I am using a Pivot Table to sort, combine, and sum data. After this is complete I want to copy the pivot table and paste it (values only) to another worksheet and use the data again. The problem is the pivot table does not fill in all the blanks and leaves empty rows. The there a way to force the pivot table to fill in the labels?
View 6 RepliesI am writing regarding the Pivot table creation with data which contains empty rows.
Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.
As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.
However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.
new data goes into the report, the pivot table looks at a dynamic range and confirmed that the range doesn't select any empty cells.
Just wrote a macro to fill missing cells with a data on workbook open.
all the data is date form, yet still when i refresh the pivot table i look my montly grouping, when i try to group again it says "unable to group"
I'm trying to write a macro for extreme value analysis. I need a macro which will do a number of things! the attachment should explain it.
View 2 Replies View RelatedOn a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
I am working on a pivot table and am having issues with our subtotal: Sum / Averages.
The pivot is setup as so:
excel help.jpg
The problem is I need the average column to average the viewable area, and not from the data, so for example G28 should be 55 and not 6. Also, I need the Average of the fill rate to be a value.
I am having an issue with my macro code. Basically I am trying to filter a pivot table by selected criteria. The code seems to be correctly filtering the pivot table but the table appears with no data in it unless I manually refresh the table. This defeats the purpose of automating with a macro. I have attempted a "work around" of just refreshing the pivot table after the filtering is complete but that was unsuccessful. Here is the macro code:
Sub BigReportMacro()
Dim pt As PivotTable
Dim pi As PivotItem
Dim pf As PivotField
Dim E
Sheets("Pivots").Visible = True
Sheets("Pivots").Select
'Refreshing all the Pivot Tables
[Code] .....
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View Relatedhow to fill the blank cells in a Pivot table. I am using Excel 2007. How to do it in excel 2007. Heard that there is a provision in excel 2010 version.
View 9 Replies View RelatedI have data like Data have
entryxy
112
2
3
445
5
6
789
8
91013
10
for example i want to fill the 2nd row with data from first row, same way 5th row also with data from 4th row like 7 and 10. I am expecting my data table should have like this finally Expected
entryxy
112
212
3
445
545
6
789
889
91013
101013
Attached file : row fill.xlsx‎
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies View Relatedi have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
No matter what I do the data entered into the UserForm always goes to the next row that isnt formatted as a table instead of into the the next empty row within the table.
I have tried:
Code:
With Sheet2.Range("B1").EntireColumn
NextRow = .Find(What:="*", _
After:=.Cells(1), _
LookIn:=xlFormulas, _
Lookat:=xlPart, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row + 1
End With
and
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Long
Dim i As Integer, response As Integer
With Sheet1
LastRow = .Cells(.Rows.Count, "B").End(xlUp).Row + 1
[Code] .......
and
Code:
Dim LastRow as LongLastRow = Cells.Find("*",SearchOrder:=xlByRows,SearchDirection:=xlPrevious).Row
and
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)
I have a table into which I paste values to ColumnA. The other columns have formulas. The number of values to be pasted varies. When the number being pasted this time is less than the number pasted last time, empty rows remain above the valid data after sorting, which is undesirable. I want to get rid of those rows just before (or after?) pasting the new values. The way I see it is I want to delete all but the first data row of the table so the formulas remain untouched in the first row. Then, as new values are pasted the formulas replicate automatically.
Sample file is attached : Sample.xlsm‎
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedI have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I have a couple of drop down lists of data created from lists as well as fields next to it.
What I want it to do is take that data, which is name, start time, end time, days worked, queue (or work type), and fill the table next to it which is just a 30 minute by 30 minute schedule sheet with days of week 1 and week 2 on top.
I figure it would be easier to have a GO button to do this.
I will attach an example of what I mean, but please, if you guys find that there is an easier way to do this, just let me know, I feel this might involve some code/macros instead of excel functions
I am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9.
The next 'block' of data starts at row 10 and finishes at row 18.
Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies View RelatedHi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View RelatedI have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
I have a excel sheet with following 4 columns
Division Name:
Location Name:
Transformer capacity:
Transformer earth resistance:
Now how can I get answer of following queries in Pivot table. (Excel 2007)
1. % of a particular capacity of transformers in a division say % of 400 capacity transformers in all divisions.
2. % number of transformers having Transformer earth resistance value above a particular value in all divisions. Say % of Transformers having Transformer earth resistance above 2.6 in each division.