When I use the following code, the spell check still checks the entire sheet. How do I have the spell checker on check a specific cell/range of cells?
Sub spellchecker()
Range("B7").CheckSpelling
End Sub
=IF(D$21="SOUTH FLORIDA 6","6 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S15=24),"24 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S17=12),"12 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 6",S16=6),"6 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 12",S14=18),"18 MONTH FENCE RENTAL",
IF(D$21="SOUTH FLORIDA 12","12 MONTH FENCE RENTAL",
"BIKE BARRICADES ARE ALSO AVAILABLE"))))))
I having trouble getting this IF statement to function properly. The Bold section is the part that will not function properly. I have checked all the spelling, spaces, but for some reason it wont display properly.
Based on the above is there a way to make this a type of lookup?
Im at wits end with all the ifs.
Is there any way to use formula or VBA to highlight cells which contain the correct spelling?
For example i have columns A filled with words in each cell but need to highlight which ones have the correct spelling, as there are more with incorrect so i need to visually see the correct spelling.
I'd like to check if a user supplied string is single cell reference. My problem is that the below code comes back as vallid if I enter a range like B2:B4.
Sub test2()
Dim UserAdd As String
UserAdd = InputBox("Enter your address")
'check if valid:
If ValidAddress(UserAdd) Then
MsgBox ("it's valid!")
Else
MsgBox ("it ain't valid!")
End If
End Sub
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedHow a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
I have a number of Vlooks set up to reference cost information set up against Names in various workbooks.
The problem is wherever a name is mis-spelt then the lookup fails to match the values.
Let's assume I've got a list of 100 words (most spelled incorrectly and located in cells A1:A100) and I want to place only the words spelled correctly into Column B. For example, if 10 words are spelled correctly, they should go in cells B1:B10.
I start with the first word in cell A1 and move it to cell B1 to be spellchecked. If it's spelled correctly, I keep it in cell B1 and move the word in cell A2 into cell B2 to be spellchecked. (If A1 is spelled incorrectly, I move the word in A2 into B1, thereby discarding the misspelled word.)
Can I code this so that when the spellchecker box opens (i.e. word is spelled wrong) it will close automatically (e.g. [cancel]) and move to the next word?
I have a spreadsheet that I'm using for a college football pool. We have almost 100 players, and have it set up for each player to pick up to 20 games each week. There is a sheet for each week of the season. Now, I copy each players picks from a message board and paste them under that players name. My problem is, that some people don't spell the teams correctly or abbreviate when they were told not too. This leads to them missing the points because excel sees it as a wrong entry. What I wantto accomplish is setting up some way to have excel verify the spelling is correct when the players entries are pasted in the sheet. I would also like it to auto-correct errors it finds...say a player types in Ohio St. but the winner is entered as Ohio State...This would be seen as a wrong entry for Ohio St. so I want excel to recognize it and correct it. Also simple spelling errors as well...
View 9 Replies View RelatedIs there any way for excel to automatically choose the next best spelling option for many rows of data containing mispelled words? For example, is there a way to automate pressing "Change" on every mispelling window when pressing F7?
View 8 Replies View RelatedI have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies View RelatedMy workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI think this can be done by using VBA but i was wondering if there was a way to do this without.
I would like to highlight (with Conditional formatting) if a cell contains a formula. Or if easier, colour a cell if it doesnt contain a formula.
Is it possible and what formula to use in the conditional format formula field to do this?
My .find function is only finding the 2nd value in a cell example If i look up the term " HOSE"
5/8 hose water Will return
5/8 heater hose will not
Basically what I am making is something I am calling a "what" button. It queries my database and returns all the part numbers with the term i put in and i thought it was working fine till i was testing it, did i do something to select this? I've tried xlpart and xl whole. Neither is working.
Here is the code below
Sub COPYPARTNUMBERINFO()Dim parttofind As String
Dim partcell As Range
Dim partref As Range
ActiveSheet.Unprotect Password:="*******"
Range("t6:T10000:u6:U10000").Select
Selection.ClearContents
parttofind = InputBox("What is the number or discription")
[code].....
I have a data set containing text (no numbers) that spans several columns and rows. I have a list of 'allowed' words (about 100 words) that can be in these cells. If a cell contains a sentence with a word that is anything other than these allowed words it should be somehow marked. Ideally the 'wrong' word itself is marked, but it would already be very useful if the cell that contains the word is marked in some way.
I tried conditional formatting, but it seems to only allow formatting cells that contain a certain word, not if it doesn't contain certain words. Is there a function or a script that would be able to do this?
Simplified example:
Say you have four allowed words:
Apple
Pear
Orange
Banana
You have the following cells:
>Apple Banana
>Pear Pear Orange Pear
>Banana Apple Orange Kiwi
The third cell should be marked because it contains a word outside of the set.
Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 Replies View RelatedIf Not stfound Is Nothing Then 'if value is found then do this
is causing me a run time error 424 when I try and run my code "Object required". Entire code is pasted below...
Option Explicit ....
Right, sorry this is probably a simple one but I can't do it... I have information in a variable that is "1-4" the variable is defined as a String but whenever I use the following code excel turns it into a date.
View 2 Replies View RelatedI am trying to use a cell reference to have excel automatically Save a worksheet using a cell reference as the workbook name. When I step through the code and use the immediate window I get the correct name for the file (fname in this case) but as soon as Excel tries to save the file, I get an error.
Here is the code I am using:
fname = Sheet3.Range("I1").Value
ChDir "S:Op CostsBudget 2013Data"
MsgBox "The actice file will be saved as " & fname
ActiveWorkbook.SaveAs filename:= _
"S:Op CostsBudget 2013Data" & fname & ".xlsm", FileFormat:= _
xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
I know there must be some way to write vba to force users of an excel sheet to choose from a drop-down list for that particular cell. I am having trouble with a spreadsheet that is used widely through the company with people doing copy/paste or just typing in entries.
View 2 Replies View RelatedI have a userform listbox2 that i am trying to save info from to a worksheet.
I am getting the error "Object doesn't support this poperty or method" when I am trying to set the cell of a find ......
I have the following code in Destination.xlsm that is intended to:
request the user to select a multi-cell range in a column of single-sheet Source.xlsm, in which some but not all cells contain "Y" (to indicate that this row of data relates to a National Account, versus a Territory Account)loop through the selected range, and whenever a cell contains "Y", copy the entire row and insert it in Destination.xlsm above a cell named "rngDest".
Code:
Sub Copy_NationalAccounts_Rows()
Const Message As String = "Select the entire range containing National Account Y flags, then press Enter or click OK."
Const Title As String = "Copy National Accounts"
Dim rngSource As Range
Dim rngDest As Range
Dim r As Range
Dim c As Integer
Dim wbk As Workbook
[Code] ........
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies View RelatedI have a string of text in cell A2. In cell B2 of my spreadsheet is a formula that calculates a number based on the text string in cell A2.
I want to write a VBA loop that removes a single character from the cell A2 string, then calculate the new value in cell B2. I want this loop to continue until the value in B2 falls below a set value (in this case 60).
My code so far
Sub trim_text()
Dim mytext As String
Dim myanswer As Integer
mytext = Range("A2")
myanswer = Range("B2")
Do While myanswer > 60
mytext = (Right(mytext, Len(mytext) - 1))
Loop
End Sub
This obviously does not work. In my excel table I have a formula in cell B2 to calculate "myanswer" will this work, or does that code have to be placed into the VBA code?