After a filter is applied I wish to achieve the following:
Concatenate the contents of the visible cells in columns B2 (down) & C2 (down) and paste to A38 in a sheet called Stats.
Paste the visible cells in D2 (down) to B38 in a sheet called Stats.
I have a spreadsheet that has many rows of data. I've filtered the spreadsheet, and want to paste a formula so that it appears only in the filtered rows. How can i do that?
View 1 Replies View RelatedIs there any method to paste a range of cells on visible cells only (ignore hidden cells).
View 3 Replies View RelatedI am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
My goal is to get all numbers that are negative in my A column to be positive.
I filter column A to show only records with negative numbers (there are now hidden cells) (simple example, A2=-1 , A3=2, A4=-3, filter so I can now only see A2 and A4). I insert a column (B) and do "=abs(A1)" and drag that down. This works to get the absolute value of column A into column B, for only the visible records. (so I still only see rows 2 and 4; B2=1, B4=3)
Now the hard part. I want to copy these numbers to column A, but only paste to visible cells. I highlight my data range in column B and hit Alt + ; to only select visible cells. Now I hit Ctrl + c to copy. If I then click on the first cell in column A that I want to paste to and hit Ctrl + V, the data is pasted in all cells, no spaces, filling in the hidden cells, which I do not want (in my example the 1 from B2 goes to A2 and the 3 from B4 goes to A3).
If I select my entire 'paste to' data range in column A (A2:A4), hit ALT + ; to select visible only, and hit CTRL + V to paste, it tells me "This command cannot be used on multiple selections".
AOther postings of seen seem to intimate that my first attempt described here should work (select visible only, copy, then paste), but doesn't! i can copy visible only easily enough, but when I paste, it ALWAYS pastes into all rows, hidden or not.
i created macro that copies and pastes only visible cells but from specific cell, i.e.
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=2, Criteria1:= _
"Functional"
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=83, Operator:= _
[Code]....
So that range C2341:C3437 is going to differ every motnh - how do i set it to just look from C6 below for those filtered cells?
Using Excel 2003 SP3. Trying to copy Visible Cells only from a block of sub-totalled cells. No problem pasting them to a sheet in the same workbook but when I try to paste them to another workbook the intermediate cells are pasted too! Intriquingly, after selecting VC only and copying when I expanded the sub-total block only the previously visible cells were blued out and had the 'marching ants' around them but the intermediate cells must have been copied as well - why? Question is how can I copy VC only into another workbook?
View 9 Replies View RelatedI'm using Microsoft 2010 and as like many others here I cannot find a way to paste into visible cells only i.e. the data I want to add to my variables is only available for every five years, but my data ranges 1990-2010 each year, so I have filtered my data to the 1990,1995,2000,2005,2010 so that I can paste the new data in, but of course it pastes into 1991 1992 1993 etc instead of the filtered results.
I've tried the find and select visible cells only but it says when you try and paste into them that it is not possible for more than one cell at a time.
I have a data of a large no. of rows with 5 columns. The last 2 columns are district and state. As it is an imported data, in some rows the data has shifted a column, i.e. the name of state is being shown in district column and name of district is being shown in the column to its left. I tried filtering the data such that it shows only those rows where names of the states are coming under district columns and then selecting the whole thing, cutting it and pasting it to the rightmost column. But even the correct district entries got pasted under state column. Undo, the further damage was controlled, but the original problem remains. Now i will have to cut and paste each row or only consecutive rows.
View 2 Replies View RelatedIn the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
Have a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2()
Sheets("GF_Scoring Database").Activate
Dim extvalue As String
Dim rng As Range
[Code]....
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies View RelatedI need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have imported .csv files into a workbook and there are instances where the data did not separate properly. When this happens, part of the text (an MCI circuit ID) that should be in column A, ends up in column B. This obviously moves the data that should be in B:I to C:J. I have the code below, which, when "*MCI*" is found in a cell in column B (and as extra validation), a "0" is found in column J, the text in column B is joined with the text in column A. This works fine. What I need is to also have it delete the circuit ID that still exists in column B and then cut the data in C:J and paste it in B:I.
If it matters, there could be as many as 25,000 rows.
Sub IfMCIexists()
Dim a As Long
Dim b As Long
Dim i As Long
Dim j As Long
Dim r As Long
Dim lr As Long
'Fancy report headings in rows 1 thru 7, so start at Row 8
r = 8
'Column in which text will be combined if conditions are met A (1)
a = 1
'Search Column B for condition one (if *MCI* exists)
b = 2
'Search Column J for condition two (if "0" exists)
j = 10
'Determine last row containing data
lr = Cells(65536, b).End(xlUp).Row
'Loop and concatenate if "*MCI*" is found in column B and "0" is found in column J
For i = 8 To lr
If Cells(r, b).Text Like "*MCI*" And Cells(r, j).Value = "0" Then Cells(r, a) = Cells(r, a) & Cells(r, b)
r = r + 1
Next i
End Sub
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
I have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I have a data in which I have inserted a table with headers.
I then filter the type of data I want removed from the table using the drop down
Then goto special, visible cells only, press delete.
Now, the data is gone, but when I select all again to pull up the entire table, the data is gone, but rows are still there. So now I have tons of empty rows in between the rows of needed data. Any way of removing the rows in between as well as the data?
I've setup a worksheet whereby rows can be Autofiltered between a start and finish date via a Userform which (after much mucking about with UK/US dates) seems to be working nicely now. With the results of the Autofilter, i wish to count certain entries (in this case entries that are in column F) in the remaining visible rows.
The Workbook is about 'Cases' worked, and column F relates to how the 'Case' is cleared (Call, Letter, Referral). Effectively I want to be able to count 'Call', 'Letter' and 'Referral' entries once the Autofilter has been applied.
I had a situation in which i need to number the cells which start with the Text "SB" in column B. To elaborate,i want to give a serial number for all the transactions starting with "SB". For this i filtered the data >> Custom>>Begins with>>"SB"(Quotes Ommitted). I want to increment the cells with the serial numbers 1,2,3 and so on only those which contain SB. I tried using it with the ROW Function.
View 5 Replies View RelatedI am looking for a COUNTIFS that is only looking only at the visible cells. I have found a few threads on this subject but none for this specific problem.I know there is a SUMPRODUCT / SUBTOTAL excel solution for COUNTIFSing visible cells only. How modify it to take multiple ranges and criteria like CONUTIFS does.
[Code].....
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies View RelatedI have a worksheet with 26 columns of financial data. ACTUAL and BUDGET for each month and year totals for ACTUAL and BUDGET. I've provided the user with the ability to hide months they don't need to see during their current session. For example, if they are working on May, they may choose to hide June through December.
A user has requested Year To Date totals for ACTUAL and BUDGET. I thought this would be relatively simple. Just add two more columns and add up the visible cells.
I got this function from the Microsoft website and it works if I don't add criteria:
I have a spreadsheet with a lot of hidden rows in.
How can I do a count that only counts information in the visible cells?