I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012() Dim rngSource As Range Dim rngDestination As Range Set rngSource = Range("D3:E90") Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2) rngSource.Copy rngDestination.PasteSpecial (xlPasteValues) End Sub
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted b) Trigger the macro c) A row is inserted above the highlighted row in Tabs #1, #4 and #5 d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25 - on a different column every month (same column across all tabs) - on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
I have a spreadsheet with 12 tabs, 1 for each month in the year. On each tab I have employee names (column A), followed by the premium they pay for their health insurance (column B). I'm attemting to create a list of each employee and how much they paid for helath insurance over the year. Since employees come and leave thorughout the year, the lists aren't the same on each tab. However, I was able to create a master list of all possible employees and placed this list into a new tab.
I'm vaguely farmiliar with the SUMIF function and I believe that this would be the best approach, or some possibly sort of vlookup.
I've been asked to compile and sum weekly sales data. The problem is that the data was supplied in 52 separate tabs, for each week of the year (I don't know who on earth thought that would be the most appropriate way to send the data).
Is there any quick way to import all the data from each tab into one worksheet? The data is laid out the exact same way on each tab. All the row and column headings are the same, and in the same cells. Only the numbers are different (obviously).
I have a summary tab in which I am trying to sum data based on specific variables from 30 other tabs in the worksheet
- In the summary tab, I have months (one year worth) over the top row and consultant names in the first column - Each other tab represents a project - I want for consultant 1 in summary tab, to have: For january, the sum of dollars spent in january in each project (so across all tabs) Same for february to december.
I have attached an exemple Note that the consultant names will always have the same syntax but will not necessarily be in the same cell in each tab.
I need to split up the "master" table so that for all rows where DOL1 falls with a year range of e.g 6th April - 5th April (in any year) then this row is moved or copied into a new tab based on the year range.
i.e. The first row should appear in a new tab for the range 6th April 1978 - 5th April 1979. The marco should be ale to create and name new tabs. The tab name will be 78_79.
The second row should appear in the 87/88 tab.
I have several thousand rows of data with dates ranging from 1978 - 2012 so there should be tabs populated for every year from 78-2012.
I have imported data into excel arranged as per the following and there are separate tabs per year. I a trying to summarize and phase the balances per client..i.e 07,08,09,10,11,12.
Therefore if client x balance in 2007 = 10, 2008=11, 2009=10, 2010=2, 2011=3 and 2012 = 5 and so on...then total the balance owed as of now and also phase it as illustrated below. I've tried vlook up's?
I had a friend attempt to help me with this issue but he couldn't figure it out. He suggested that I tried asking around here.
Here is what I am trying to accomplish: (I am happy to email anybody the spreadsheet to help out with this description)
1. There are two spreadsheets. One spreadsheet with about 25 tabs (one for each store number) and one spreadsheet with one tab and about 1400 lines of information that is sorted by store number. To preface, this 1400 line spreadsheet can be 900 lines one month and 2500 another month, so it fluctuates.
2. From this spreadsheet sorted by store, I will highlight, cut and paste into the corresponding store tab on the first spreadsheet. Also, at any given month, the information fluctuates, it can be 15 lines for one store one month and another month it could be 5.
3. Once I am done cutting and pasting it all into each seperate tab, I have a 26th tab that I am looking to create a button that will then pull all that information into the 26th tab.
I know - first question is why would you want that? You already have all the information from that original spreadsheet. Well, in these store tabs, I have everything perfectly formatted a certain way and I only really cut and paste the information that I need from the 2nd spreadsheet.
I have a spreadsheet that my friend claims he got close to working it out.
Just to add, I would need this button to take into account that the information in each tab fluctuates and also that it is easy to add a tab if I add stores.
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
I have 5 cities and each city has a set of data in separate tabs. Right now i have data pulled for all 5 cities in a single sheet but its too cramped up..
I want to use a drop down list (data validation) and if any of the 5 cities are selected in the drop down, the data from that particular city (tab) should be pulled up. This way my sheet size will be reduced 5 time which will look good.
A common v lookup wont work because the data has to be pulled from 5 different tabs for 5 different cities.
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
I'm pasting a lot of data into a spreadsheet and then using a macro to split the data into three different sheets/tabs. I'm doing this by simply copying entire columns. Each sheet/tab has a headings row and autofilters added so that my boss can filter on certain manufacturers in one of the columns.
The problem is that when he selects a manufacturer, at the bottom left corner of the screen it shows the number of records, which at the moment will be something like "6 of 65211".
The actual sheet only has a few hundred rows (not 65211). So how do I delete all the blank rows beneath my data using a macro or vba code?
As an extra point, I'd like to use column B to check for blank rows (not column A).
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
My workbook contains 13 tabs - 1,2,3,...12, and Summary
My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.
Rows used on all 13 sheet are as follows: A - contains facility names B - contains a two or three letter code C - contains hours D - contains dollars E - contains adjusted rate
On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:
=IF($A5=""," ",SUMPRODUCT(--('1:12'!A$4:$A$50=$A5),--('1:12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50)) I did not put the  excel added that automatically I had 1:12
=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50))) I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....