I have 2 tables
One is paycheck issued
The other one is paycheck cashed
My goal is to find out which paycheck is not cashed
Table 1
Table 2
PAY CHECK ISSUED
PAY CHECK CASHED Name Net Pay
Name Net Pay Last, FIRST 76.28
FIRST LAST 76.28 Last, FIRST 163.14
Last, FIRST 193.48
FIRST LAST 193.48 Last, FIRST 156.97
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
Macro that compare between 2 tables in 2 different sheets - BOM (Bill Of Materials) compare
And Create a Table with all differences.
Table 1 (sheet1):
PartNumQTYLocation
000 2 A1
111 3 B1
222 1 C1
333 4 D1
Table 2 (sheet2):
PartNumQTYLocation
333 3 D1
000 2 A1
111 3 B2
222 1 C1
444 5 E6
Table with all differences (sheet 3):
PartNum (Ver1)PartNum (ver2)QTY (Ver1)QTY (Ver2)Location (Ver1)Location (Ver2)
111 111 3 3 B1 B2
333 333 3 4 D1 D1
Blank 444 Blank 5Blank E6
Is it possible for me to compare two pivot tables and get a report. in the attached example, is it possible to compare sheet1 and sheet 2, if the values haven't changed, then it should be green, or it should be red.
View 3 Replies View RelatedI need to check data from two tables(A and B). They are supposed to match each other and my job is to check if there's error in it. Each row contains several criteria, and all criteria need to be matched. I need to give a report on the info that
1) contains in table A but not in B
2) contains in table B but not in A
3) contains in A and B but some of these criteria do not match..
I have basic knowledge of VBA. Forget to say, they are in different order. And even after sorted, the name may still unmatch with each other, so can not use formular like "=Sheet1!A1=Sheet2!A1"
Example:..........
i have a database. column a is the last name. column b is the first name. column c is a person's title. i regularly have to merge this database with another from another department and compare to see that all staff are processed and that titles are correct. i have been trying to write a formula that can pull from the contents in any given row, search the rest of the sheet to find if there is an identical person listed and finally let me know if the title is the same. i just need a "true" or a "false" if both conditions are met.
View 6 Replies View RelatedHow do i get my excel to compare between tables and come up with a result. For example i have 2 tables,
Table 1
[Code]....
Table 2
[Code] ....
How do i make them compare and then come up with a result like
[Code] ....
I have two employee rosters, "yesterday" and "today", with same columns heading(First, Last, Location, Status, etc, etc, etc . I want to compare both rosters and highlight the differences on "today's" roster if an employee's information (location, status, etc) changes from yesterday.
Another change could be, an employee may not be on today's roster as he was yesterday and I could have a new employee on today's that wasn't on yesterday's. Is there a way to copy the row/record from yesterdays roster and add him to today's but highlight it so I know that he is gone?
Compare Two Sheets and Highlight Differences (Sheet attached)
I have two lists (List A and List B) of hundreds of items that reside in a single worksheet.
Some items may or may not occur in both lists.
Every item in both lists has a value on the range of 1-50.
I am only interested in those items that occur in both lists.
I need to find the difference of the values for each of these items (List A - List B), including negative values.
I have tried many variations of formulas using VLOOKUP with no luck.
I cannot figure out how to accomplish this with a Pivot Table.
I want to make a macro for this.
Here's an example:
List A
W 29
X 11
Y 13
Z 4
List B
V 8
W 10
Y 30
Z 6
Where the results would be:
W = 19
Y = -17
Z = -2
I have two tables with "X" and <Blank> data. The tables share the same column headers. I want to compare the rows of each table and if the rows contain an "X" in the same column then it puts an "X" in the third table. I have attached a sample file with my expected results on the third worksheet. I have created named ranges if that helps the formula writing.
Name1 =Sheet1!$A$2:$A$5
Name2 =Sheet2!$A$2:$A$5
Produce =Sheet1!$B$1:$E$1
Group1 =Sheet1!$B$2:$E$5
Group2 =Sheet2!$B$2:$E$5
Sumproduct seems to do the trick if I turn the "X" into "1" and <blank> into "0". If there is a match the value is greater than "1".
=SUMPRODUCT(Sheet1!$B$2:$E$2,Sheet2!$B$2:$E$2)
I prefer to use "X" though if I can. I would like to automate the formula instead of manually adjusting the ranges for every cell.
My date of birth is 09/08/1970.I want to know that as on today,which years,months and days I have passed?
View 3 Replies View RelatedI'd like to perform an operation to make my bookkeeping beter, analysing the situation per client.
I maintain each month on separate sheets, and every expense, or income (let's say in colomn D, is labelled with the name of the client (colomn H).
Is it possible, on another worksheet, to make a function that would calculate the situation per client (and per month) ? It would then be able to make the sum on each month for what has been spent or billed, and this on one or 2 lines....
I need to look colB and colC should be equal to colH and colI, IF both cells matched, then copy the EmpNo(ColB or colH) and Counter(colC or colI) get the difference of values in another colomn
If there is any row for Employee or Counter issing from either of tables populate with RED in either of 2 colomns,
for example:at row 17, table 1 has a missing colC, and row 17(table1) = row18(table2), it should populate the row17 for table2, as a reference.
Desired output is to compare a value in one table to a value in another table based on the same values in associated columns in each table and produce a "True" or "False".
In each worksheet, the information should be similar but I want to compare them.
Worksheet#1 = "ABCD"; Column A = Lot#; Column F = "Defect T"
Worksheet#2 = "EFGH"; Column B = Lot#; Column R = "Defect T"; Column I = "Inspection level"
I want to find the lot # from cell A2 in worksheet "ABCD" in column B of worksheet "EFGH" AND column I in "EFGH" = "1st Inspection". At the same time, I want to compare the cell in F2 in worksheet "ABCD" to the value in column R that correlates to the same row where the lot#s match.
Is it possible to use a nested IF statement to match the cells?
I'm making a basic excel sheet as a hotel reservation tables. Sometimes we accommodate who do not follow the hotel regulation, so we add them to the black list table, made from (First name, Last name, Phone number). See image below:
Then if we reserve for a new customer, we use this sheet:
Here is my question:
what should i do, to make a raw color turn to red if i have entered a black listed visitor ?
e.g. if i enter "Martin" as a first name, AND "Issa" as Last name, AND "76344909" as a Phone. then the raw will turn to red to indicate that this customer is black listed.
it's possible to set up conditional formatting to compare values between two identically-formatted (i.e. same row and column) pivot tables?
I have two pivots from two different sources and I want to be able to visually identify discrepancies between the two. Both have dates as the row labels (same date range) and categories as column labels (some categories may not necessarily be present on both pivots but the format of the labels - i.e., the names of the categories - is consistent where there is overlap)
I've tried doing this with 'traditional' CF but whenever I manipulate the pivots (i.e. by selecting / deselecting an item in a report filter), the movement of the columns trashes the formatting and I have to set it all up again.
Figured, given the structure of the tables is essentially the same, there might be a smarter way of doing it (by referencing the pivot fields in some way)
I have 2 Data tables in 2 sheets of the same workbook. I want to compare my column A of table 2 with column A of table 1 and delete any rows of table 2 where (column A of table 2 has a value which is not in the column A of table 1)
In Excel I used the Vlookup function and deleted any rows which had Error in result of the formula. May I know how to execute this in VB
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
Say I have 10 tables and want to copy them into one single table. Easy right? Just copy / paste.
The restraint with copy paste is, if I make an adjustment to one of the 10 tables, it will not be reflected in the master table. I would have to recopy the table every time I make a change.
I was wondering if this there was such a function that says: "Once done copying with X table, start copying Y table, and so forth."
I have a workbook that contains mutiple tables in multiple sheets that are all in the same columns in each sheet but contain various rows. Data may not be entered in every single row within each table. I'm trying to create a master list of all data from all of these tables on a single sheet so I can analyze the information in total. I don't want to show any blank rows on the master file where data is not entered in each table. I've tried using the consolidate function within Excel but am not looking to perform a function (i.e Sum, count). I've also tried a pivot table from multiple consolidation ranges (Alt + D + P) but do not like the limited functionality of the pivot table. I do not have much experience with VBA but am assuming this may need to be done using code.
Attached is a sample workbook with named ranges of each table. Example.xlsx
with this macro?
I have a lot of pivot tables on multiple sheets in one workbook.
I want to deselect all "(blank)" from rows, and sort both rows and columns in ascending order.
I recorded a macro but it only refers to specific pivot tables, I would like it to do the same sorting for all pivot tables in the workbook.
Sub PivotBlankSort()
'
' PivotBlankSort Macro
'
'
Windows("Alt Assessment Y10 13-14.xlsx").Activate
Sheets("L&C Prog Sum2").Select
With ActiveSheet.PivotTables("PivotTable10").PivotFields("English")
.PivotItems("(blank)").Visible = False
[Code]...
etc as I move to each separate pivot table.
Okay, so I have this project for my accounting computer applications class. I'm making it so much arder on myself than what it probably should be. But anyways, this project is a four year plan spreadsheet for the business/accounting division of the school. Inside the spreadsheet is a page that has 15 different tables, representing 5 years with 3 semesters each, fall spring and summer. On the requirements for the major chosen, I would like it to automatically recognize if the class has been placed in the semesters tables and recognize all of the information needed. The only problem is, a single vlookup only allows one table per cell but I need all 15.
I've heard of using the if statement along with these but I've only heard of it being done with a few tables and not 15, and I don't understand how exactly that works anyways.
I am having a lot of trouble with pivot tables in Excel 2007 VBA. I am trying to create pivot tables using macros (connected to buttons the user can press to create the pivot table) - please don't ask why, but i need to do this!!!
I used the record fuction in excel 2007 to produce macro code which will produce the required pivot tables when the user presses a button.
Unfortuanately the coding seems to work fine when i have one pivot table in a file but breaks down if i record code to produce another pivot table.
I have attached some code below (which was produced by the record function) and is intended to produce 2 seperate pivot tables (the macro submacro2 produces the 1st pivot table and the macro submacro4 lower down the page produces the 2nd pivot table). I have also indicated the point in sub 4 where the code breaks down - basically submacro4 just doesnt run!
Background: I know ZERO about VBA and I am a Vlookup & Pivot Table noob, but experimenting everyday.
Every week, since August 29, 2009, I get a sales report from my customer in raw form showing point of sales data for the previous 7 days. After manipulating the data I end up with 11 columns.
Now, if I am only concerned with that one week then I can drop the whole sheet into a Pivot Table and all is well.
However, I have 12 sheets now (with more to come), one for each week, and the row count ranges from 3,328 to 16,414.
I do not want to consolidate the data.
I can copy everything to one sheet, and hope not to max out at the million row mark, but would prefer to keep it tabbed by week.
Is it possible to select multiple tables with listbox. If not ...
View 6 Replies View RelatedThis is my data:
This is the Pivot Table I created:
The Pivot Table is exactly what I want and I like that I can also sort by school or district. The problem: Cells B6 through E6 show up with correct information but the totals below that are all wrong. They seem to pull the same data from question 4.
I have an Excel spreadsheet of data that I would like to export into tables in a new word document.
The code below (without the marked section) does this, but I can’t figure out how to create a second table after the first one.
Eventually I will use a For…Next loop to do this many times, but I’m trying to make the problem smaller by just making a second table.
Sub CreateNewWordDoc()
' add a reference to the Word-library
Dim wrdApp As Word.Application
Dim wrdDoc As Word.Document
Dim wrdTable As Word.Table
Dim xText
Set wrdApp = CreateObject("Word.Application")
Set wrdDoc = wrdApp.Documents.Add ' create a new document
Set wrdRange = wrdDoc.Range
wrdApp.Visible = True.........
I want to a macro or a function that can search for the value which corresponds to a cell and copy it to another cell. please refer to the attachment for more detail.
View 9 Replies View RelatedI am wondering if there is a way of performing Vlookup across several tables? I have tried to create a formula myself based on lookup and nested vlookups, but am getting all tanlged up, especially as I need an If isna formula in there so that if there isn't a result, it displays a 0 rather than a #N/A.
See the attached. I do compeltely understand that it would be so much easier if all the data on the commission worksheet was in a simple 3 column table, but it has to be split as it is creating 3 tables. exactly what formula needs to go in cell D7 on the rates worksheet that I can drag down, which will check for those initials across all 3 tables? (The initials will only appear once on the table on the commission worksheet.
For data I am using 1 pivot table. I have 4 tabs which use this pivot table to present different data on each tab.
For the first question, I have the same pivot table in the sheet twice in order to have multiple pivot charts with similar data but setup differently. I found this to be the simplest solution to presenting the data in the manner I want to see it. Otherwise I wish to set the tables up so that if I change a filter in one of the tables that the data is automatically updated to both tables.
The second question, this relates to the first question somewhat. I wish to change filters in 1 pivot table from tab one, and once that tab is updated I wish for all of the other tabs with this same pivot table to automatically update with the filter changes from the first time.
