A B C D E F
xxx xxxx xxx 123 123
xxx xxxx xxx 123A 123B
xxx xxxx xxx 123B 123C
Is it possible to leave column A, B, C, D untouched and match against column E from column D?
If E matches D then leave in the same row and if E does not match D then move to column F? The identical numbers may be included in the columns, but different rows.
I have a set of transactions from one system which is column D and I have another set of transactions from another system which may or may not have the same transaction from column D. They are all sorted from + to -. I just need to match up cells from column E to column D.
I have a report that has thousands of lines... debits & credits. Most of them offset one another, 0 balance. However, there are still many w/ missing credits that need to be identied. Instead of going thru 10,000+ lines to pull out lines w/o credits - Is there a way that I can cross check the amount between lines (1&2, 2&3, 3&4 etc etc) and if their total is 0 then I want to move them to another sheet (Matched)?
I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
I have two workbooks: one is a daily workbook that will be used to keep track of work accomplished, the other is a weekly report that is generated by head office.
What I need to do each week when the head office report is generated is to match up the Project ID's (they are the constant in each workbook) from the daily workbook with the weekly one. If there are Project ID's that are new, the corresponding information would then be copied over to the daily workbook.
I am working on the copy command but I'm just not sure how to go about setting up the search to match Project ID's.
Is there a function to compare 2 columns to find all of the values from one column that are not in the other column? Basically my data looks like this: A........................B.................C procedure1...........................225-3 ........................ 25-1...........22-2 .........................33 .............457 procedure2...........................33-55 .......................35-12...........25-6 .......................12-8.............25-1 procedure3...........................33-89 .....
I have another list of data (just the numbers like columnB) that I want to put in column C and see what is in column C that isn't in column B. The numbers will be arranged in a different order, and there will be data in column B that isn't in column C. What I need to do is find out what is in column C that isn't in column B so that I can go back and define what procedure they fit into (that is a seperate process).
Macro is not working .So the macro I am using is supposed to look back at all the months tab, match the Name from previous tabs and if they match change background color of the active sheet's cell to red.
Right now the macro is only able to lookup the name in the previous tab (i.e. For December it will only lookup November tab and not October-January).
e.g. (Candidate name is Jack King and he is in (october's tab, Column A Cell 2 )
I want this candidate name to turn red once I type his name in November/December tab.
how to write the following in a macro. The task is to have the macro compare both the SSN, amount, and date...if they match go to next row. If Mysoft side exists without a match on the OMNI side, then range for that A-D will be cut and moved to Mysoft Only worksheet and the cells below will be moved up....same holds true for the OMNI side.
I need to run the same database dump every day and find the differences. Both spreadsheets will have the same column headings, with Column A being the lookup value. Each spreadsheet will have many columns of data. I need to find the differences from Row 1 on spreadsheet A with Row 1 on spreadsheet B.
Example: Spreadsheet 1, Column A value is 900026. Need to find 900026 in Column A on Spreadsheet 2. Compare all the data in each column to see what has changed. If anything has changed on Spreadsheet, copy the row from Spreadsheet 2 onto a new sheet and 'tag' which data has changed.
Also, again using Column A as the identifier, if there are rows on data on Spreadsheet 1 that do not appear on Spreadsheet 2, copy the entire row onto a new sheet and tag it as "Not on new datadump". And vice versa, is there are rows of data on Spreadsheet 2 that do not appear on Spreadsheet 1, copy the rows of data onta a new sheet and tag it as "Not on old datadump".
I have a summary list of all projects that my employees work on over the course of the month. Its gets sorted by date and project and is a pretty extensive list.
My goal is simple...to search through the list and add a blank row between each project.
I have written this code, that does work, but it takes quite some time to execute and I know there has to be a better way.
Can you guys take a look at it and see if there is more efficient way to do this?
Dim myarray As Variant Dim cell As Range Dim mycount As Integer Dim i As Integer
Set myarray = Worksheets("summary").Range(Range("b2"), Range("B65536").End(xlUp)) Set cell = Range("b2") mycount = myarray.Count
For i = 0 To mycount If cell.Offset(i, 0).Value <> cell.Offset(i + 1, 0).Value Then Range(cell.Offset(i + 1, -1), cell.Offset(i + 1, 3)).Insert shift:=xlDown i = i + 1 mycount = mycount + 1 End If Next i
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I have data in sheet1 and sheet2.I need macro i will check sheet1 data wth sheet2 data,if there is any differences in both sheets then highlight those unmatched records in both the sheets.
I am using excel 2003 to count my inventory in the following manor:
I have a "database sheet" that is comprised of possible inventory SKU numbers.
I have a "scanned sheet" that lists all the SKU's that I have scanned in the warehouse
I have a "count sheet" that counts the number of times each SKU in the database appears in the "scanned sheet"
Am I going about this in the most efficient manor?
Question 2: Frequently, new Items appear in the warehouse that are not yet in my database. Is it possible to create a list of SKU numbers that do not have a match in the database? As it stands, any SKU numbers that are scanned but not already listed in my database - simply do not get counted.
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100 200 300 400 100
Column B
400 200 300 100 500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
Not sure what is the best way to explain this- basically I need Name 1, 2, 3 to select the names from [B2 to F2], excluding the name that matches with B4 (because that is a variable).
For example, Name 1, 2 and 3 should be John, Mila or Paul (in any order).
And when B4 is changed to John, Name 1, 2 and 3 should be Amy, Mila and Paul.
I am having trouble using vlookup and offset to arrive at a solution. I have a row a 5 formula based items. For example:
C 1 2 3 4 1 C 2 3 4 1 2 C 3 4 1 2 3 C 4 1 2 3 4 C
I have been using the match function to find the location of C, but I want to output the items in the same row as C, in the order they appear if C was removed.
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
Michael = Resident Joan = Intern Patricia = Consultant James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?
I have a spreadsheet with around 1000 rows on data. in each row of data there is a number e.g. 2673 (all in their own cells) so in column A you would have a list of just numbers in another workbook, the number thats in each row corresponds to another value e.g. 2673 = CE103. So this workbook has 2 columns. In column "A" you have the numbers(2673) and in column "B" you have what that number matches with (CE103) i need a way of replacing all the numbers with what they equal Workbook 1 A B C 2673 XXX XXX 513 XXX XXX 5107 XXX XXX 604 XXX XXX
Workbook 2 A B 2673 CE107 513 CDR57 5107 QV906 604 MNT57
There is an example of what i have (hope its understandable) and what i need is, the data from workbook 2 put in to workbook 1. So instead of having 2673 in workbook1, i would have CE107. And the same for the others e.g 513 would be CDR57.
I'm working on a project requiring the matching of data from multiple worksheets and got some useful advice from someone on here a few months ago to get it up and running.
At the moment I'm using SUMPRODUCT with an IF argument to check rows on one sheet for matches on 5 others and return a "Yes" or "No" value, which is working fine. The next bit of analysis however requires copying the value from another column on rows that match, and pasting it into the first sheet.
I am an avid greyhound racing fanatic and I would like excel to sound an alarm when a race is due. I have entered all the race times down one column A1-A146 in this format 08:33, 08:37 etc Is there a way to get excel to use the system clock and check these times and sound an alarm 1 minute before the the time I have entered, i.e. 08:32, 08:37 as in the above examples?
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro. Shape color changes as the hyperlinks are selected from sheet1.....
