Check A Cell Value Existense In Another Table
Jul 6, 2009
I got a cell value and I want to check if it exists in another table. Problem is the second table splits the value and moves the last 2 chars on the right into the next column like this :
4112JJPV
4112JJ PV
Ive tried using vlookup with a LEFT(cell1,6)
and a RIGHT(cell1,2) in place of other values but im having no luck.
I need to check for the first 6 characters then if the next column the value is equal to the last 2 character on the right I would like a True value returned.
I eve tried IF(AND(COUNTIF( but im just getting errors ect
View 8 Replies
ADVERTISEMENT
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Feb 8, 2009
I have a table in excel range B5:M32 with the top two rows containing merged cells (B5:M6). I need to write a macro to copy data from cells B38:C38 into the above table.
I need the macro to first check to see if there is any data already entered i.e. check if the table is empty. If it is empty then paste the cells in the first cell (B7). If the table already has data entered i need to move to the last entry then move down one cell and paste the copied cells.
I have figures out the copying/pasting functions but am struggling with the part to check if the table is empty and moving down the table without using cell references.
View 3 Replies
View Related
Oct 8, 2009
I have a worksheet with a several pivot tables on it and this number can vary. I want to do, is check if a table with a given name exists, and if it doesn't create it, but if it does, to just .RefreshTable. I tried to use
View 2 Replies
View Related
Oct 5, 2012
I have a piece of code that duplicates all of the values in the page fields of one pivot table onto a series of other pivots tables. These can each have multiple selections
The only trouble that I am having is that one of the page fields has about 800 items in it, so looping through all of the values to make sure that they are checked, and then copy those selections into the other pivot tables is more than a little resource heavy.
I know that you can use a piece of code to see if a particular pivot item has been selected...
Code:
sheets("Dashboard").pivottables("ptcontrol").pivotfields("Year").pivotitems("2013").visible
.. but I want to know if "(ALL)" has been selected (without looping through every value). When the option to select multiple items is selected, the "currentpage" also doesn't work - it will always return with (All):
Code:
sheets("Dashboard").pivottables("ptcontrol").pivotfields("Year").currentpage
so... any takers?
This is my whole piece of code - I have changed the font to red for the bit that loops the pivot item values.
Code:
Sub pt_db_filter()
Dim wsMain As Worksheet
Dim ws As Worksheet
[Code]....
View 5 Replies
View Related
Jan 13, 2013
In Column C I need a "yes" or "no" answer to if the country code in B is listed in column A. I have 700 orders from country codes and need to understand which ones I need to charge VAT.
View 3 Replies
View Related
May 16, 2014
What I have is a table of employees names, which site they work at and a comment.
I have a table on another sheet with the addresses of all our sites.
What I need is a macro which will:
>look at the active selection
>copy their name(sheet 1, row B) & comment (sheet 1, row G)
>look up the site they work at (sheet 1, row D)
>copy the relevant address (sheet 3)
>paste the name and addresses into different sheet
>paste the comments into another sheet
This will be used to make printable labels for letters that we post out to employees. They will need to be split up so each name and address is printed on a different label.
The comments will be printed onto letters which will have a headers which is the same for everyone, but would be nice if they could be personalised with the comments of their managers and perhaps their names (something like "Hi John, you have been selected by your manager for your great work, please find enclosed your badge. Jeff's comments: "Comment 1""). But this part is a nice extra, the important part is the address labels.
View 3 Replies
View Related
Sep 12, 2013
right now, formula is simple as follows
Code:
Sheets("Shift Premium").Select
ActiveSheet.PivotTables("PivotTable3").PivotFields("DT_REPORT_DATE"). _
ClearAllFilters
ActiveSheet.PivotTables("PivotTable3").PivotFields("DT_REPORT_DATE"). _
CurrentPage = myDate
The idea is that the pivot table always displays yesterdays data.
However, there may not be any data for that day, so when i tell the macro to filter for it, I get an error.
My question is, how could I formulate some sort of iferror statement so that if yesterdays date isnt in the filter list, then it does nothing (by default leaving the filter on last populated date)?
View 2 Replies
View Related
Nov 18, 2013
I am building a table for staffing purposes, and I basically only need to controls to "validate"/approve the table.
1. The number of staff put in must equal the required amount of staff (E column)
2. The same staff cannot be put on twice for the same time period (which I have done by the OR(F7=G7,F7=H7,G7=H7) as part of the validation)
My problem is that sometimes I need 0 staff (when its closed), but when I leave it blank obviously it wont approve the table because of rule #2 above, since it thinks the blanks are the same staff member.
I have tried with some ISBLANK statements, but it wont work.
View 4 Replies
View Related
Aug 14, 2014
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
View 13 Replies
View Related
Jul 20, 2012
I am trying to automate creation of pivot table, where the first three fields will go into the RowLabel field, and the rest of them will go into the values as "Sum of ____".
Is it possible? Because I could do it one by one; however, those fields are different every time (there are different number of those fields, and their values are also different).
View 1 Replies
View Related
Jun 12, 2007
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies
View Related
May 21, 2008
how to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!
the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * $B$1)
View 7 Replies
View Related
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
May 23, 2013
I have a workbook with two worksheets,
sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score
sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score
i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.
View 5 Replies
View Related
Nov 22, 2011
If you have a data in two dimensional table. and you need to fill each cell with the value returned from another table.
Example : this the my table
Company A Compay B Company C Product 1
Product 2
Product 3
Product 4
and this my data :
Products Companies Price
Product 1 Company 8 Product 1 Company A 7 Product 1 Company B 5 Product 1 Company C 6 Product 2 Company B 6 Product 2 Company C 9 Product 3 Company A 10 Product 3 Company B 8.8
View 5 Replies
View Related
May 29, 2012
I want to check the contents of all the cells in S Column to see if it equals "Process Recover/Rebill"
If True, then Change corresponding cell in C Column to "Manual Correction"
I have this VBA and it doesn't look like anything is processing. It appears that I must have something missing in the If line..message about missing.
(tot_new is the number of rows of data) I begin in the 3rd row.
For Counter = 3 To tot_new
If Range("S" & Counter & ").Value = "Process Recovery/Rebill" Then
Range("T" & Counter & ").Value = "Manual Correction"
End If
Next Counter
View 3 Replies
View Related
Jun 7, 2008
I'm trying to look at a value in one column (Column A) and if it matches a set of criteria, I'm trying to change the value of another cell 6 columns to the right.(Column G) I've been trying for a couple of days now to get this working, but to no avail. I've tried to modify the code below that I've found on this site but can't quite figure out what I'm doing wrong.
Sub RatingsFix1SP()
Dim FindWhat, rngCell As Range, i As Integer
FindWhat = Array("BB", "B", "CCC", "CC", "C", "CCC+")
For i = 0 To 3
For Each rngCell In Range("A2", Range("A" & Rows.Count).End(xlUp))
If InStr(rngCell, FindWhat(i)) <> 0 Then
rngCell.Offset(0, 6) = 0.15
End If
Next rngCell
Next i
End Sub
To try to clarify a bit: If column A in the attached spreadsheet has a rating code of BB, B, CCC, CC, C, or CCC+, I want the Haircut % rate in column G to be 15%. It seems the code that I'm using changes the % rate to 15% if any "B" or "C" shows up in any part of the string in column A.
View 5 Replies
View Related
Nov 18, 2008
I have two cells where data is input in the form
1234A the suffix letters can be a,b,c,d,e,t,s,v
I need to check if the suffix letter from both cells match up...
a can only match a
b can only match b
c can only match c
d can only match d
e can only match e
a-e can match t
s can only match s
v can only match v
is this possible without any macros?
View 9 Replies
View Related
Nov 3, 2008
I am using a menu button to run a macro. Before running a particular Macro, I would like excel to check if the cell A1 of a worksheet named 'MC_1921' contains the phrase 'Master Curve' ...if it does then the macro runs otherwise gives an error message.
View 4 Replies
View Related
Sep 17, 2009
I'm trying to write a vba code that will do this actions: the code will check if a text in cell b2 and cell c2 identical , if it's true, insert a new column d, and the value of d2 is the sum of cells b2+c2. if false - do nothing. I need to run the check, from row 2 to the last row with values in this sheet.
View 3 Replies
View Related
Mar 6, 2007
I am using the forms toolbar. I am just trying to place a simple check box in a cell (assigned to a cell). After I place the check box in the cell, if I resize the cell, the check box doesn't follow or stay assigned to the cell. I go into format control options and try to select "move and size wtih cells" but that option is greyed out.
View 9 Replies
View Related
Aug 14, 2006
I have large report, and I need to be able to check if a cell (on each row) contains within it either "AF","LF","FF","FS","HF","WF".
The problem is these letters may be in the middle of the cell, not always the same length from either beginning or end.
View 3 Replies
View Related
Nov 3, 2008
I am using this code
View 5 Replies
View Related
Jan 18, 2014
I need a formula to verify whether a cell contains Alphabet or not.
View 5 Replies
View Related
Nov 10, 2008
I need to check if a cell ends with {"a","b","c","d","e","S","t","v"}. and if it doesn't diplay a warning
this is what i have
--------C
10----4444s
=IF(RIGHT(C10,1)={"a","b","c","d","e","s","t","v"},"GOOD", "Must enter Suffix Letter")
View 3 Replies
View Related
Nov 18, 2008
I want to check if the value of a cell is the multiple of another
for example cell A1 is 6
and cell B1 is 2
This is valid because 2*3=6 but if cell A1 was 5 then it should display that its not valid!
View 2 Replies
View Related
Sep 5, 2008
a code that can check the values of a row, and if it is equal to zero, or has no value in the cell, then delete the entire row. Let me know if you need more info or anything.
View 13 Replies
View Related
Dec 3, 2008
I'm looking for an if/then statement that will check if there is any kind of value in cell b before doing a calculation to cell J
View 7 Replies
View Related
Apr 21, 2009
My question is about checking to see if a cell contains a particular word.
I know that the following checks to see if a cell's value IS a particular word:
View 2 Replies
View Related
