Combobox Match Entry Property
Nov 29, 2007
I have a ComboBox (cmbJobNo) in excel which lists a series of numbers. By using the code below other TextBoxes are automatically filled with related text once the ComboBox number is selected.
On typing a number in the ComboBox the number is predicted, which is great except when a number is not sequential. Say the number is 15304 (the next number in list is 15315), when 1530 is entered, 15304 is predicted and VBA jumps to the next data entry Textbox, the data entry person then enters 4 (they type a lot faster than me, without looking), which is incorrect for that box.
VBA does not allow the complete number to be entered. If I turn off MatchEntry the other related textboxes txtClient and txtProject) do not automatically update when number is entered.
What can I do to allow complete number to be entered and related Textboxes updated after number entry?
Private Sub cmbJobNo_Change()
If cmbJobNo.ListIndex > -1 Then
txtClient = Format( Range("Jobs").Cells(cmbJobNo.ListIndex + 1, 2), "0") ...............
View 9 Replies
ADVERTISEMENT
Oct 18, 2006
I have searched the forum but can't find an answer to my problem. I have a list of about 3000 streets, a sample of which follows:
ARBROATH ST
ARCOLA ST
ARGO PL
ARIES PL
ARMSTRONG AVE
ARTHUR AVE
ARVIN CT
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE...................
I know how to populate a List Box, but rather than having to scroll through the entire lot I would like to just have to type in a few letters and the output only display streets that start with only those letters. For example, if I type in AS only the following appear in the listbox.
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE........................
View 2 Replies
View Related
Jun 9, 2006
I have a form with several combo boxes, and they function just the way I like as far as being able to pick from the list, or typing in them and having it show you the next available item in the list as you add letters. Whats happening that I would like to know how to deal with is... as soon as you type a letter that is not in my lookup range it generates an error. "Could not get the list property - Invalid property array index". I don't want people to be able to add to the list, but I would like a msgbox to pop up. Then allow them to go back to the box and try again.
View 2 Replies
View Related
Mar 11, 2007
I have several comboboxes on a userform that work fine as long as I use a whole number, but if I try to use a number with a decimal, I get a run time error 'invalid property'. what I'm doing wrong or if I have to change a property value in the combobox?
View 9 Replies
View Related
Jul 3, 2008
I am trying to get a combo box to work, but keep encountering the error "Invalid Property Value."
When the combobox entry is deleted and the user moves to the next text box in the userform, this error pops up which is very annoying. It also pops up when the word entered doesn't match, like it is supposed to.
I have MatchRequired set to True, because I want an error message to come up, but with my own error message like " That name doesn't exist, please try again ".
I can't figure out a way to ignore the "Invalid Property Value." error message, and show my own customized message.
View 11 Replies
View Related
Jul 29, 2013
I'm trying to create a userform with a combobox wherein items that will be provided in it will be based on the worksheet named NA. When i try to change the Rowsource on the properties of the combobox i'm getting an error "could not set the rowsource property. Invalid property value". Do I need to declare the name of the worksheet before changing the rowsource?
View 6 Replies
View Related
Jul 30, 2013
Here is my code:
Code:
Private Sub ComboBox1_Change()
ActiveSheet.Rows("3:62").Hidden = False
Range("D1").Value = ComboBox1.Text
End Sub
I get a runtime error '1004' when I make my combo box selection. I don't have any security or password protection type stuff. The combo box is part of a more complicated spreadsheet and I don't want to switch to a data validation type drop down and I really want it to be activeX.
View 4 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Dec 7, 2009
Unable to get the Match property of the worksheetfunction class? Here is my code
View 5 Replies
View Related
Mar 24, 2007
I'm trying to find the occurence of a date in a range.
Here is the code I'm using:
Windows(todaydate1).Activate
For Each cell In range(Cells(top73, 3), Cells(bot73, 3))
z3 = DateSerial(Year(cell), Month(cell), Day(cell))
Windows("Cash Flow " & todaydate & " PM.xls").Activate
Sheets("Commitments").Activate
However the code stops right on the q3 line where the match function is located. The problem is that I'm getting a Run Time Error 1004:
"Unable to get the match property of the worksheet function class"
This would lead me to believe that the match function is not working. However, in Excel, it does work. Even when using the cell from the other Workbook, it works.
All the dates which appear to be dates are indeed formatted as dates.
The range is good. I've used the immediate window to verify the address and the values of the other variables in play.
?range(Cells(toprw, 2), Cells(botrw, 2)).Address
$B$26:$B$49
Since the correct workbook and sheet is activated, I'm really at a loss here. Below is what the sheet looks like:
View 9 Replies
View Related
Aug 23, 2006
I have problems with updating my ComboBox (old entires remain and keep adding up)- I have built my application from posts on this site
Private Sub Worksheet_Activate()
Dim i As Integer
Sheets("DiagramAnk").ComboBox1.Clear
For i = 3 To 18
Sheets("DiagramAnk").ComboBox1.AddItem Sheets("DiagramAnk"). Cells(1, i).Text
Next
Sheets("DiagramAnk").ComboBox1.ListIndex = 0
End Sub
The code works if I remove the lines .Clear and .ListIndex=0
The list opions runs as Case in ComboBox1_Change()
View 9 Replies
View Related
Oct 11, 2006
I have a user form that has a combobox, two textboxes, and a button on it. When the form is loaded, the combobox fills with data from a worksheet I created. THe worksheet has a column with the item names, and another column with the quanity of each item. The combobox is filled with the item names. SO far I have this done. My issue is that when the user selects an item from the combobox, and enters a quantity in to the first textbox, and then clicks the button, I want the quantity in the textbox to add to the quantity cell that the part number from the combobox references to. Then I want this new quantity to show in the cell and the second textbox.
View 3 Replies
View Related
Mar 29, 2007
I would like to use a combobox and I want to force the user to selected one item from the list, and not to be able to type anything in it.
My other solution would be to use a listbox but I like the combobox design better...
I found this code in a MSDN Forum but somehow, it does not seem to work.
Maybe it is because I do not know what to do with a "public class", or my Excel 97 does not support this.
I tried pasting the "private sub" in a sheet code (where my combobox is), but it did not work.
Public Class Form1
Private Sub ComboBox1_KeyPress(ByVal sender As System.Object, _
ByVal e As System.Windows.Forms.KeyPressEventArgs) _
Handles ComboBox1.KeyPress
e.Handled = True
End Sub
Is this code actually working under excel 97 and if so, where do I have to put it?
View 3 Replies
View Related
Jun 30, 2008
I am using Control Tool box combobox in worksheet.How to change the Combobox to Non Editable combobox?
View 3 Replies
View Related
Feb 4, 2014
I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.
[Code] ....
I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.
Attached File : Copy of Referal Tracker.xlsm‎
View 3 Replies
View Related
Apr 6, 2014
I am trying to find out whether you can restrict the rest of the userform from being available, unless a certain field is entered.
I have a tax invoice userform, I want to restrict the user from entering any other data unless they have selected a customer.
There are other fields such as Customer Address, Customer Number, Disc% and Terms that populate through vlookup code once the customer is selected, so still need that to work once the customer is selected. I just don't want them to be able to enter any other data on the userform without the customer being selected.
I wasn't sure whether I needed to enter code into every other textbox or combo box that if cboCustomer = "" then pop up an error message, but that would require a lot of code to be entered. I have 30 comboboxes and 53 Textboxes that I want to restrict to not being available unless a customer is selected from combobox.
View 4 Replies
View Related
Apr 25, 2013
I have 4 columns, If column B (Ref No) is filled in, the adjacent columns, C,D and E become mandatory and an input box pops up on screen one after the other for entry into each column.
My problem is that I require a drop down list and not a input box for the final column (status). So i have created a userform with a combobox dropdown. I am having problems connecting the combobox selection to the final column, and for the selected combobox item to go into the right cell like the input box entry currently does.
Attachment 53209test743.xls
I have attached a sheet and also you can see the code below.
Code in Sheet
VB:
Public SaveVal1
Public SaveVal2
Public SaveVal3
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
[Code] .....
View 3 Replies
View Related
Jun 18, 2014
I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
View 7 Replies
View Related
Mar 15, 2007
I have a combo box with match entry = 1, Is it possible to select an item from the list when I start typing parts of the item. I have a large list and don’t always know the beginning characters. Example, I type foq and in the combo box it goes to Ets.Foquet. I have already tried typing a * and so on. Before, *foq, #foq
View 5 Replies
View Related
Feb 9, 2010
I want to be able to look up and match several values in my worksheet to confirm, that an entry is valid. I would like the test to return an OK / NOT_OK value at the end of each entry. In the attached file you will find four different variables. In order to include an entry, it must be matched to find related entries, before it can be included.
For an entry to be OK, it must contain a company that has been listed in the same industry, in four different quarters (not necessarily in the same year). A company can be listed in several industries, but as long as there are not four entries in the same industry in four different quarters, the entries are not yet OK (hence NOT_OK). Therefore the only entries that are valid in the attached file are:
Company A Q1 2009 Administration OK
Company A Q2 2009 Administration OK
Company A Q3 2009 Administration OK
Company A Q4 2009 Administration OK
I work in XL 2007, but have converted the attachment to 2003 for maximum compatibility.
View 3 Replies
View Related
Aug 20, 2007
I have managed to set up a dynamic range called "Managers" which is held in a worksheet named "Lists" to validate entries in Col D of a worksheet named "PartTimeStaff" -
I also have 2 userforms which either add or delete managers names from the dynamic range, this all works well.
What I need to do when using the Delete form is to check that the managers name is not selected in any cell of Col D in the "PartTimeStaff" worksheet - this is to ensure the user has reassigned the records to another manager before deleting selected manager on ListBox1within this form.
The code which runs from a command button is below
Private Sub cmbDelete_Click()
Dim i As Integer
Dim SelectionsIndex() As String
Dim ArraySize As Integer
Dim RowToDelete As String
Application.ScreenUpdating = False
With Sheet2
.Visible = True
.Activate
End With
Set ManagerStartRng = Range("A3")
Application.EnableEvents = False
If MsgBox("Are you sure you want to delete this manager?" & vbCr & vbCr & _
"This action cannot be undone!", vbQuestion + vbYesNoCancel, "Confirm Delete") = vbYes Then
View 10 Replies
View Related
Aug 27, 2009
I am trying to match some strings, to see if an entry is already included in a master list or not. I'm running into problems with some cells that have the EXACT same string, from what I can tell (a text ticker symbol) yet a MATCH or VLOOKUP won't return anything. Has anyone ever encountered anything like this? Worksheet attached with an example
View 3 Replies
View Related
Jul 11, 2013
Im trying to cross match two cells from two combobox's,
Allong the top there are test names, and down the side is staff names,
On a user form there are two combobox's one with staff names the other test names
Untitled.jpg
How can i make it increase the number in a cell where the name and test match the combobox's value
I have Attached an example file,
View 2 Replies
View Related
Jul 25, 2013
I've got a small project to build a small cashflow report... Here is my sheet looks like...
A
B
C
D
E
F
G
H
1
Name
Jan
Feb
Mar
Apr
May
Jun
Jul
2
qwe
10000
20000
[Code] ...........
I've created a userform that looks like this :
I need the amount entered to be inserted based on the name combo box and month picked...
So in a simple words, after i pick "uio" in name combobox and pick "Jul" from month combobox, the amount that i pick from amount combobox will be entered in cell H4...
I've tried several ways to return value and using search function and match the data, but its only for row, not both row and column... Is there any way to achieve this?
View 8 Replies
View Related
May 10, 2007
I have 3 sets of table in a sheet, namely, BK,DC & BDM. Each of the table to shows the result (extracted from other sheets) for 12months and the rating that correspondence with the result. There is also 2 combobox and a commandbutton at the bottom of the sheet. The combobox1 is to select the item (BK,DC or BDM) and combobox2 is to select the month. This is because i need to create something whereby, once the item and month is selected, then the user is able to click on the commandbutton and a small window will appear to indicate the year to date result (extracted from the tables)
For example, if the user select BK in combobox1 and April in combobox2, then when they click on the commandbutton, the following happens: -
1. Calculate the average percentage of the performance from Jan - Apr (I'm using the Excel formula for step 1 & 2)
2. Generate Rating
3. Populate the result in a small pop-up window which has the header as per what is selected in combobox1.
View 5 Replies
View Related
Jul 16, 2012
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
View 2 Replies
View Related
Apr 14, 2007
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
View 2 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Sep 11, 2013
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
View 3 Replies
View Related
Mar 14, 2014
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies
View Related
