I am trying to band columns together in two's and this formula works except for I need the banding to start with column B.
=MOD(INT((COLUMN()-1)/2)+1,2)
Example:
Column A - no banding
Column B and C - banded
Column D and E - no banding
Column F and B - banded
etc.,
Is there another solution to this without maybe adding a helper row below the data with 0 0 1 1 0 0 1 1 0 0 and do the conditional formatting based off of the helper row?
I know that if I select say A1:C100 on a spreadsheet, I can color alternating rows using conditional formatting and the formula =MOD( COUNTA($A$1:$A1),2). I am using COUNTA -- rather than simply ROW() -- so that I am only considering visible rows. I am trying to write a VBA subroutine that takes in an arbitrary range and colors in every other row of that range. Something like:
Sub FormatRange(ByRef theRange As Range, ByVal theColor As Integer)
theRange.FormatConditions.Delete
theRange.FormatConditions.Add Type:=xlExpression, Formula1:= "=MOD(COUNTA($A$1:$A1),2)"
theRange.FormatConditions(1).Interior.ColorIndex = theColor
End Sub
However I want to make the argument to COUNTA refer to the first column in theRange, not necessarily column A in the spreadsheet.
I used the method described here:
[url]
The problem is that it seems only to work on the computer on which I made the sheet. This should mean that it is somehow dependent on some local settings. Does anybody know what settings, or whether it is something else that may be the cause?
i am having problems with the conditional formating function.
to make document i am working on for office a lot more clear i was hopeing to do some row banding. i think you can get some basic row banding in auto format but i was hoping to do it myself.
when i go to conditional formating - i change the tab to Formula is: ...
We have a customer rebate in place with various levels of refund based on the quantity purchased during the year. I have used a sumproduct formula to calculate this before.
The customer used to have the following set up -
0-999 - £1.00 per unit rebate.
1000-1999 - £2.00 per unit rebate.
2000-2999 - £3.00 per unit rebate.
So if they bought 2501 units they would get a rebate of (1000*1)+(1000*2)+(501*3). However the customer has trigger points so rather than the above it is now -
0-999 - £1.00 per unit rebate.
1000-1999 - £2.00 per unit rebate.
2000-2999 - £4.00 per unit rebate if 2500 bought.
So now it would look like this - (1000*1)+(1000*2)+(501*4). However if they only bought 2499 units it would be (1000*1)+(1000*2)+(499*2).
1. By entering a numerical value in Cell A1 for example typing 5.
2. Then, next five columns would be blocked with specific color.
3. if i am typing 10, then 10 columns would be blocked with specific color.
For obvious reasons, the conditional formatting to shade alternate rows doesn't work when filtered. So I think I need another way of doing it. Luckily, my table is fairly static, rows aren't added or removed. The first column is excluded from the banding. As is the first and last row with data (1 & 67) respectively. I found a relevant thread here, but the code is beyond my understanding.
View 3 Replies View Relatedhow to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm using Win 8.1, Office 2013.
I have two sets of columns in this chart, and two lines on a secondary Y axis. But the first set of columns have their colors reversed. How do I fix this?
Screenshots below: [URL].....
[URL]....
I am trying to color code the cubes in my chart. I'd like to be able to be able to specify a specific color per cube. What code what I write for the Sheet to do this?
View 5 Replies View RelatedI have a macro that changes the color on a row, but depending on which cell I am in different columns arwe changing color. What I want is that if I make a change in row 1 want the color in A1:L1 to change and if i change row 2 i want A2:L2 to change, so alwaws the columns A to L in respective row. My macro
Sub Markera_Ny()
Dim intRadnr As Integer
Dim intStartrad As Integer
Dim intSlutrad As Integer
Dim Box As Integer
Dim Rad As Integer
intRadnr = ActiveCell.Row
intStartrad = ActiveSheet.Range("First").Row
intSlutrad = ActiveSheet.Range("Last").Row
If intRadnr < intStartrad Or intRadnr >= intSlutrad Then
MsgBox "Macro can only be executed in rows 21 to 1000"
Exit Sub
End If....................
I have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
View 4 Replies View RelatedI want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 Replies View RelatedI have one column of data which I need to split into two. Those values that are bold need to migrate to column B. Have some difficulty in phrasing the question properly.
Original:
A
10
0
0
2
4
Desired output:
A B
0 10
2 0
0 0
2 0
0 4
* note a few formatting issues here:
1. instead of bold and not bold, they are in green or in purple
2. 0 stands for an empty cell in my data set (I tried to fill the empty cells with zeros, but they somehow inherit the colors, i.e. some zeros are green and some zeros are purple; guess that wouldn't be a problem since the desired output they'll all be zeros anyway?)
The following code filters my sheet to show only values less than 0 in column T, (column 20).
View 5 Replies View RelatedAs seen below, I'm looking for a vba code to highlight color on every Friday and through columns 1, 4, 6,9,11,14,16,19,21 upto columns 28 i.e. AH
Excel 2010ABCDEFGHIJKLMN1DateQty1Qty2TotalDateQty1Qty2TotalDateQty1Qty2Total
21-Aug-124559289374521-Aug-122721298357041-Aug-1222792338461732-Aug-121161244636072-Aug-12347918036592-
Aug-1225723358593043-Aug-12128088221623-Aug-124369158259513-Aug-1227723299607154-Aug-124096192960254-
Aug-124679386585444-Aug-122081870295165-Aug-12333751838555-Aug-124270357278425-Aug-1231793455663476-
Aug-122061336654276-Aug-1241466142076-Aug-123761939231587-Aug-123757375975167-Aug-12212203622487-
[Code] .........
how to format a row based on text that is in a certain column. For instance, if a cell in column B has text in it I need to format the entire rest of the row with a certain background color and text color. I've been searching around here for a while and I think I'm really close, but I just can't seem to nail it down. Here's the code that I've worked on so far.
Sub Reformat()
Dim SrchRng3
Dim c3 As Range
Set SrchRng3 = ActiveSheet.Range("B1", ActiveSheet.Range("B65536").End(xlUp))
Set c3 = SrchRng3.Find("Europe - *", LookIn:=xlValues)
Do
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I have a simple spreadsheet. A column for a persons name and 31 columns, one for each day of the month. I want to apply conditional formatting, either fill color or border color, to the date column of the current date when the spreadsheet is opened.
View 2 Replies View RelatedI was handed a pdf of some leads by a co-worker. Finally, I got the data into excel but it's in a pretty useless format... 30,000 rows of contact info with no rhyme or reason. I want to upload this into our CRM, but I need to get all the different bits of info into separate columns. I'm no excel pro, but I managed to use an Excel plugin called ASAP tools to bring some order to this chaos... All names have a blue cell color, all titles have a green cell color, work phone is red, and so on.
Does anyone know a way that I can sort these into separate columns? I've trying playing with the Filter function, but it hides rows which makes the output useless for my purposes.
I want to show 8 members of staff's names, with their sales closing percentages. I want then to produce a chart showing their percentages as a column with a line showing 16% going across the chart showing who is above and who is below the target.
Ideally i would also like to change the colour of the columns or background of those below the line to show who is under target.
Is it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
For example if the
Column 1 (Previous Version) :The structure contains Wire, Bolt, Stmaps etc
Column 2 (Current Version) : The structure contains Wire, Bolt, Stamps etc
Data Changed: YES
In report is should show two columns side by side and in Column 2 it should highlight "Stamps"
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedI am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View Relatedhow I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View Related