Copy And Paste Visible Cells Only
Feb 24, 2009
Using Excel 2003 SP3. Trying to copy Visible Cells only from a block of sub-totalled cells. No problem pasting them to a sheet in the same workbook but when I try to paste them to another workbook the intermediate cells are pasted too! Intriquingly, after selecting VC only and copying when I expanded the sub-total block only the previously visible cells were blued out and had the 'marching ants' around them but the intermediate cells must have been copied as well - why? Question is how can I copy VC only into another workbook?
View 9 Replies
ADVERTISEMENT
Jun 17, 2014
i created macro that copies and pastes only visible cells but from specific cell, i.e.
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=2, Criteria1:= _
"Functional"
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=83, Operator:= _
[Code]....
So that range C2341:C3437 is going to differ every motnh - how do i set it to just look from C6 below for those filtered cells?
View 3 Replies
View Related
Apr 12, 2014
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
View 5 Replies
View Related
Oct 4, 2012
Have a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2()
Sheets("GF_Scoring Database").Activate
Dim extvalue As String
Dim rng As Range
[Code]....
View 2 Replies
View Related
Oct 27, 2013
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
View 1 Replies
View Related
Mar 21, 2007
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
View 9 Replies
View Related
Jun 3, 2014
I have a spreadsheet that has many rows of data. I've filtered the spreadsheet, and want to paste a formula so that it appears only in the filtered rows. How can i do that?
View 1 Replies
View Related
Feb 13, 2008
Is there any method to paste a range of cells on visible cells only (ignore hidden cells).
View 3 Replies
View Related
Aug 8, 2012
My goal is to get all numbers that are negative in my A column to be positive.
I filter column A to show only records with negative numbers (there are now hidden cells) (simple example, A2=-1 , A3=2, A4=-3, filter so I can now only see A2 and A4). I insert a column (B) and do "=abs(A1)" and drag that down. This works to get the absolute value of column A into column B, for only the visible records. (so I still only see rows 2 and 4; B2=1, B4=3)
Now the hard part. I want to copy these numbers to column A, but only paste to visible cells. I highlight my data range in column B and hit Alt + ; to only select visible cells. Now I hit Ctrl + c to copy. If I then click on the first cell in column A that I want to paste to and hit Ctrl + V, the data is pasted in all cells, no spaces, filling in the hidden cells, which I do not want (in my example the 1 from B2 goes to A2 and the 3 from B4 goes to A3).
If I select my entire 'paste to' data range in column A (A2:A4), hit ALT + ; to select visible only, and hit CTRL + V to paste, it tells me "This command cannot be used on multiple selections".
AOther postings of seen seem to intimate that my first attempt described here should work (select visible only, copy, then paste), but doesn't! i can copy visible only easily enough, but when I paste, it ALWAYS pastes into all rows, hidden or not.
View 7 Replies
View Related
Dec 11, 2007
After a filter is applied I wish to achieve the following:
Concatenate the contents of the visible cells in columns B2 (down) & C2 (down) and paste to A38 in a sheet called Stats.
Paste the visible cells in D2 (down) to B38 in a sheet called Stats.
View 4 Replies
View Related
Mar 15, 2014
I'm using Microsoft 2010 and as like many others here I cannot find a way to paste into visible cells only i.e. the data I want to add to my variables is only available for every five years, but my data ranges 1990-2010 each year, so I have filtered my data to the 1990,1995,2000,2005,2010 so that I can paste the new data in, but of course it pastes into 1991 1992 1993 etc instead of the filtered results.
I've tried the find and select visible cells only but it says when you try and paste into them that it is not possible for more than one cell at a time.
View 7 Replies
View Related
Jan 9, 2012
I have a data of a large no. of rows with 5 columns. The last 2 columns are district and state. As it is an imported data, in some rows the data has shifted a column, i.e. the name of state is being shown in district column and name of district is being shown in the column to its left. I tried filtering the data such that it shows only those rows where names of the states are coming under district columns and then selecting the whole thing, cutting it and pasting it to the rightmost column. But even the correct district entries got pasted under state column. Undo, the further damage was controlled, but the original problem remains. Now i will have to cut and paste each row or only consecutive rows.
View 2 Replies
View Related
Aug 22, 2006
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
View 5 Replies
View Related
Aug 22, 2006
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies
View Related
Apr 16, 2014
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
View 2 Replies
View Related
May 18, 2009
I'm filtering some data and would like to copy the visible cells. When using the code below, it copies all but four rows...is there a row maximum limit it can copy?
Rows("31:31").Select
Selection.AutoFilter
Selection.AutoFilter Field:=14, Criteria1:="FALSE"
.Offset(1).SpecialCells(xlCellTypeVisible).EntireRow.Copy
View 9 Replies
View Related
Jul 27, 2006
I need a macro that copies a range (example A1... B50) from a excel worksheet to a text file.(txt without the comma) and save the text file with a different name without leaving the excel.
Part of the range had row hidden. Need to save the visible cell only.
View 6 Replies
View Related
Jan 23, 2013
Learn about the "copy only visible cells" when I've filtered down a filter. Now Excel copies that way by default everytime I copy multiple rows when I've filtered. But NOW I want to copy everything that is hidden between the filter as well, i.e. how it did it before.
How can I tell Excel to do that?
View 2 Replies
View Related
Oct 23, 2007
I have data in one column that is the result of a formula, ie: =B2*B3. The result may display a decimal answer that goes out 4 places. My boss likes us to clean this up by using the = ROUND(B4,2). That is fine and easy enough, but the problem is that these numbers maybe spaced throughout a large sheet. I have to filter to make sure similar items are calculated the same way. The problem is that when I copy and paste, it copies and pastes all the data hidden between the displayed cells of the filtered sheet. How do I make it so I am only copying and pasting the data displayed and not the cells that are filtered out in between?
View 9 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Feb 4, 2014
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
View 7 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Dec 19, 2012
I have 2 worksheets, one of them (Sheet 2) has a varying number of rows.
I would like to copy the last 13 rows of sheet 2 and paste them in the last 13 rows of sheet 1
View 2 Replies
View Related
Jan 17, 2007
I have managed to write a program to calculate golf handicaps. However, there is one aspect of the program I would like to improve and request your assistance once more. I have attached a diluted sample. It is very tedious to extract info from the Scores worksheet to the Posting worksheet in that I only know to copy and paste from the appropriate cells. The Posting worksheet will actually have 5 rows per player (as it will list a maximum 20 scores by date in descending order) and needs to be in alphabetical order.
View 2 Replies
View Related
Jun 10, 2009
I have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies
View Related
Nov 23, 2012
I have a sheet that is set up with columns A thru G. In column A is a name and the columns B thru G is just data. How do I cut text thru vba and then paste it to another location.
View 9 Replies
View Related
Apr 16, 2008
The objective is to copy the value from one cell if another cell in the same row is blank onto another sheet (in another excel file if possible). This would have to be done for all value in the sheet.
View 7 Replies
View Related
Dec 25, 2012
is it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies
View Related
Jun 29, 2014
I have code which copies Range("A1") and pastes into Range("c1").Then it loops to copy a2,a3,a4 and pastes in the same cell c1.
I just want to copy a1 and b1 instead of just a1 and paste into cell c1& c2.Then loop to copy a2&b2 till end.
[Code] ......
View 5 Replies
View Related
Dec 7, 2011
show what is the right vba syntax to copy the name of a sheet in order to past it in a cell?
View 5 Replies
View Related
