0,-1)),(ISBLANK(OFFSET(I4,0,1))),(ISBLANK(I4)=FALSE)),TRUE,FALSE)

If conditional formatting would allow it I would simply change I4 to the entire range, I am very much confused as to how to format this cell to work with conditional formatting. (I4 is the first cell in the list)

Something else is that if I change I4 to I5 or something then moves all the highlighted cells around, and to top it off the first few cells which should obviously be highlighted aren't, even though the rest of the cells which should be highlighted are.

View 7 Replies View Related

Check For Blank / Empty / Error Cells In Select Case

Aug 3, 2012

I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.

However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.

Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.

As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..

View 2 Replies View Related

Lock Empty Cells In Range Based On Other Cells Content

Apr 18, 2008

I am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.

I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.

View 3 Replies View Related

If A Range Of Cells Is Empty...

Feb 27, 2007

=IF( SUM(S7:Y7)="","",SUM(S7:Y7)) - Produces 0
=IF(SUM(S7:Y7)="0","",SUM(S7:Y7)) - Still Produces 0

What I am trying to do is if ALL cells S7 thru Y7 are blank then be blank otherwise sum them. I've used this on a single cell, but not to test a range of cells. What I use for a single cell would be like this...

=IF(S7="","",S7) - Will not produce 0 if the cell is blank, just leaves it blank.

View 2 Replies View Related

Finding Empty Cells At A Range

Apr 7, 2009

I need code in VBA that look for empty cells at a range and return msgbox with the empty cell

View 5 Replies View Related

Check If Range Of Cells Contain Certain Value?

Mar 26, 2010

I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".

View 8 Replies View Related

Hide Columns If All Cells In A Range Are Empty

Jan 17, 2010

I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....

View 3 Replies View Related

Sum Time Cells In Range With Empty Text

Apr 4, 2008

trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.

The times have been entered as actual times of the day, formatted for AM/PM.

A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.

I attach a sample of the sheet.

View 3 Replies View Related

Check Range Of Cells For A Word?

May 28, 2014

This does not seem to be working and I do not know why.

If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If

View 1 Replies View Related

Check A Range Of Cells For Empties

Dec 11, 2008

Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?

View 2 Replies View Related

Check Range Of Cells For Data

Apr 12, 2009

I am using the following code to check data is entered in certain cells...

View 2 Replies View Related

Check For Colored Cells In A Range

Dec 13, 2011

detecting if a range has colored cells. What would the correct syntax be for the line in red?

Sub CheckForDups()
Dim ColumnNumber As Integer
ColumnNumber = 1
Columns(ColumnNumber).Select
Selection.FormatConditions.AddUniqueValues
Selection.FormatConditions (Selection.FormatConditions.Count).SetFirstPriority
Selection.FormatConditions(1).DupeUnique = xlDuplicate

[code]....

View 1 Replies View Related

Check If Any Cells In Range Are Numeric

Nov 4, 2008

If I have the following cells and values

A1 = 0
A2 = 0
A3 = ""
A4 = 0

I want a vba if statement that makes A5 = "Numeric.

If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0

I want A5 to = "Non Numeric"

Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""

I want a5 to = "Non Numeric"

Is there a way to do this without looping through each cell in the range?

View 9 Replies View Related

Check For Blank Cells In Range

Aug 25, 2007

I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.

The cells datatypes are mixed, some are Integer and some are String.

Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.

View 5 Replies View Related

Select Dynamic Range Based On Non-empty Cells

Aug 7, 2009

I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.

View 2 Replies View Related

VBA For Fill Zero For Empty Cells In Selected Range Using Mouse

Feb 13, 2013

I require a VBA code to fill Zero for empty cell in seceleted Range. Range will be select by Mouse.

I try following Code.

But It will not sucessed.

HTML Code:
Sub Zero()
Dim ws As Worksheet
Dim Specifiedrange As Range
Dim Rng As Range

[Code]....

View 5 Replies View Related

Check Non Contiguous Range To See If All Cells Are Filled

Feb 17, 2008

Is there a way to prevent a workbook from closing or being submitted until information has been entered into the following cells? B78, B80, B82, B84, B86, B88, B90, B92, B94, B96, B98, B100, B102, B104, and B106?

View 8 Replies View Related

Finding The Number Of Unique Items In A Range That Contains Empty Cells?

Aug 15, 2014

It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:

Formula:

[Code]....

And many of the variations of it when there are no empty cells in the range.

For a range of that contains empty cells I've tried this:

Formula: [Code] .....

And variations of it. It does not work, and I don't know why...............however..........

I ran across this on another [SOLVED] thread and it does work:

Formula: [Code] .....

I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?

It strikes me that this strategy likely has application elsewhere, too.

View 14 Replies View Related

Macro Challenge-Copy Range Of Non Empty Cells From 2 Sheets

Mar 20, 2007

first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.

View 9 Replies View Related

Macro To Check If Range Of Cells Values Are Balnk.

Jan 8, 2009

I am looking for a macro that will check 2 things....then do something.
The first is if a range of cell values in are blank. lets say
Sheets("Sheet1").Range("D6:G48").

Next is if a particular cell contains a given value ,
Sheets("sheet1").Range("E5") should equal "Year 1" if true.

If both these are true then I want the macro to copy a range of cells from
Sheets("Sheet2").Range("H6:H48") to Sheets("Sheet1").Range("D6:D48").

I tried to use IsEmpty but it seems to return a "False" if a range of cells
are being tested.

View 3 Replies View Related

Check If A Range Of Cells Matches Specific Text

Dec 19, 2008

How to check if a range of cells matches specific text.

Example:

A1 - dog
B1 - cat
C1 - mouse

I want the formula to give me "yes" if dog is present.

=IF(A1="dog", "yes", "no") is for one cell. However if I do it this way:

=IF(A1:C1="dog", "yes", "no") I get an error.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved