Comparing Entire Rows Within 2 Worksheets And Then Display Output In Another Worksheet Using VBA
Feb 6, 2014
I'm trying to compare 2 worksheets with the same headers(NAME, ADDRESS, CONTACT NO...). What codes should I use that when there is a duplicated row in worksheet A and worksheet B, it will be deleted and when there are 2 names with different addresses and/or contact no, the whole row in file A will be obtained. Output should also be in another worksheet. It goes like this.
worksheet A
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
[Code]...
So the output should be:
worksheet C
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
JIM JKL 345
SAM FGH 789
Is this possible in vba?
View 1 Replies
ADVERTISEMENT
Feb 23, 2014
Basically every month I keep a track of my sales in a spreadsheet.
I've attached a sample file : Discrepancy Form.xlsx‎
Sometimes I don't get paid correctly. So rather then filling everything in manually, I want to simply put a "Y" (for yes, there's a discrepancy) or "N" (for no, there's no discrepancy" next to worksheet "Sales" but then have it display the values in worksheet "Discrepancy."
View 9 Replies
View Related
Apr 9, 2014
creating a macro that would compare two worksheets and their differences would be copied into a third worksheet in the same workbook? Several key criteria is needed:
1) The third worksheet would need to note only the data from the 1st and 2nd worksheets (including headers) that had differences. An additional column would do the difference calculations for the data whereby numeric values are subtracted (worksheet 2 from worksheet 1 values) and non-numeric values would note "Pass" or "Fail".
2) All data values that had differences would be formatted in yellow shading on the third worksheet.
3) The unique ids from column A in worksheet 1 would have to have be noted in column A of the third worksheet; even if they didn't have a difference from worksheet 2.
4) The third worksheet would need to note all of the columns noted in worksheet 1 and include the difference column for each unique column.
5) Flexibility in code to allow for addition of new columns to analysis.
see attached sample spreadsheet whereby Worksheet 1 = "dv file", Worksheet 2 = "price file" and Worksheet 3 = "Error" for purposes of this discussion.
View 9 Replies
View Related
May 6, 2014
After running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
View 6 Replies
View Related
Jan 18, 2014
Essentially what I want to automate is a check through one list on the Sheets("Notes") in column A, with another column B on Sheets(template). If there is a match I want to insert a part of the row that the match occurred on Sheet("Notes"), and insert it above the row where the match occurred on Sheets(template).
Here is my code so far, currently I keep getting a "Application-defined or object defined error" on the line
VB:
Sheets("Notes").Range(Cells(i, 2), Cells(i, 11)).Copy
VB:
Sub add_notes(template As String)
Dim Rng As Range
Dim i As Integer
[Code].....
View 5 Replies
View Related
Jun 24, 2008
I have been searching the boards long and hard for this solution and have yet to find that applies fully. Every day I need to search through 20 worksheets for transactions occurring on a specific date and copy the row onto a new worksheet. I would like to run a macro that would allow me to search for a specific transaction date in column C of each worksheet and if the date matches it will copy the entire row to a new worksheet.
The issue I am having is that the transaction lists are a running sum of all the transactions for each account. Therefore, the range that the macro needs to search will change daily as well. Furthermore, the date that I would be searching for could potentially appear in column A or B but I only want the row if the date matches that of column C. Also, on some sheets there may not be a transaction at all.
View 9 Replies
View Related
Feb 23, 2014
I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
View 3 Replies
View Related
May 26, 2009
how to split one large worksheet into several worksheets using VBA. The only criteria I have to go on in the large worksheet is the existence of blank rows between each chunk of data I want on it's own worksheet.
Please see the attached zip file. There are 39 chunks of similar (but varying in number of rows) data that are separated by 3 blank rows, so I want my workbook be split into 39 new worksheets. My goal is to get the data into list/table format so I can work with it more easily and export into Access etc.
Also, just out of curiosity, is it possible to convert a HTM file into CSV? The attached data starts life as a HTM file that I just convert to XLS
View 6 Replies
View Related
Feb 4, 2010
column I row 11 has a functional argument that simply states to display the output
as .843 I need to edit it to .844 and I cannot seem to find out where or howto edit it.
There are others like this that I need to do too so I need to learn how to do it. Not just have someone do it for me.
ALSO as you can see this sheet displays #N/A all over the filled in cells... I would like them to be blank until I enter some pertinent info... I tried this is cell m7 BUT as you can see in m12 it goes back to the N/A
View 4 Replies
View Related
Apr 24, 2013
I have numbers in cell A1 (say 3545852) as a sum of a data range. I want to display it like this "Rs. 35,45,852.00 Cr."
How can i do this. I used text function like this
="Rs. " & text(A1,"0,00.00") & " Cr."
But it displays "Rs. 3545852.00 Cr."
I want thousand separator also.
View 7 Replies
View Related
Jan 27, 2009
I have two columns of card numbers (16 digits) in text format, as column A and column B. In column C, I'm trying to figure out how to compare column A and B for matches, and display the match in column C, if there is a hit.
View 4 Replies
View Related
Jul 3, 2013
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
View 5 Replies
View Related
Aug 8, 2009
I want to display the path result from a Floyd Algorithm matrix output..
You can download the excel file here : http://ifile.it/lw4tgic
It consists of 1044 nodes, and we need to find the path between 2 nodes for ALL pairs..
Now, to find the path between 2 nodes, we need to :
1. Find the resulting cell of corresponding 2 nodes (y to x = z)
2. Update the path with that value (y z x)
3. For all the direct pairs in the current path (yz, zx), find the resulting cell
4. If destination (x) not the same with result (z) then repeat step 1 for that pairs.
5. repeat until x = z for all pairs.
Maybe it's better if i use an example....
we'll use T01 to E78 as an example
T01-E78 = if you look in the table,
y (vertical) = T01,
x (horizontal) = E78
z (result) = E77, so
T01-E78 = E77, so path = T01-E77-E78
check if result of T01-E77 = E77 (x = z?)...........................
View 10 Replies
View Related
Sep 28, 2012
Got a road block on one of the trackers which I am trying to create which compares some of our agreements. Basically we need to compare current production with our contracts and then bring the tier level they are at in order to then calculate how much in overrides we receive. Belwo is an example:
Input Value = 140000
Out Should be = 1.5%
Set of Values 1
T1
T2
T3
T4
[Code]...
In a nut shell it will look for 14000 in set of values 1 and pick T3 to then go in set of values 2 and display corresponding T3 which will be 1.5% in above example as output.
View 2 Replies
View Related
Jun 17, 2009
I've tried searching for an answer all over with out success. Here's my dilemma. I've got two columns (A and B) with over 1000 entries in each column with computer names. Most of the names are the same however some differ in the way that they might be in column A and not in column B and vice versa. What I would like to achieve is to compare those two columns and display the result in column C and D but keep the names of the in the retrospective column.
What I mean by that is that if a name was found in A but not in B I would like to have it displayed in column D and vice versa. If a name is found in B but not in A, to have it displayed in column C. If there is an easier of doing this, please by all means (i.e. highlight the name in A if missing in B and vice versa).
View 5 Replies
View Related
Aug 22, 2009
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
View 9 Replies
View Related
Sep 8, 2007
have been trying to write a VB macro to compare two spreadsheets. Here is what I need help achieving....
Compare Sheet1 and Sheet2. Data exists in rows that have a unique identifier in one column.
If unique ID (with row of data) exists in Sheet1 and NOT Sheet2, add row from Sheet1 to Sheet3 and mark "REMOVE" in new column next to row.
If unique ID (with row of data) exists in Sheet2 and NOT in Sheet1, add row from Sheet2 to Sheet 3 and mark "ADD" in new column next to row.
If unique ID (with row of data) exists in both Sheet1 and Sheet2, take row from Sheet2 and place in Sheet3 and mark "UPDATE" in new column next to row.
View 9 Replies
View Related
Feb 15, 2010
Worksheet 1 has 200 rows, Worksheet 2 has 500 rows. Common denomentor in column A. Please advise how I can get 200 rows from w/s 1 pulling the relevant data from both worksheets into a new worksheet
View 9 Replies
View Related
Apr 3, 2008
I believe in the past that I have told Excel to send the output of the pivot table to different worksheets. For example if I have three regions- the pivot table would send the output to three worksheets and name the worksheets with the three regions.
View 5 Replies
View Related
Aug 22, 2014
I've got a spreadsheet with 2 worksheets in it.
On the first one we've got:
Name of the agent | petition REf num | Task
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO
John Doe | | RIL
John Doe | XERT-WWWW | RMT
Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK
Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
I don't know where to start
View 6 Replies
View Related
Sep 19, 2013
I currently have 2 worksheets worth of data in the same workbook. Each data set has its own date and time stamp in columns A and B respectively with varying data then following in the row. I would like to write a macro that would look in worksheet 2 and find the matching date and time stamped row in worksheet 3. Then select the data from both worksheet 2 and worksheet 3 and paste them in the same row in worksheet 1.
View 9 Replies
View Related
Feb 15, 2013
I have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
View 2 Replies
View Related
Aug 22, 2008
I would like to make a macro which compares the content of the same cells in two worksheets which are in the same workbook.
More clearer I have a workbook with two sheets (Sheet1 and Sheet2). What I would like the macro to do is to check cell A1 in Sheet1 and compare it to cell A1 in Sheet2 and so on till the last cell (IV65536). If there is a differnce between the two cells, then it should highlight the background of the cell in Sheet1.
I know that there has been similar requests on this forum (I searched and read them) but thew were different.
View 14 Replies
View Related
May 7, 2012
I would like to compare the data between 2 worksheets ("Sheet1") and ("Test") so that the contents of any cells in "Sheet1" that are different to the corresponding cells in "Test" are highlighted with a yellow background.
View 5 Replies
View Related
Feb 15, 2013
I have two worksheets, whereby the headers pm each worksheet are the same. the data however may not be. If the entries are different, I have used =IF(ISNA(VLOOKUP(B2,'Master 0202'!B2:B50,1,FALSE)),"New","") to pick up new entries. Fine.
However, those that are not new, i.e. they are both in the old worksheet and the new worksheet, I need to find out whether there is any change in any of the cells. The headers run from columns A to W.
How can I find out if there are any changes in any of the cells in one go? Can I use another VLOOKUP?
View 1 Replies
View Related
Dec 17, 2012
I want A1:A400 to display in B1.
View 6 Replies
View Related
Aug 26, 2013
I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:
Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
[code].....
The problem I have is that the output only have the sheet1!
I am using Excel 2010
View 4 Replies
View Related
Dec 5, 2008
I have 2 worksheets - one is a monthly update, the other is last month's data.
I want to highlight the changes on the monthly update sheet using conditional formatting.
I named the columns as ranges on the "last month" worksheet, and then used =Match(A1,Jan,0) (wheras Jan is the range on the "last month" worksheet where A1 resides)
What formula do you use to say "if A1 does NOT match a value in range "jan", then format it"?
View 9 Replies
View Related
Apr 6, 2011
I have a user that needs to compare MSExcel files with a mass number of worksheets within the file/files. Is there anything to compare Excel files and to print out the compared results?
View 3 Replies
View Related
Jun 13, 2006
I have a task that I thought would be quite simple but I can’t find a solution in any of the books I have or on this forum.
I receive a list of companies each day who owe money, in Worksheet1. The next day I receive an updated list in Worksheet2. Those companies who have now paid have been deleted from the list. I want to compare the two lists and highlight those companies in Worksheet1 who are no longer in Worksheet 2.
I’ve tried to do this by getting the values in the list in Worksheet2 to loop through the list in Worksheet1 but can’t make it happen.
I’d be really grateful if someone was able to help me with the code I need.
View 4 Replies
View Related