Append Multiple Tables Into One Table
Nov 27, 2012
I have a workbook that contains mutiple tables in multiple sheets that are all in the same columns in each sheet but contain various rows. Data may not be entered in every single row within each table. I'm trying to create a master list of all data from all of these tables on a single sheet so I can analyze the information in total. I don't want to show any blank rows on the master file where data is not entered in each table. I've tried using the consolidate function within Excel but am not looking to perform a function (i.e Sum, count). I've also tried a pivot table from multiple consolidation ranges (Alt + D + P) but do not like the limited functionality of the pivot table. I do not have much experience with VBA but am assuming this may need to be done using code.
Attached is a sample workbook with named ranges of each table. Example.xlsx
View 9 Replies
ADVERTISEMENT
Dec 6, 2012
I'm having an issue where I want to merge lots of tables held in different spreadsheets into one large table so that I can use it in a pivot table. The attached spreadsheet demonstrates what I mean:
So there are 3 different accounts held in the first 3 tabs. These all have the same columns and format. I want to merge these automatically into the table that is in tab 4 so that I can use the pivot table also demonstrated in this tab.
What I want to happen is when I add rows to the tables in the first 3 tabs, these are automatically populated onto the 'overall' table in the 4th tab. (I'm aware I could do this manually, but for what I'm using this for these will be dozens of tables with hundreds of rows updated monthly).
Is this possible? Basically it doesn't matter how it's done, as long as i can show the information held in the pivot table each month end.
View 3 Replies
View Related
Jun 3, 2014
I would like to summarize information from multiple tables (across multiple worksheets) into one table using a formula.
I have Attached an example: Book6.xlsx
The 'option plan 1' tab shows multiple summary tables for different types of clothing. (the type of clothing is text in the top left hand side of each table just under the month i.e. "jersey tops"). This tab is an example of 6 similar tabs that come from 6 different workbooks...
For each clothing type (i.e., Jersey Tops) I would like to extract the TTL OPTIONS no. and the TTL UNITS no. for each store and show these on the table in the "front Sheet". against the clothing type.
Is there a formula that can match the Clothing type from column A in Option plan 1 tab with Column C in the the front sheet tab and subsequently Match up the TTl Units and Options for each store on the front sheet tab.
I have manually keyed in what I would like the formula to show for 'jersey tops' on the Front sheet tab.
View 5 Replies
View Related
Mar 9, 2014
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
View 1 Replies
View Related
Jul 1, 2013
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
View 2 Replies
View Related
Aug 16, 2013
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
View 3 Replies
View Related
Mar 27, 2014
I have some cells in column A that are linked to a template on another sheet. I need a macro that will copy the values and paste them in a column at the end of my table.
View 4 Replies
View Related
Apr 28, 2012
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
View 5 Replies
View Related
Sep 5, 2006
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
View 3 Replies
View Related
Sep 5, 2008
I would like to append multiple workbooks with multiple worksheets in a separate workbook. For eg. I have workbook "A" with sheets 1,2,3 and workbook "B" with sheets 4,5,6. Now I want to append "A" and "B" to create workbook "C" with sheets 1,2,3,4,5,6.
View 9 Replies
View Related
Jan 13, 2010
I have about 100 csv files of the same format that I would like to append into a single master file. Order is not important for appending (I can do a column sort later) I can do copying and pasting, but this will take a long time especially because I will creating more master files from completely different CSVs in the future. Is there a faster way to append CSV files?
View 14 Replies
View Related
Aug 2, 2008
I have one worksheet with a series of columns (version 1, version 2, version 3). Each column contains one or more number values.
I would like to:
1. copy the data from each of the columns to a single summary column on another sheet.
2. update (append new data to) the summary column each time I add a new column to the first sheet.
Having trouble attaching file, so here is sample data with three columns.
Ver. 1 Ver. 2 Ver. 3
154261895618382
154951914118530
158211940918606
169761944418614
170961946918651
172491955318690
177281963218720
183761972418840
186881976619039
1883019814
1884819820
1890519875
19086
19197
View 5 Replies
View Related
Oct 8, 2012
[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.
View 9 Replies
View Related
Jan 25, 2010
I need a macro to do the following
1.Get list of .xls files from specified folder.
2.Append the files in new workbook in same folder.
Ex:
D:/users/excel/Sample_sheet1.xls
D:/users/excel/Sample_sheet2.xls
D:/users/excel/Sample_sheet3.xls
I want to get the list of Sample_*.xls and
create Sample.xls master file which adds the above three .xls as sheets in it.
Actually my macro as below
View 10 Replies
View Related
May 10, 2007
I have a workbook that has a lot of worksheets. I want to merge all the worksheet data, skipping blank rows from each worksheet and simply appended the data on one single worksheet. The goals is to just copy the data from worksheet b and append to worksheet a>copy data from worksheet c and append to worksheet a> etc. etc.
View 9 Replies
View Related
Feb 1, 2008
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
View 2 Replies
View Related
May 1, 2008
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
View 8 Replies
View Related
Oct 28, 2013
I have a table of two columns, but I want them to be two separate but adjacent tables.
View 2 Replies
View Related
Jan 10, 2013
I need to put together a number of worksheets, each worksheet is to record project information that's happening at our production sites and all the tables are uniform in design. There also needs to be one 'master sheet' in which all the information added on the lower sheets is automatically added.
So basically I need to have four tables on separate sheets that feed information in to one table on a further sheet.
View 13 Replies
View Related
Jan 10, 2014
My family owns a Fast Casual Middle Eastern/ Mediterranean Restaurant. I'm taking charge of making it as profitable as can be! Our plates are different combinations of kebabs, rice, Falafels, Gyros, salad, platters. So theirs tons of combinations.
I am Dead serious about knowing REAL plate costs:
I spent days entering price data, weighing meat, produce, calculating usable yields. I then built "component builders" using data validation drop-downs, and Index + Match functions to construct the costs of the recipe items,standard base items and side items. So I now know How much a skewer of Marinated Kebab Costs me, and all the Components that go into building a plate.
I've now built a "Plate Builder" (See Pic) to create the EVERY combination available at our restaurant. So when I'm done filling in all the builders, I'll have a whole lot of tables. I'd like to pull the name and plate cost from each table and create a big table organized by whether its eat in or take out. How do I do it.
TL;DR: Need to create a table that pulls data from several other tables....
View 2 Replies
View Related
Jul 18, 2012
I have an excel workbook with 11 different worksheets. Each worksheet represents a project my company is working on. And in each worksheet there is exactly the same table, just with different data).
Now we would like to get an overview of all these different data put together in one 'summarizing' table on a new worksheet (number 12).
-Is it possible make such a table without having to copy past all the time?
-The data in the tables may change over time, so it would be good if that 'summarizing' table automatically adapts to the other ones.
View 9 Replies
View Related
Apr 15, 2008
I have 2 worksheets which have a table on each. I would like to create a list using data from both tables. The list I am looking to create is for an upload fom an excel planning sheet into an ERP system and requires certain data fields and a certain format. Both table have the same amount of fields and the dates across the top. On worksheet one there are material numbers on the left and dates across the top. In the list I require I would need the dates down the left in the first column, next the material number, next the quantity from table one and then the last column I would require the value from the second worksheet which is relevant to the material number and date from the first table. I have tried pivot tables but cannot get this to work and feel it may work with a lookup. I have attached an example of the data.
View 2 Replies
View Related
Mar 23, 2009
I have a data dump, on this single excel sheet their are a large number of tables, up to 100 in all, and what i need to do is extract key figures to form a summary table which i then produce stats for.
What i need is a macro or code that will automatically scan the tables, retrieve the key figures and return them in my summary table.
Attached is an example, you will see three small tables labelled Servicing query complex, servicing query simple and total.
I need to extract the blue cell, being the name of the table, the purple cell being the last figure in column c in each table (total number or processes) and the green figure being the the average turnaround. The final figure is i think the hardest to get as its the total number of figures in column c that have either a 0 or a 1 in Colum A. Note that their will be table where neither 0 or 1 will appear.
All figures are dummy figures but the table structure is correct.
View 14 Replies
View Related
Jul 23, 2012
I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?
View 4 Replies
View Related
Apr 10, 2014
I have 10 workbooks that each contain a table of data. Each table is consistent in format and headings.
I need to group all 10 tables into one big table. I do not want to merge or combine data just simply have all the data in one master table.
Previously I have used named ranges and arrays to copy them in but this seems cumbersome and thought there must be an easier way to do it.
View 4 Replies
View Related
Mar 22, 2014
I threw together some sample data, just to test things out. It's very basic, one table of "Customers" and another table with the 50 US State's and their corresponding abbreviations. In the "Customers" table, there is a column of state abbreviations, and in the "States" table there is a column of state abbreviations as well. I have a relationship set up between these two in PowerPivot.
Each "Customer" in the "Customers" table has a unique "User ID". In some states, there are multiple "Customers" (User ID's).
When I try to pull a PowerPivot Table off of these tables, it's showing me all the states as being associated with every user ID. It looks correct if I just pull in the "States" column and the "User ID" column from the "Customers" table...
image1.jpg
But as soon as I drag in the "Full State Name" column from the "States" table, it screws up the PowerPivot Table and shows all the state names being related to the state abbreviations, and all the User ID's as being related to all the states. (This isn't the full image of the table, only part of it, since the full image would be too large).
image2.jpg
I'm used to doing everything with VLOOKUP's, and seldom used PivotTables at all in the past. But it was my understanding that these new PowerPivots would eliminate much of the need for VLOOKUP's.
View 2 Replies
View Related
May 27, 2014
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
View 3 Replies
View Related
May 19, 2014
I have a table which is extracted from a database using 2 tables.
1 Header and 1 details table.
I want to display the latest date in column E.
As Column A,B,C is the header table and column D,E is the details table.
Can this be done in vba or a pivot?
View 1 Replies
View Related
Jan 4, 2014
I have a table that contains all my data and would like to filter it by company into their own tables that will stay up to date with the main table and then hopefully somehow calculate their investment returns (future stage). I thought Microsoft Query would work but I came across a problem see my other post MS Query returning data to excel some columns I cant sum looks like text
Excel 2010
View 1 Replies
View Related
Jul 17, 2014
I have a lot of data to try and summarize but they are in multiple smaller tables. I wish to only extract 2 variables, 'number' and 'total' from all of my smaller tables (lots of them) so the problem looks like this, i have these tables for example where the 'total' title is in a different column depending on which of the smaller tables you are looking at:
cat 1
cat 2
cat 3
total
[Code]....
I am trying to get:
number
Total
123456
30
234567
60
[Code]...
Because the number column is fixed and all of the smaller tables will all have a number in the same column maybe i can insert a column next to the number column and say "find the value where the column title is 'total' - however the location of the column title would change so not sure if this would work? I was also thinking of sorting the columns but that will not work either because of the smaller multiple tables?
View 4 Replies
View Related
