Im trying to cross match two cells from two combobox's,
Allong the top there are test names, and down the side is staff names,
On a user form there are two combobox's one with staff names the other test names
Untitled.jpg
How can i make it increase the number in a cell where the name and test match the combobox's value
I have Attached an example file,
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies View RelatedI have two sets of data and each set consists of two columns as in the example. The first column is the X value and the second set is the Y value. The X values of each set are similar but not the same. I need to multiply the Y values of the two sets with same X value.
I am trying to create a project on excel in which there exists four worksheets. I deleted "class 2-4" due to file size but are very similar. My question here is i need a macro to located the number from the "current" column in the Manual Input section in the "Main Page" worksheet. The current number must match column A into the appropriate sheet (depending on class) and then look for the volume in row 5 and then round up to the nearest number. My goal is to input the "proposed" number into the appropriate column and row. This will be done for four different classes. My goal is to develop this table so that i can look for trends.
Eventaully i would like to concatenate multiple proposed values for each cell as the macro will need to add onto what is located in the cell should the value already exist. Code must be a module so it runs when ever data is entered in the current, proposed, and volume cells in the manual input.
sheet 2
column C is list of chemicals (to give context)
column A is a list of the publication numbers they apear in
column B is GOING to be the list of publication titles they are in
sheet 3
column A is a complete list of every publication number in our library
column B is the corresponding publication title
what i would like to do is extract the title from sheet 3 and input it into column B sheet 2 corresponding to whatever pub number is listed in column A of sheet 2
the code i have so far is in column b sheet 2 "=INDEX(Sheet3!B:B,MATCH(A2,Sheet3!A:A,0))"
now the problem i have is this works perfectly when only one pub is listed in a cell in column A sheet 2 but when there is more than one pub listed (ie "pub number" next line in cell "another pub number") it gives a N/A result.
is there anyway to call up multiple pub titles from the multiple pub numbers within one cell
Sub Moveit2()
Dim Quantity As Range
Dim Cell As Range
Dim Cell2
Dim Breaks As Range
Set Quantity = Range("a2", "a21")
Set Breaks = Range("g1", "s1")
For Each Cell In Quantity
For Each Cell2 In Breaks
If Cell2 = Cell Then
Intersect(Cell2.EntireColumn, Cell.EntireRow) = Cell.Offset(0, 1)
End If
Next Cell2
Next Cell
End Sub
I have this macro to move things to the right. Sort of like a vlookup in a way. However, it runs using one range @ a time. For example it will look up the quantity in A2 versus what's in Row 1 and if they match, data from B2 would be moved into correct column. However, I'd like to run for multiple columns at the offset so I can don't have to keep changing data in the macro. Like want to run for these ranges at the same time as running the first range.
Set Quantity2 = Range("c2", "c21")..........
I have 2 reports with the same column headings. I want Excel to compare each one on the common OrderID and then just show me the ones that don't match--either one invoice can't be found on the other, or in the cases where they are found, the invoice amounts do not match (IOW create an exception report).
View 2 Replies View RelatedI am running some VBA code that works fine, until I specify a filename that contains embedded blanks. Hopefully, the following code and screen captures will demonstrate what is happening. First the code that opens the files ...
View 8 Replies View RelatedI am trying to drop (paste) in new data in a range in sheet 2 and cross reference a column with a table in sheet three and display all rows of matching instances in sheet 1. Example:
Sheet 3 has
a1 b1
amcdap amber connor
apsdap ashley simpson
sheet 2 has
a1 b1 c1 d1 e1
amcdap 300 400 2:00 9:00
apsdap 500 300 4:00 8:00
capdap 200 300 5:00 9:00
dlsdap 400 300 2:00 8:00
I need to return only rows 1 and 2 to sheet 1. I guess ideally I'd like to drop data in sheet 2, click button.
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I am involved with regional sales and have developed a spreadsheet to track various statistics and information regarding the various cities and clients.
On Sheet1 I have Column A for the city names. Columns B through R are various statistical information (all numerical) associated with that city.
I would like to use Sheet2 to quickly draw that information into a generic "printable" spreadsheet such that I type a city name into Sheet2 A1 and the rest of the cells automatically draw the information for that city into their respective cells.
Looking through other threads I thought that maybe VLOOKUP would be the ticket, but it's only returning a #VALUE! error.
Should I use the 'IF' or 'LOOKUP' functions to fill a cell based on the content of another?
If C2 contains 'Cork' I need D2 to read 'Munster'. Indeed I will need D2 to read 'Munster' for a number of different C2 values.
I'm trying to achieve this. I've been trying vlookup, index and match but can't seem to get anywhere.
I don't mind using a macro if it's easier, but I wouldn't know where to start with that.
I am trying to use WINGDING FOnts on some forms. I am not having full success with them. Sometimes they seem to work, other times not at all, and then sometimes if the code is less that 127. I am programically creating the forms from a worksheet.
The code used to create is as follows:
Sub MakeUserForm()
Dim TempForm As Object
Dim NewButton As MSForms.commandbutton
Dim NewLabel As MSForms.Label
Dim NewTextBox As MSForms.TextBox
Dim NewOptionButton As MSForms.OptionButton
Dim NewCheckBox As MSForms.CheckBox
Dim x As Integer
Dim Line As Integer
Dim MyScript(4) As String
Dim BC As String
'This is to stop screen flashing while creating form
Application.VBE.MainWindow.Visible = False
Set TempForm = ThisWorkbook.VBProject.VBComponents.Add(3)
'Create the User Form
With TempForm..............
I am attempting to cross reference sheets to match up IPs to building names. I have attached an example. Essentially, I am trying to take column E on the TEST sheet and match it to column A on the IPs sheet. Whatever the Building Name (column B, IPs sheet) is, I want that filled into Column G on the TEST sheet. This would be a very labor-intensive process if it cannot be done automatically.
View 3 Replies View RelatedI would like cells to fill themselves in automatically on one sheet, by getting the figure from the cell to the right of them, and seeing where the same figure lies on a different sheet. which ever row this figure lies in will be used to grab a different figure from colum "C" of the same row. This is the figure i would like to be put back on the first sheet.
Im aware that i havent explained this very well but i hope that my attached spread sheet with a couple of notes and highlighted bit will explain it much better.
Thank you very much in advance to anyone who can help me with this!
Jake
I've got a small project to build a small cashflow report... Here is my sheet looks like...
A
B
C
D
E
F
G
H
1
Name
Jan
Feb
Mar
Apr
May
Jun
Jul
2
qwe
10000
20000
[Code] ...........
I've created a userform that looks like this :
I need the amount entered to be inserted based on the name combo box and month picked...
So in a simple words, after i pick "uio" in name combobox and pick "Jul" from month combobox, the amount that i pick from amount combobox will be entered in cell H4...
I've tried several ways to return value and using search function and match the data, but its only for row, not both row and column... Is there any way to achieve this?
I have a ComboBox (cmbJobNo) in excel which lists a series of numbers. By using the code below other TextBoxes are automatically filled with related text once the ComboBox number is selected.
On typing a number in the ComboBox the number is predicted, which is great except when a number is not sequential. Say the number is 15304 (the next number in list is 15315), when 1530 is entered, 15304 is predicted and VBA jumps to the next data entry Textbox, the data entry person then enters 4 (they type a lot faster than me, without looking), which is incorrect for that box.
VBA does not allow the complete number to be entered. If I turn off MatchEntry the other related textboxes txtClient and txtProject) do not automatically update when number is entered.
What can I do to allow complete number to be entered and related Textboxes updated after number entry?
Private Sub cmbJobNo_Change()
If cmbJobNo.ListIndex > -1 Then
txtClient = Format( Range("Jobs").Cells(cmbJobNo.ListIndex + 1, 2), "0") ...............
I have 3 sets of table in a sheet, namely, BK,DC & BDM. Each of the table to shows the result (extracted from other sheets) for 12months and the rating that correspondence with the result. There is also 2 combobox and a commandbutton at the bottom of the sheet. The combobox1 is to select the item (BK,DC or BDM) and combobox2 is to select the month. This is because i need to create something whereby, once the item and month is selected, then the user is able to click on the commandbutton and a small window will appear to indicate the year to date result (extracted from the tables)
For example, if the user select BK in combobox1 and April in combobox2, then when they click on the commandbutton, the following happens: -
1. Calculate the average percentage of the performance from Jan - Apr (I'm using the Excel formula for step 1 & 2)
2. Generate Rating
3. Populate the result in a small pop-up window which has the header as per what is selected in combobox1.
I have searched the forum but can't find an answer to my problem. I have a list of about 3000 streets, a sample of which follows:
ARBROATH ST
ARCOLA ST
ARGO PL
ARIES PL
ARMSTRONG AVE
ARTHUR AVE
ARVIN CT
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE...................
I know how to populate a List Box, but rather than having to scroll through the entire lot I would like to just have to type in a few letters and the output only display streets that start with only those letters. For example, if I type in AS only the following appear in the listbox.
ASHGROVE CR
ASHLEY GROVE CT
ASHWORTH AVE........................
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
I'd like to fill a dropdown combo box with a list that is made up of 2 cells.
example, on sheet ASP we have the title in A1 and the surname in B1, next person in A2 and B2 etc..
Now I have a useform that needs to be filled with a combination of the title and Surname. I can get either or right, but just can not seem to get both combined and listed.
The code I'm using is:
Private Sub UserForm_Initialize()
'Variable declaration
Dim repeat As Integer
'fill ComboBox
For repeat = 1 To Sheets("ASP").Range("B65536").End(xlUp).Row
ComboBox1.AddItem Sheets("ASP").Cells(Wiederholungen, 2)
Next
End Sub
I have a spreadsheet dealing with orders made by customers and the delivery of the items they have ordered.
When I have delivered the items to a customer I need to note down that their order has been delivered. I also need to enter the date on which it has been delivered.
I have created a user form in which I select the order number of that particular order from a combobox and state whether or not it has been delivered, this is either a "yes" or "no" selected from another combobox.
I then have to note the date in a text box on which the items were delivered.
My problem is getting the answer "yes" or "no" and the date to fill in on the worksheet next to the corresponding order number.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have combobox filled with range of two columns , i want somehow to show them both in linked cell , I don't figure it out , by myself using BoundColumn option and it showing first or second column only.
View 4 Replies View RelatedI want to do is a simple list, 2 items, call them "Thing_1" and "Thing_2". I have an equation in a column of cells. The equation is a simple If statement. If the user selects "Thing_1" then the first equation will run, and if "Thing_2" is selected then the second equation will be used. That's it. No more complex than that.
My original questions about how to initialize a ComboBox are cross-posted here: http://www.excelforum.com/excel-prog...ml#post1996135
I am looking for a way to have 1 combo box, but be able to click on any cell in a range and yield an individual results. In this particular case I am tracking maintenance, and what my crew's corrective actions were for each location. As this varies day by day I cannot use HLookup or VLookup. Also, the lists vary, and have over 100 options.
What I would like is to be able to click in the cell, and instead of scrolling through a list of 109 options be able to start typing the action and it to auto populate. This gets tedious when there are often 50+ locations with maintenance calls per night.
Furthermore, keeping the results exact for VLookup that is being used on another sheet.
I've attached a blank sheet. Columns B, E, F, & H each would ideally have their own combo box. I could click on any cell in the column and when I begin typing the option it would autofill to the correct list item.
Their respective List are currently to the right under columns J, L, N, & P with their headers matching the exact name they've been given.
I have successfully used the course booking form as a base for an input form in an accounting workbook that has several pages. (Thanks to Roy and others for the info; the course booking form on [url]is the best explained piece I have found on the net)
What I would like to do is use a range of cells to populate the combobox so that a user can make a choice from the account descriptions (from a sheet named Intro, b63:99) and have the form return the account number (Intro, a63:a99) to the relevant cell elsewhere in the workbook. The user would then have meaningful descriptions rather than numbers to choose from.
My coding for the form thus far is as follows.