I manipulated some code found here on ozgrid which works perfectly using the SelectionChange event but I need it to reapply the formatting whenever the cell values are recalculated based on the values manually entered in cells AH20,AI20,AJ20. Simply using the Calculate event delivers an error, so there is something beyond my very basic knowledge that needs to be done. I have an example worksheet on my server here.
View 4 RepliesI have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedThe following is assumed.
I have a base salary of $5k/monthMy PROFIT on hardware sales must equal or exceed my monthly salary in order for me to earn a commission on hardware sales. If it does, my commission is then Profit beyond monthly salary X 25%I also earn commission on software sales. Total Commission is the sum of Software commission plus commission on hardware sales.
Example: HW Profit is $6k. Software commission is $3k.
$6k - $5k = $1k.
$1k * 25% = $250.
$250 + $3k = $3250
However, there are times (unfortunately) when my total hardware profit does not equal or exceed my monthly salary. When that happens, I am now in a negative status regarding hardware commission. The negative status is simply salary minus hardware profit.
Total commission is then that negative number plus software commission.
Example: HW Profit is $3k. Software commission is $3k.
$5k - $3k = $-2k.
-$2k + $3k = $1k
I need a formula in one cell to account for both possibilities.
I am creating a sales per day/week worksheet for my reps to keep track of their sales. I have created the sheet that they only have to enter in what they have sold and it automatically calculates what they have sold per hour in the day, and what that makes their weekly total.
The problem is sometimes they will work 5 days, sometimes 4, sometimes 6 or 7.
im trying to fix the weekly average formula to divide by 7.5 for 1 day worked, 15 for 2, 22.5 for 3, etc all through 7...
this is the formula I have now, obviously it doesnt work
=IF(COUNT(B7:H7)=1,SUM(E42,E75,E110,E143,E175,E207,E238)/7.5,IF(COUNT(B7:H7)=2,SUM(E42,E75,E110,E143,E175,E207,E238)/15,IF(COUNT(B7:H7)=3,SUM(E42,E75,E110,E143,E175,E207,E238)/22.5,IF(COUNT(B7:H7)=4,SUM(E42,E75,E110,E143,E175,E207,E238)/30,IF(COUNT(B7:H7)=5,SUM(E42,E75,E110,E143,E175,E207,E238)/37.5,IF(COUNT(B7:H7)=6,SUM(E42,E75,E110,E143,E175,E207,E238)/45,IF(COUNT(B7:H7)=7,SUM(E42,E75,E110,E143,E175,E207,E238)/52.5)))))))
Here's the table for one game
Date-----Buy(Unit)-----Sell(Unit)-----Net Unit-----Price($)-----Net
Profit/Loss($)
xx/xx----2----------------##--------------2--------------125---------- ##
xx/xx----##---------------1---------------1--------------150---------- ##
xx/xx----##---------------1---------------0--------------165---------- +65
xx/xx----##---------------4--------------(4)-------------170--------- ##
xx/xx----2----------------##-------------(2)-------------165---------- ##
xx/xx----##---------------1--------------(3)-------------180---------- ##
xx/xx----3----------------##--------------0--------------180---------- (10)
Number in bracket means negative.
## means empty cell.
How can I type a formula, so that every time there's no stock left (ie zero net
unit), it will calculate the net profit once.
I need a formula to calculate a total based on two conditions.
See spreadsheet attached.
I need to calculate the difference between two cells that are formated like this: 11/10/2006 13:00. Simple subtract only works when the date hasn't changed (the subtract formula seems to focus on the time and ignore the date).
I found a formula that will work, but the results are in regular numbers, I need the hh:mm format and if I change the format of the result column, the time displayed is wrong.
The formula is=((B2-A2)*1440)/60)
If my result is 122.6 in regular numbers, when I convert to hh:mm I get 14:00.
Is there a better way to do this? Also, is there a way to eliminate weekend & holiday hours from the calculation? This is not as important as getting the results to calculate correctly in the hh:mm format.
Having trouble adding a column of minutes and converting the total into hours and minutes. Say Cell A1 through Cell A18 each have 12 minutes in each cell. I want cell A19 to tell me how many hours and minutes of total time that have elapsed. I have tried hh:mm, [hh]:mm, but nothing works.
View 9 Replies View RelatedI have found this code while searching. I would like to know how to call the vba code only when clicking the button. On much bigger projects Excel has to re-calculate all cells everytime i change a cell value.
View 3 Replies View Relatedi wish to do some conditional formatting. my target for the first 6 months from date activated is 50,000 after 6 months is 100,000. and for those below target, i will need it to be highlighted in red. thus i have 2 sets of conditions.(calculate the no. of months and the revenue).
View 2 Replies View RelatedI'm trying to make a formula to calculate the difference in a date between two dates. For exaple, in my business we have a due day for something. So the due date could be Feb 10, we need to know if it was done on time, late, or early. So I've gotten it to display late by doing this: =IF(B2>A2, "Late", (A2-B2)) But then I can't figure out how to incorporate this: =IF(B2=A2, "On Time") or =IF(B2<A2, "Early").
I would like to displaly this all in one cell. So if the due date is Feb 10 and it's turned in Feb 8 it's early, turned in Feb 10 it says on time, turned in Feb 11 it's late. I also tried this but it didn't work: =OR(IF(B2>A2,"Late")*IF(B2=A2,"On Time")*IF(B2<A2,"Early"))
how to view changes on my spreadsheet.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
Hi1Tasks23-Apr-09Inercona.Trial1
b.Trial2
Tasks23-Apr-09Enercona.Trial1b.Trial2
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click()
Dim i As Integer
Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "")
If Results = vbOK Then
With Sheets("Sheet1")
i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1
.Cells(2, i).Value = Now()
i = i + 1
End With
Else
Range("A1").Select
End If
End Sub
Regards,
Kevin
I am setting up a spread sheet to calculate call duration it would be a great help if data could be entered using one hand IE use decimal point on the number pad instead of the colon is this possible. I will need to subtact start time from end time to get the duration
View 9 Replies View RelatedI m trying to do is this. For every person in company there is a table 30 days (cells) long, and 3 shifts (cells) wide. Every shift leader fills in the data in the "calendar" so every day, for every person, he will fill in number of hours.
I have to make excel process the whole calendar 30 x 3 = 90 cells, into final results for our payroll department. So the end product of the excel table should be Person name, total work days, total sick leave days, holiday days, and so on.
specific problem i have is how to calculate number of State Holiday days. You can see my best attempt in the attached file.
if there is only one number / mark entered each day (in only one of the 3 shifts) thansumproduct works ok.
I would like to conditionally format a column of cells such that it formats when a cell's text equals to that in another column.
Example, in column A I have
1 Cat
2 Dog
3 Mouse
...
In B I have
1 Chicken
2 Mouse
3 Monkey
...
58 Cat
Based on the B column I would like to highlight A3 Mouse and A1 Cat.
Additional complexity, In B I have
1 Chicken Mouse Dog
2 Rat Monkey Fish
3 ...
Given that this is the format I have the text in how would I search column A and conditionally format A2 and A3.
I am having trouble with a conditional format of a date. I need it to turn the date red if it is 35 days older than today.
View 3 Replies View RelatedI have a conditional format that I wanted to add another argument to, but although the statement is true, conditional format will not toggle.
My original argument was:
Maybe I'm getting a blank, maybe the answer is so easy, but lately I canīt solve this: How do I use conditional format to change cell color if cell value (date) is not workday?
View 4 Replies View RelatedIn column B I could have blank, text or text containing the word "track" or "Track". In column C I could have Blank, "yes" or "Yes" or "no" or "No"
Only if B text contains "track" or "Track" and/or C contains "yes" or "Yes" I want to conditionally format B.
This does not work:-
=OR(FIND("track",B1,1),FIND("Track",B1,1),C1="yes",C1="Yes")
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
is there a way to have a cell display a certain text if it is empty?
i.e. i would like all the blank rows in a section of my spreadsheet to have a grey fill and display the text "Please input your description here" if the cell is blank.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
View 9 Replies View RelatedI m creating a sheet in excel where I need to do some conditional formatting but need more than 3 rules so i'm guessing i'll need to use some vb code.
Basically I have a range of cells say from c12 to ag15
These cells all have formulas in linking to other cells in other sheets.
Tha values that will be in them are as follows: s, h, hd,ooo,z and maybe 1 or 2 more will be added later. I need the cells background and text colour both to change to a colour depending on the value in the cell.
eg. cell value = s then background and text colour both to be yellow.
Need multiple conditional format for more than 3 condition. I don't know how to write code in VBA.
View 5 Replies View Related