I have a worksheet ("ALL JOBS") with huge row data and the row data will vary every day. My problem is there will be a lot of blank cells which I need to fill manually and its tacking lot of time of mine.
Code to fill these blank cells automatically with some specific texts based on the attached conditions.
I have attached the workbook for more details. FillCellsTest.xlsm‎
I have this excel file with 5 columns on it and one of the columns is dependent on the four columns. I just want to automatically fill out the 5th column (Completed, In-progress and not yet started) based on the conditions set on the four columns. Although, the four columns have many conditions, it has been categorized with 3 colors. If all of the 4 columns are GREEN, 5th column will show Completed, If all of it are orange- Not yet started and if one of the columns had different color 5th column will reflect -In progress.
View 1 Replies View RelatedI want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
I want to color the cells for some specific texts in RED, and some in BLUE and some in GREEN.
For Eg: I want to color the cells in RED, which contains below specific texts in a sheet.
UNIX
LINUX
MS OFFICE
POWER POINT....like this for nearly 100 specific texts.
and I want to color the cells in BLUE, which contains below texts in a sheet.
JAVA
.NET
SQL
MSDOS....like this for nearly 100 more specific texts.
If i create a rule in conditional formatting for each text,I have to create nearly 400+ rules for my task now, which is not possible.
I'm trying to remove cells that contain certain suffixs. Here is the code I'm trying to use:
Code:
For i = 7 To 2000
If Cells(i, 7) = "IV," Or Cells(i, 7) = "Jr," Or Cells(i, 7) = "III,"
Then Cells(i, 7).DELETE Shift:=xlToLeftEnd IfNext i
but it does absolutely nothing. I've used this for similar macros in the past and it worked just fine.
I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.
I am trying to count the number of unique entries in a sheet, that also satisfy 2 other conditions.
I've attached an example sheet : Example email report.xlsx
The result I need is: The number of unique values in column E, that also have NULL in column G and NULL in column I.
So, in the example, the result would be 7.
I know I can do this by conditional formatting and filtering, but would prefer a formula, and perhaps also a macro that I could apply as the number of rows in each sheet is up to 20000, and each month's sheet will be a different size.
A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
When I enter barcode X in cell A1, I want B1 to say supplier and C1 to say product name and D1 to say package quantaty etc.
And if I enter barcode Y in cell A2, I want B2 to say different supplier, and so on, hopefully you get the picture.
refer to attached worksheet.
I need a way (Non-Macro please) - where if a condition is met, then fill a range with a particular value. The attached spreadsheet has a sample with explanation.
I'm trying to populate a dropdown Combo Box by using conditions.
In the example I attached...I would be trying to use ComboBox1.ListFillRange to populate the ComboBox only with players who have "C" in the Position column and "ANA" in the Team Code Column. Which would give me all the Catchers on the Angels.
I've been trying to use worksheetfuntion.Index.
I would like to write a macro that would count observations from a database extract based on specific conditions and generate a report.
My database extract looks like this :
Client name
Info1
Info2
Info3
Bob
aaa
aaa
aaa
[Code] ....
I would like to have an efficient and simple VBA code to count the observations. Something that would store the result of query like those:
# 'client name' = Bob : 2
# 'client name' = Bob AND info1 = aaa : 1
# Info3 = bbb : 2
# 'client name' = Bob and Info1 = aaa OR Info1 = bbb : 2
I am aware of DCOUNT function, but I am not too sure how to translate it in VBA. I also think that using autofilter and counting the visible rows may be subject to bugs.
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I am trying to work with conditional formatting to turn a field a specific color based on two conditions, one of which is variable. The first condition is a list of ongoing events (which can change) and the second condition is a set of known milestones. I want to create a control (check boxes?) that will turn a given field (which has dates in it from another calculation) to either Red, Yellow, or Green.
I was thinking two Dropdown boxes - one for the events and one for the milestones. The user would choose an event, choose the milestone, then choose a checkbox or something to change the color of a field elsewhere in the spreadsheet. Right now, I'm doing this in a very clumsy way by having three checkboxes for each milestone for each event. There are five milestones per event (so 15 checkboxes per event on Sheet2). I will likely have 70+ events so I was hoping for a better way to do this. I've done this for the first three events and need a more efficient way of doing this.
See the attachment : Event Milestones based on Go Date Uploadable.xlsx‎
i would like to be able to fill color numerous rows of cells that have a number in one of the columns that is either above a certain number or below a certain number.
example 3-Nov 5 H
5-Nov -3 V
6-Nov 4 V
9-Nov 12 V
10-Nov -1 H
in this example i want to fill color any row that in column 2 has a number less than -1 and greater than 4.
I am trying to create a spreadsheet to record vehicle mileage at the end of each week, however sometimes we cannot input the information until 2 or 3 weeks later. I am looking for a way to auto fill specific cells when the user inputs the information using a userform. On the attached spreadsheet:
The first button input an 'Empty Row' ready for the new week and current mileage. The second button opens the userform to select the vehicle, date and input the mileage. I cannot figure out how to have the mileage inserted into the correct cell irrespective of when we insert the information.
If I have cells in my worksheet filled with yellow color, is it possible to count them based only on this criterion (fill color). They might or might not be in the same column.
View 4 Replies View RelatedI have a spreadsheet which is linked to several other worksheets. I have managed to include formulas to count how many cells have numbers between 101 and 5000 by using this formula -
=sum((h2:h500>=101)*(h2:h500<=5000))
but now I want to count the number of cells in another worksheet that are equal to or less than zero. When I use the same formula as above it counts all the blank cells. I have tried using a countblank formula and then deducting this from the result, but unless the other worksheet is open the countblank formula does not work.
I have a lookup table in which names of students and the planned session dates are available.
I need to create a chart that has Student Name and Each date of month. The chart should have value of 1 wherever a match is found in the look up table.
I am wondering if combination of searching for multiple strings (student name and date ) will work somehow. The below image explains my problem
StudentTimeTable.png
I have column A with Different status like Open, closed, available etc. Column B have numbers. i am looking for a formula in condition formatting for column B.
If the cell value in column B is 2 or more, the same cell should be highlighted in Green.
If the cell value in column B is 1, the same cell should be highlighted in Yellow.
If the cell value in column B is 0, the same cell should be highlighted in Amber.
If the cell value in column B is less than 0, the same cell should be highlighted in Red.
If the cell value in column A is "Available", cell in column B should be highlighted in Amber.
I am trying to sum numbers based on three counditions.
My problem the third condition needs to use a wild card. I have attached a sample file, in the last condition I am only wanting to sum numbers where the characters in the last column begins with bd*
The yellow cell contains the formula I am using.
I am creating a document log that tracks all excel files sent and received.
I use RDBmerge to get the filenames and data from the file batches.
My current macro edits the data down to the last stage of data needed to create the log.
My example workbook shows the final stage of the RDBMerge Data "Rough_Data" and then the final data formatted needed for the Log "Final_Data"
Included on the "Rough_Data" worksheet is the Code log used to complete the "Final_Data" worksheet.
I have highlight the cell range on the "Final_Data" Sheet that I need to complete.
filenames can occur multiple times from the RDBmerge, so only one occurance of the filename is place in column B of the "Final_Data" worksheet.
The criteria is this:
A column on the "Final_Data" worksheet as been Named for Each of the possible "Record Types" from Column G of the "Rough_Data" Worksheet. ("A,B,C,D,E,I,O,P,Q,T,V,W,X,Y")
I then must look through the "Rough_Data" worksheet for the first occurrence (if any) of that record type for each filename on the "Final_Data worksheet. If an occurrence is found I then must look at the "Unique ID" & "Program" Columns of the "Rough_Data" Worksheet. The key (on the "Rough_Data" worksheet) is used to determine the code that is written to the corresponding cell.
i.e.
"Final_Data"Date
FileName
Field2
User
Direction
Method
[Code] .....
I would very much like to automate this process, as sometimes I am dealing with over a hundred files with 30 plus rows of data each.
I have been trying to search an array and cannot find the correct combination of functions to get the information I want. I might need a macro to do this but I will try anything. Here is an example:
1 A 1
1 B 2
2 A 3
2 B 4
3 A 5
3 B 6
I want to search for 3 and A and return the value in the 3rd column. I have tried several functions but cant figure out how to make sure I get the correct value in the 2nd column that corresponds to the value in the 1st column.
I need to create a macro that will calculate a value based on the contents of multiple cells. Looking at the example attached, if columns A and/or B (employee ID and name) are empty, then allowable OT (G) should be 0. If either have data, then if Stage (F) is CAN, G should be 20. If Stage is FAS or FAR, G should be 10.
I'm not very savvy with IF statements, which is how I imagine this can be done, and I don't know if this would be easier to do as a macro or as a formula within G. Since the contents of the of the cells will be changing on a weekly basis, I'd prefer the formula to only be there if there is content on the line, so we don't have nulls showing.
Im currently trying to report on cycle times for a certain task that is carried out on a daily basis. I have used NETWORKDAYS to calc each rows cycle time in Cell R14:R512 the code is:-
=IF((NETWORKDAYS(O14,N14)-1)*($AH$11-$AH$10)+IF(NETWORKDAYS(N14,N14),MEDIAN(MOD(N14,1),$AH$11,$AH$10),$AH$11)-MEDIAN(NETWORKDAYS(O14,O14)*MOD(O14,1),$AH$11,$AH$10)=0,"",(NETWORKDAYS(O14,N14)-1)*($AH$11-$AH$10)+IF(NETWORKDAYS(N14,N14),MEDIAN(MOD(N14,1),$AH$11,$AH$10),$AH$11)-MEDIAN(NETWORKDAYS(O14,O14)*MOD(O14,1),$AH$11,$AH$10))
This is returning the cycle time providing both the start date/time and end date/time are filled in, or it returns blank if nothing has been filled in. I have then tried to calc the average overall cycle time in Cell R12 by using the below formula = SUM(R14:R513) / (COUNT(R14:R513) - COUNTIF(R14:R513,0))
This seems to be working proved i have two rows of data filled in. My problem lies when all the cells are blank, it then returns the DIV error. I have tried using an if statement to ignore if the cell is blank but it still returns the DIV error. Im really at a loss on this and now im not even sure if i have gone about this in the right way or if there is a better way to approach the whole task? I have attached a sample workbook to try and better explain.
I have two texts in two cells. e.g in A1 I have JOHN, and in B1 I have SMITH.
I need to cocatenate these two texts in a third cell (=CONCATENATE(A1, B1) /or I can use = A1 & " " & B1). It's fine till I concatenate.
But I need the output in the following format:
JOHN SMITH
The second text needs to be in ITALICS.
Flagging Duplicates based on Multiple conditions..
I have attached the file for reference with Dummy Data as the actual data runs in thousands...
What I require is to flag Duplicates with some formula so that I can filter and then later delete those specific rows from the records...
The Duplications has to be considered on Multiple criterions:
1. If the FNAme and LName is appearing for one Company more than once.
2. Sometimes there would be inconsistency in Data Entry, so the FNAme would be typed in the Column for LName and vice-versa.The code needs to understand the same.
3. Alongwith the above, if the Designation is different then the record with the Lower Designation based on the Weightage should be Flagged as "Duplicate".
Ex: -
4. If there's a tie between the same designation then the record with the Maximum information across all the columns having Max info should be Unique.
Ex:- The amount of details mentioned in the following columns would determine the record to be termed as Duplicate or unique
5. If still the records are identical then the first occurence can be unique...
I have made this data to give an example as the actual data is very confidential.
Please allow room for adding New Designations as the Designation and their Weightage needs to be Dynamic.
Please refere the Word doc Duplication Criterion Explanation for the explanation.
I am looking for a solution other than using an advanced data filter for unique records only.
I would like to take a large list (columns A:D), and automatically filter for unique records and other conditions and paste the results in different tables (Group A & Group B).
Group A only includes records with value ="A" in the checksheet column.
Group B includes records with value <>"A" in the checksheet column.
Does anyone have any ideas how to do this so that when I paste the large list in columns A:D, the other tables (Group A & Group B) are automatically populated?
SEE ATTACHED:
I am trying to get a list which counts info based on multiple conditions but I can find no way round this one point
I have a sheet which has all the games played in a particular division and the time that each goal was scored and I am trying to break down the following
What I want is a list that has a column that has the result of how many times when team A were playing at home was a goal scored between the 45th and 65th minute
column A = Home Team
B=Away Team
C= Time of First goal
D=Time of Second goal
E=Time of Third etc
I have a countifs in place for counting the home team and counting if the first goal was scored in under 10 minutes (this is simple as obviously all the first goals are in column C) but what I want to do is be able to have a count of how many times a goal was scored between x number of minutes eg between 40-50.
My problem comes when trying to count the goal times as some matches will have no goals and the cells will be blank and others will have multiple cells filled and the figure I want could be in any column and I also only want it to count only the amount of games a goal was scored between those times so if a game had 3 goals scored in between that time I only want it to count 1.
The sheet has a lot more columns but this is the main sticking point.
I want to populate separate tabs from data in a master table based upon multiple conditions shown in the separate tabs. Each tab is a summary of a particular engineer's shifts over multiple weeks and their results on various projects. Each summary tab has the engineer's name and the number of the week (the two conditions). Example: On Aaron's tab, I want to show a summary of Aaron's work and his results over a period of several months, as well as who is working the other shift on that day for those projects. So I need to get the following information for Aaron's tab from the master table:
Week 1, Aaron is working the morning shift and Zeb is working the afternoon shift,
Week 2, Bill is working the morning shift and Aaron is working the afternoon shift
Week 3, Aaron is working the morning shift and John is working the afternoon shift
etc etc
I also need to know how much work each engineer pairing has achieved in a particular week on a particular project. The engineer working in each shift may vary from week to week, as will their results. There is no formula for when a particular engineer will be working either morning or afternoon or whom they will be working with.