how to write the following in a macro. The task is to have the macro compare both the SSN, amount, and date...if they match go to next row. If Mysoft side exists without a match on the OMNI side, then range for that A-D will be cut and moved to Mysoft Only worksheet and the cells below will be moved up....same holds true for the OMNI side.
I have used the merge facility to incoporate all the worksheets into one excel files. As they all have same heading, I have sorted the data, first by their account expiry time (oldest to newest) and then by manager (A-Z)
For example, system report generated on 15/03/2013, 28/03/2013, 03/04/2013, 15/05/2013, 28/05/2013 and so on and these are sheet names too. What I want is one worksheet called report with the same heading as my merged worksheets and return values where Column C in 28/03/2013 is compared to 15/03/2013 and if the employee ID matches than return the whole row of data for the report.
the next query would then be for finding employee ID in 03/04/2013 and comparing it with 28/03/2013 worksheet and returning the matched ID in report worksheet.
This is the layout of the report worksheet.
Display NameEmployee IDAccount StatusE-mailDepartmentManagerComment
15/03/2013 to 28/03/2013
28/03/2013 to 03/04/2013
03/04/2013 to 15/05/2013
15/05/2013 to 28/05/2013
so for the above report worksheet, if employee id matches the two compared worksheet (15/03/2013 to 28/03/2013) return all value (Display name, employee id, account status, email, department, manager, comment) from the 28/03/2013 and so on.
Trying to compare data from two spread sheets, if there is similar data in column a, output all data (sheet1 & 2) to the 3rd sheet.
Sheet1
a b c d
smith john 888 cicero
king larry 123 syracuse
Sheet2
a b c d
smith marge 777 liverpool
king mike 458 dewitt
Sheet3
a b c d a b c d
smith john 888 cicero smith marge 777 liverpool
king larry 123 syracuse king mike 458 dewitt
The closest thing I can find to what I'm trying to accomplish is this link here:
Compare Worksheets
I'm also would like the ability to change the columns I am comparing. The actual sheets may have more that 4 columns.I can somewhat read the formulas but have a hard time under standing them completely.
I am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity()
Dim rng2 As Range, c2 As Range, cfind As Range
Dim x, y
With Worksheets("Imaging_Summary")
'N4=Accession on Imaging Summary worksheet
[Code]....
I have a worksheet with five columns (A, B, C, D and E)
The cells in Column B contain letters and/or numbers (without spaces) in no particular order.
The cells in Column C contain letters and/or numbers (without spaces) in no particular order.
I want to compare all characters in 1st Cell of Column B with all characters in 1st Cell of Column C, and display the matching characters in 1st Cell of Column D, and the character count of 1st Cell in Column D must be displayed in 1st Cell of Column E. note that multiple instances of the same character must not be treated as duplicates. When execution on 1st Row is finished then repeat procedure for Row 2, etc... Stop execution when first empty cell in Column B is located.
Example:
B1 = LJLM12
C1 = KY2MLK
B2 = ZCG4GM
C2 = X4GGGC
B3 = KTCBNG
C3 = GNBTBB
The script/code/formula must output the following:
D1 = LM2
E1 = 3
D2 = CG4G
E2 = 4
D3 = TBNG
E3 = 4
I am using Excel 2003. Y
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
I have a report that has thousands of lines... debits & credits. Most of them offset one another, 0 balance. However, there are still many w/ missing credits that need to be identied. Instead of going thru 10,000+ lines to pull out lines w/o credits - Is there a way that I can cross check the amount between lines (1&2, 2&3, 3&4 etc etc) and if their total is 0 then I want to move them to another sheet (Matched)?
View 6 Replies View RelatedI need to run the same database dump every day and find the differences. Both spreadsheets will have the same column headings, with Column A being the lookup value. Each spreadsheet will have many columns of data. I need to find the differences from Row 1 on spreadsheet A with Row 1 on spreadsheet B.
Example:
Spreadsheet 1, Column A value is 900026. Need to find 900026 in Column A on Spreadsheet 2. Compare all the data in each column to see what has changed. If anything has changed on Spreadsheet, copy the row from Spreadsheet 2 onto a new sheet and 'tag' which data has changed.
Also, again using Column A as the identifier, if there are rows on data on Spreadsheet 1 that do not appear on Spreadsheet 2, copy the entire row onto a new sheet and tag it as "Not on new datadump". And vice versa, is there are rows of data on Spreadsheet 2 that do not appear on Spreadsheet 1, copy the rows of data onta a new sheet and tag it as "Not on old datadump".
A B C D E F
xxx xxxx xxx 123 123
xxx xxxx xxx 123A 123B
xxx xxxx xxx 123B 123C
Is it possible to leave column A, B, C, D untouched and match against column E from column D?
If E matches D then leave in the same row and if E does not match D then move to column F? The identical numbers may be included in the columns, but different rows.
I have a set of transactions from one system which is column D and I have another set of transactions from another system which may or may not have the same transaction from column D. They are all sorted from + to -. I just need to match up cells from column E to column D.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View Relatedwhat I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
2014-07-30_16-52-23.png
Fist I want to compare ColB=ColH, if TRUE, compare colA=colG, if TRUE, again compare colC=colI, IF all this conditions true, then give (colD-colJ) on colL.
all the unmatched rows in 2 tables to populate with different for each table
Move a row of work to resolved tab once column M is changed to resolved This needs to be moved to the first available line on the resolve tab The row that has just been moved from the orginating agents tab needs to be deleted and shifted up When moved to the resolved tab I want it to prepopulate where the row originated from in column N When moved to resolved tab I want it to prepopulate the date it was resolved Also the spreadsheet will be shared
I have attached a test version of the spreadsheet.
I have whats going to be a very large "Input" worksheet that has several headings of columns. One of these columns is "category" as in parts of a vehicle, i.e. steering, wheels, rod-ends and so on. Now what I would like to do, is once I type a new row of information in, to have the filter go through and copy said category row into another worksheet where I can have all of them separated on there own.
Here is a picture of my current spreadsheet. So basically I want to be able once I save the file, that it goes through and where it detects Rear-End in "B18" I would like it to select row 18, copy all of its cells and move them into the worksheet Rear-End
I created a outstanding task worksheet in excel and I would like to move the completed jobs from this sheet to the second worksheet titled 'Completed Tasks'. The first worksheet is called 'Outstanding Tasks'.
I came up with a code to do this (see below). As you can see when I type "Y" into column G it moves the row into the second worksheet. It does this; however it puts it to the bottom of the table on the second worksheet where I would like it to be at the top. I also would like it to delete the row once it has moved it does this but then deletes the other row of information above it leaving blank rows on either side.
I simply want a code that moves the row of information to the second worksheet when I type Y into column G and then delete the row without messing with other information around it.
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("G5:G1000")
If Target.Count > 1 Then Exit Sub
If Intersect(Target, rng) Is Nothing Then Exit Sub
Select Case Target.Text
Case "Y"
Target.EntireRow.Cut Sheets("Completed Tasks").Cells(Rows.Count, "A").End(xlUp).Offset(1)
Selection.ListObject.ListRows(1).Delete
End Select
End Sub
I have a workbook with two worksheets in it. The first "TO DO" and the second "Completed". In "TO DO", I have rows of tasks starting in row 4 (row 3 is my header), going to 200. What I'd like to have happen is when I put a "C" in column C, it moves the entire row to the "Completed" worksheet, greys it out and removes it from the "TO DO" worksheet. Then if I remove the "C" from the "Completed" worksheet, it moves it back to the bottom of the list. I already have a macro to resort it based on "priority" in column E.
View 9 Replies View Relatedi need to get certain info from one worksheet to another is there any way to do this automatically
View 9 Replies View Relatedi have this at the moment:
in a sheet named CURRENT is all our data.
when the jobs done the Satus Column "F" is changed to INVOICE
and then once a day or whenever they are all moved to a new sheet named the month and year, in this case JUN 09 this works fine as it is but at the moment i have to delete the lines myself from where it took the data from in CURRENT or AtoZ then remove them in 1 go.
Simply put, i want the code to remove these lines itself....
I have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies View RelatedI've included bits of my code and some debug output. Whenever I attempt to add a worksheet, either BEFORE or AFTER I get the following ERROR MESSAGE: Method 'Add' of object 'Sheets' Failed. if I use the .add without before and after a worksheet is added. The problem is that it is always added before the active sheet. I need to replace a single sheet in the correct position of possible 10 sheets. I know the names of the sheets and which one I want to replace, but I can't get EXCEL to move sheets, add sheets by position Number or name, without getting the ERROR.
Public xlApp As Excel.Application
Public xlBook As Excel.Workbook
Public xlSheet As Excel.Worksheet
Public xlRange As Excel.Range
.....
Set xlApp = CreateObject("Excel.Application")
Set xlBook = xlApp.Workbooks.Add
....
xlBook.Worksheets.Add After:="Accounts Receivable" *****
?xlsheet.Name
Accounts Receivable
?xlbook.Worksheets.Count
4
?xlbook.Worksheets(4).name
Accounts Receivable
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedWith the above code, is it possible to trasfer all selected charts, on to a new spreadsheet and print them to fit on one page Landscape, no margins?? Or is that stretching it, i tried it but i print them all A4
View 2 Replies View RelatedI have a workbook with multiple sheets. I need to create a macro and associate it with a command button that will cut the row the user has selected and paste it into the last empty row on another sheet in the same workbook, then, go back to the first sheet and delete the empty row.
View 3 Replies View RelatedI need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
In the attached worksheet I am trying to create a range from
C4 to C12 (all the Officer Roles) and move it to Column E same Range
and
G4 to G12 (all the Officer Names) and move it to Column H same Range
I would need to do this for the entire worksheet. i.e. move all the Officer Roles over 2 columns and the Officer Names over 1 column.
I tried to piece meal it together from code I found here, but I am getting a "wend without while" error.