Excel 2003 :: Renaming Textboxes Based On Their Position In Sheet?

Jun 14, 2013

I have an excel file (2003 version) with one sheet called sheet1.

On sheet1 I have multiple text boxes, however each text box has the same text box number "Text Box 1244" (this number appears in the top left-hand side in excel when I click the textbox).

I was wondering if it's possible to rename the text boxes based on their location on the sheet.

Eg. If i had a sheet with 5 rows of text boxes and 3 columns of text boxes (15 text boxes in total).

The top left-hand box gets renamed to "Text Box 1", then the text box below that gets renamed to "Text Box 2" and so on to the bottom of the sheet to "Text Box 5". Then the vba script would move to the text box that was to the right of the first text box (1st row again but 2nd column), and rename all the text boxes in that column ("Text Box 6" onward).

The outcome would look something like:
TB1 TB6 TB11
TB2 TB7 TB12
TB3 TB8 TB13
TB4 TB9 TB14
TB5 TB10 TB15

I'm stuck on this problem a while now and cannot find any scripts to solve it. My VBA is non-existent, I usually get by on bits of code I find on the web.

I hope each textbox has a hidden co-ordinate associated with it, then it might be possible to loop through all the textboxes based on their positions and rename them.

View 3 Replies


ADVERTISEMENT

Excel 2003 :: Renaming All FileName In Folder Using Macro At Time With Different Names

Sep 23, 2010

Now iam Working in excel 2003, I got a Requirement that, After Downloading datas From SAP, It Directly Stored in Excel Sheet , Using tht Sheet1, I need to rename all the Filenames at a time, Is It possible, Any code is there to rename,

For Example,

From SAP to Excel Sheet Datas are Like this in Sheet1,

DmsNo Filename
50007685 SDFFG.jpg
50004678 HGJKID.jpg
50003421 VGFTHR.jpg

Then i have rename that filename, rename 'SDFFG.jpg' To '50007685.jpg', and it Should be directly rename to my Source File.

For Example:
Source File: C: estSDFFG.jpg

After renaming it Should be,

Source File: C: est50007685.jpg

any code is there to rename,

View 4 Replies View Related

VBA Shortcut For Renaming Multiple TextBoxes

Jan 9, 2010

Is there a shortcut to rename multiple TextBoxes?

So far I've been renaming each individual TextBox manually. This takes forever...

I have a lot of TextBoxes & hope there is a faster/easier solution.

Example:
TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10

View 9 Replies View Related

Excel 2003 :: Copying Row To Different Sheet Based On Condition

Feb 16, 2013

I wanted to know if it was possible for me to be able to copy a whole row into a different sheet based on a column value. For example, if B6 = CLOSE, the whole row would be coppied to the sheet name CLOSE. If B6 = OCCUPIED it would be copied to sheet name OCCUPIED. I also need if W7 = to a date thats passed today it would be added to the sheet name EXP PRD. An off topic question, i have this code for column "W":

=COUNTIF(W6:AD155,">"&TODAY()+15)

It works just fine, but I also have "N/A" / "INDEF" in the blocks as well so it's not giving me the correct results. I'm using Excel 2003.

View 8 Replies View Related

Renaming Images In Folder Using Data From Excel Sheet?

Dec 8, 2013

I have an excel file which consists of old name and new name in two different columns. I have 500 photos in a folder. I want to rename the photos with the new names when there is a match with the old name(same as that of image name) in the excel.

View 4 Replies View Related

Generating Multiple Textboxes With Relative Position

Apr 2, 2007

I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"

Private Sub MakeNewTextBox()
Dim newTextBox As TextBox
Dim ControlTop As Long
With LastAirport
ControlTop = 30
End With
Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True)
With newTextBox
.Left = 20
.Top = ControlTop + 3
.Height = 15
.Text = txtAPID.Text
End With....................

View 2 Replies View Related

Excel 2003 :: Take Specific Text From Cell And Copy It In New One (Text And / Or Words Position Varies)

Jan 17, 2013

I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.

Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)

Useful information are included !!!

I'll give an example of a record...

Column: BZ, Row: 543 says --> "2110000000-6989000000, 1TOK_TER:17-11-010(25 DAYS LESS),
KATERINA 25 (MANTAS KALNNNNN_HYPERTENSION)1000-150, W:95_105, , HR THE 16wks_US NEFRON OK,
NT OK_B EPIP OK(GOLF BALL)_KAMPILI ORIAKI(DIAITA)_DOPPLER OK, O+,TEST OK(TOX_), , , , , , "

Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...

Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:

Function MyMerge(Rng As Range)
For Each Cell In Rng
Temp = Temp & Cell.Value & ", "
Next Cell
Temp = Mid(Temp, 1, Len(Temp) - 2)
MyMerge = Temp
End Function

Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469.
Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...

View 9 Replies View Related

Excel 2010 :: Hide / Show Textboxes And Labels Based On Combobox Selection?

Jul 8, 2014

I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...

So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...


Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...

I'm using Excel 2010 on windows 7.

Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False

[Code] ..........

View 3 Replies View Related

Excel 2003 :: Conditional Format - Highlight Cell In Sheet 2 If Duplicated From Sheet 1

Mar 25, 2014

I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.

I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.

View 3 Replies View Related

Excel 2003 :: How To Detect Pattern In Sheet

Aug 25, 2013

We have a huge excel-sheet, containing disputes with customers. Everytime there is a dispute, the customers data will be transferred into the sheet. The sheet is organized like this:

DATE / NAME / ID / COMMENT / FREQUENCY (how often one customer appears in the list) /ID2 (ID combination of the date + ID) /Weekday

And here comes the task:

Find all customers who appear 10 work-days(Mo-Fr) in a row. So if a customer appears Mo-Fr and keeps on being in the list the next Monday etc. it still counts as "in a row". Same with official holidays. If a customer appears at a certain date he is "booked" and it doesnt matter if a appears a second time on that specific date.

Attached to this post you find an example in which you can see the structure of my excel sheet!

example.xls

Note: I had to use a german version of excel when I made this little example - thats why the formula in the collum "Frequency" says "Zahlenwenn" its the german version of COUNTIF

Excel 2003

View 7 Replies View Related

Excel 2003 :: Selecting Only Certain Items From One Sheet To Another?

Mar 26, 2012

Using Excel 2003

We have a spreadsheet set up showing a list of sales invoices, each invoice has the customer name and a customer reference assigned to it i.e B1, B2 etc

We want to set up another sheet that takes the sales invoice information but only picks up that which relates to a specific customer, i.e want a list of the invoices relating to B1

This will be done with a view to creating statements for each individual customer reference number which will just take info from these sheets B1,B2 etc

View 1 Replies View Related

Excel 2003 :: Log Sheet - Creating Invoices

Apr 20, 2014

I am using Win XP Pro, Excel 2003. In the workbook, I have a invoice spread sheet (lets call it sheet1) to create invoices. Once the invoice is completed, I save it with this macro which saves it to the contents of E3 and E7 for the file name:'

Sub SaveMeExtraQUOTE()
Application.DisplayAlerts = False
' Dialog's Title
strTitle = ""My Tite""
If MsgBox("WARNING !! STOP! Enter ALL your quotes information to be saved BEFORE saving the file!!!

[Code] .......

This is working just fine BUT it keeps saving it to a template file where the master template is kept. Why will it NOT save it to the QUOTES folder when I am using this:

Filename:="C:EXCELATX Concrete DesignQUOTES"

I am also trying to have a space between the contents of cell E3 and E7 when the file name is saved. Now it just puts them together.

View 2 Replies View Related

Update A Cell Value From A Previous Sheet After Copying The Sheet And Renaming It

Nov 21, 2009

I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"

Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.

I am stuck however referring to the previous sheet to update the date value in "A1"

View 7 Replies View Related

Excel 2003 :: Macro - Move Row Down Based On Value

May 20, 2014

I'm new to macros. I have a data range of A6:H100.

If cells in column H (Complete?) = Yes I want the row moving down to the next available empty row.

Collection DateCustomer Order NumberNo of PalletsHaulierContact Date Collected Complete?

(I'm using 2003)

View 1 Replies View Related

Excel 2003 :: Highlight Row Based On Specified Columns?

Dec 19, 2012

I would like to have Excel 2003 be able to highlight the row if there is data in certain columns. Specifically if there is a number greater than zero.

For example the following could work:

[CODE][=OR(LEN(H9),LEN(I9),LEN(K9),LEN(Q9),LEN(R9),LEN(S9),LEN(W9),LEN(X9),LEN(Y9),LEN(AB9),LEN(AD9))/CODE]

However, there are times when I need to add a column/criteria. Thus I would have to go into conditional format and redo all the rows in the worksheet. Is there a smarter way to do this?

I was hoping to provide a list of cell address from the header or better than that look for specific numbers in the header row and if there is a number greater than zero, then highlight the entire row.

There is no specific pattern as to which columns would trigger the requirement.

Also how do you keep the ranges from moving when copying across and down. Sometimes I run into that issue. Maybe highlight the entire row and then enter the conditional format?

View 9 Replies View Related

Excel 2003 :: Formula To Pull Data From One Sheet To Another?

Jan 16, 2014

I have Excel 2003

My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.

I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.

View 1 Replies View Related

Excel 2003 :: Identify All Sheets Related To One Sheet

Oct 13, 2011

I have been given an excel model to review;the workbook has 53 sheets. I would like to know if there is a way to create a flowchart/matrix with the relation of all the sheets. I would like at least to get a list of all the sheets related to each sheet. All what I was able to do is to get all the sheet names in one sheet. (I am using Excel 2003).

View 2 Replies View Related

Excel 2003 :: Finding First Empty Cell In The Sheet?

Nov 8, 2011

I have two work sheets where I have data.

Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501

Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.

SALARY DATABASEMonth Name Salary Bonus

Problem:

I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.

View 9 Replies View Related

Excel 2003 :: Error When Pasting To Protected Sheet?

Feb 7, 2013

Excel 2003
Windows Vista

I keep getting this error: (at the line highlighted in green)

Runtime error '1004'
PasteSpecial method of range class failed
**** Open workbooks to transfer temporary data

[Code]....

View 2 Replies View Related

Excel 2003 :: Information From 6 Different Worksheets Populating One Master Sheet?

Oct 23, 2013

(EXCEL 2003)I have 6 worksheets for 6 separate ad reps that will be populated with customer info. To make my life simple I just want column A from each of the 6 worksheets to show up on a master sheet in column A. But what also needs to happen is if we add and delete customers that also needs to happen on the master. I understand the "=" and then pointing to a cell in another sheet and hitting enter. I got that to work but I just have soooo many cells to work with that would just be way too time consuming.

View 2 Replies View Related

Excel 2003 :: Extracting Sub Sheet Of Data From Larger Schedule

Dec 31, 2013

I have sheet containing a schedule of data. It is a record of changes on a project, each change is sequentially numbered and contains a row of data (date of change, whether approved, cost of change etc). Each change is given a cost centre reference (1 of 10 cost centres are being used) depending on the type of change being made.

I need to keep that record of the overall schedule of changes but I also want to extract each of the cost centre categories into a sub table on the sheet to give a schedule of changes against each category.

I have almost achieved what I want but one method leaves blanks in the sub table which I want to avoid and the other method I used to remove the blank lines but needs the first method sheet calculated before it then goes to work and seems rather cumbersome and I suspect there is a much easier method. (I also want it to be compatible with excel 2003 so it can be used across several platforms.)

View 7 Replies View Related

Excel 2003 :: Unprotected Cell Won't Allow Input On Protected Sheet

May 19, 2010

Using excel 2003, Workbook has several sheets, all sheets are protected workbook is not. I have my cells containing formulas locked, I have unlocked the other cells that require input of various data. When the user goes to type in a "unlocked" cell, (to over write the now obsolete data) it will not allow the user to delete the data, the curser remains a cross and the formula bar or the cell itself will now allow any changes.

I have double checked that the cells are unlocked. I can enter data after the last entry in the unlocked row and or column, but I want to be able to "cut or delete the data that is no longer need and begin entering data from the beginning cell of choice. I want to copy this "old" data to an archive sheet, but it will now allow me to select it.

Example: I have 6 columns starting, (a to f) the formulas are in columns e and f and start at row 4 These columns are locked and hidden. Columns a,b,c and d are unlocked for user input. All data is started from A5 which I want it to start from each time the old data is deleted and new data entered. If I place my curser on any of the cells in the e and f rows, the cursor remains a cross which is what I expect it to do, but columns a to d are doing the same thing, they are acting as if they are locked OR atleast those cells in the a to d areas which have existing data, as I can enter below.

View 7 Replies View Related

Excel 2003 :: Deselect Grid Lines To Get Clear Sheet

Jul 15, 2012

How do i deselect grid-lines in Excel 2003 so as the sheet is clear.

View 6 Replies View Related

Excel 2003 :: Delete Duplicates Based On Value In One Column

Jun 5, 2014

Excel 2003 - delete duplicates based on value in one coloumn.

very simple but how!i want the whole row deleted where there are duplicates in one column but ONLY the duplicates, so, if they're 3 duplicates in the column i want 2 deleted leaving 1 unique record.

View 4 Replies View Related

Excel 2003 :: Find Last Value In Column And Copy Paste Cells To Another Sheet?

Dec 19, 2011

I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.

I need the VBA code for Excel 2003.

View 1 Replies View Related

Excel 2003 :: Extract Information From Spreadsheet Database Into Another Sheet With One Trigger?

Nov 27, 2012

I used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....

I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.

In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.

This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.

How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?

I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell

View 4 Replies View Related

Excel 2003 :: Get Sums Based On Codes In Dropdowns By Week?

Jan 24, 2014

I am using Excel 2003.I need two distinct sums:

I need to calculate out the loan amount of approved loans by week (weekending on Sunday). For example for the week ending December 28th, 2013

$1,234,567,890 in total loans

I also need to have a list of sums of the loan amounts per code types of approved loans. For the week ending December 28th, 2013

$123,456.00 in total loans for Code: LTV/TLTV > Guideline max
$987,654.00 in total loans for Code: FICO > 10 pts below Guideline min

I need to ignore any loan amounts and codes for any loans that have not yet had a approved date entered and also ignore all loan amounts for any loans that are denied. I have tried doing this in many different ways with Pivot Tables and I am not getting the results I need.

View 1 Replies View Related

Excel 2003 :: Copying Cells Based On Alternate Cell Value?

Sep 26, 2011

I am wondering if it possible to automate the copying of data from particular cells, based on a value in a different cell, into a different format.

So to go from this simplified table:

AB1NameLevel2Arthur2a3Briony3c4Catherine3b5David3a6Edward2a7Felicity3c8George3c
to something like this:

FGHI12a3c3b3a2ArthurBrionyCatherineDavid3EdwardFelicity

4
George

At the moment I do it all manually, and it takes forever. I am sure there must be a simple way of doing it. I am using Excel 2003, but could work in a newer version if required.

View 9 Replies View Related

Excel 2003 :: Conditional Formatting Based On Application Of AutoFilter?

Dec 7, 2011

I was wondering if it is possible to have cells formatted based on the presence of an autofilter? I have a large worksheet, and to clean it up I would like to make the entire sheet (minus the category headers) invisible. Then, when the user applies a filter, the cells become visible.

View 1 Replies View Related

Excel 2003 :: Macro To Copy And Read Cells Based On Name

Feb 5, 2012

I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.

I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.

The Absent Log workbook:

This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.

The Production Model workbook:

I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.

I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.

I uploaded the workbooks to filefactory.

OT Workbook: [URL] ......

Absent "Log" workbook: [URL] .....

Production Model: [URL] .....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved