Conditional Format For Low, Mid & High
Jun 13, 2007
Sorry I don't mean to bring up old post of mine but my boss wanted me to change how this works. I have placed a link to the old post of mine in hopes that it may help. Instead of having two conditions that turn green, he wanted to combine those two, have the lower turn red and the higher turn yellow. Still only three colors but I am unfamilar with how these conditional formats work.
View 9 Replies
ADVERTISEMENT
Aug 14, 2008
I have an interesting problem (I hope you find it interesting too). I'm trying to find the historical "high" day of the week for a particular stock I follow. I searched for several hours but was honestly unable to make any progress. Normally I do my own formulas, so other than pasting a rare macro, that's pretty much the extent of my (lack of) experience, ie please assume I am a novice....
View 9 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Feb 9, 2010
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
View 2 Replies
View Related
Apr 12, 2012
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
View Related
Mar 20, 2013
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
View 3 Replies
View Related
Jul 6, 2006
I would like to write a function that enhances conditional formatting capabilities in this way: suppose that cell(4,5) contains a number that can be 0 to 5
in the adiacent cell(4,6) i want to put a function that:
1) write "NO DATA", "HIGH", "GOOD", "MODERATE", "POOR", "BAD" depending on that value
2)Choose color font depending on value
3)Choose color background depending on value
I wrote this piece of
Public Function StatusResponse(AdiacentCell As Range) As String
Dim thisStatus As String
Dim ThisFontColor As Integer
Dim ThisbkColor As Integer
Select Case AdiacentCell.Cells(1, 1)
Case Is = 0
ThisbkColor = 2
ThisFontColor = 1
StatusResponse = "NO DATA"............
View 2 Replies
View Related
Feb 9, 2009
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies
View Related
Mar 4, 2007
I am trying to calculate the 52 day high/low for a stock in excel.
View 9 Replies
View Related
Mar 28, 2009
I have the following table...
NameQuestions correctQuestions WrongENTERPositionNameQuestions correctQuestions WrongPoints1dave6216203ben531240506jan712070809dan802410011fred44812tom354
When the data is typed into the top box, I have a macro for the "enter" button that places the data into row 12.
What I really need is after the data is placed into row 12, is for the table to be sorted highest points to lowest points, and if scores are the same then in alphabetical order.
This is my macro......
Sub Results()
Range("C9:E9").Select
Range("E9").Activate
Selection.Copy
Range("C23").Select
ActiveSheet.Paste
Range("C9:E9").Select
Range("E9").Activate
Application.CutCopyMode = False
Selection.ClearContents
End Sub
View 9 Replies
View Related
Apr 22, 2014
how to view changes on my spreadsheet.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
View 2 Replies
View Related
Dec 16, 2008
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
View 4 Replies
View Related
Apr 24, 2009
Hi1Tasks23-Apr-09Inercona.Trial1
b.Trial2
Tasks23-Apr-09Enercona.Trial1b.Trial2
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click()
Dim i As Integer
Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "")
If Results = vbOK Then
With Sheets("Sheet1")
i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1
.Cells(2, i).Value = Now()
i = i + 1
End With
Else
Range("A1").Select
End If
End Sub
Regards,
Kevin
View 9 Replies
View Related
Oct 1, 2009
This is for a forestry contest. Students compete in 6 different categories (columns B through G). Teams can have up to four members and the top three member scores are taken to determine a team score. Teams are then ranked. Here is where I need help. I would like to be able to find the high individual score for each category in the contest. (sawlog, pulpwood, tree ID, etc) If there is a tie in the category it is broken using the category in the column to the right. Example – sawlog 1st tie breaker is pulpwood, the 2nd tiebreaker is thinning. The last column, Compass, uses sawlog as 1st tie breaker and pulpwood as 2nd tiebreaker.
Example
Will on the RHS team had a score of 112 in Tree ID and a score of 48 in thinning.
Michael on the WHS team also had a 112 score in Tree ID and a score of 44 in Thinning.
So Will is the high individual in that event –
How can I create a formula that will bring the winners name down to row 66-71 and also bring the score down to row 66-71 to show who won each event? example spreadsheet attached.
View 3 Replies
View Related
Jun 6, 2009
I seem to find myself stuff on this project yet again, JBeaucaire was able to help me to get this far im hoping you will be able to help me with the next step of this project
The doc iv attached is able to give me the differnece between low and high numbers with this example low numbers being between 1-18 and 19 – 36 high numbers and 0 being a break if u test the project u will understand im now trying to create a pattern of 3s were im abe to get stat hits on for example the patterns of 3s are the following(numbers) low,low,low-low,low,high-low,high,high-low,high,low every time I type in the numbers 3 times in a row on the 3rd one I want it to show as a hit(success) if the 3 numbers I type in are not a hit like high,high,high I want it to show me a miss if it is a pattern I want it to show a if theres a 0 it must rest like from 0miss,4hits,o breaks to 0miss,0hits,1break and so forth im also wondering if at another part of the form it can keep the total stats like iv added In the doc
View 14 Replies
View Related
Jan 4, 2008
I have voter registration pdf where I can open the table of info into excel when I can edit it. When I try to sort the addresses from low to high. example I have 3 main st, 20 main st, 78 main st, 300 main st. When I try to use sort to arrange them from low to high it does not work correctly do you think I am having a problem when adobe opens it to excel or am I doing something wrong?
View 9 Replies
View Related
Jul 8, 2007
I am analysing market data to determine when trades should take place and when they should be closed. This works well. But I need to find the intermittent high value between the dates for purchase and the closing trades, and then insert these values in column S in the attached worksheet.
I don't know if a function can find these values or if a macro is needed (or if I should amend the existing macro that currently finds the
closing trades).
This macro is included in the attached spreadsheet. It Is:
....
View 9 Replies
View Related
May 14, 2014
I would like to conditionally format a column of cells such that it formats when a cell's text equals to that in another column.
Example, in column A I have
1 Cat
2 Dog
3 Mouse
...
In B I have
1 Chicken
2 Mouse
3 Monkey
...
58 Cat
Based on the B column I would like to highlight A3 Mouse and A1 Cat.
Additional complexity, In B I have
1 Chicken Mouse Dog
2 Rat Monkey Fish
3 ...
Given that this is the format I have the text in how would I search column A and conditionally format A2 and A3.
View 4 Replies
View Related
Aug 21, 2014
I am having trouble with a conditional format of a date. I need it to turn the date red if it is 35 days older than today.
View 3 Replies
View Related
Sep 9, 2008
I have a conditional format that I wanted to add another argument to, but although the statement is true, conditional format will not toggle.
My original argument was:
View 14 Replies
View Related
May 26, 2009
Maybe I'm getting a blank, maybe the answer is so easy, but lately I can´t solve this: How do I use conditional format to change cell color if cell value (date) is not workday?
View 4 Replies
View Related
Jul 12, 2009
In column B I could have blank, text or text containing the word "track" or "Track". In column C I could have Blank, "yes" or "Yes" or "no" or "No"
Only if B text contains "track" or "Track" and/or C contains "yes" or "Yes" I want to conditionally format B.
This does not work:-
=OR(FIND("track",B1,1),FIND("Track",B1,1),C1="yes",C1="Yes")
View 5 Replies
View Related
Aug 29, 2013
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
View 3 Replies
View Related
Dec 9, 2013
is there a way to have a cell display a certain text if it is empty?
i.e. i would like all the blank rows in a section of my spreadsheet to have a grey fill and display the text "Please input your description here" if the cell is blank.
View 8 Replies
View Related
Apr 23, 2007
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
View 9 Replies
View Related
Nov 26, 2007
I m creating a sheet in excel where I need to do some conditional formatting but need more than 3 rules so i'm guessing i'll need to use some vb code.
Basically I have a range of cells say from c12 to ag15
These cells all have formulas in linking to other cells in other sheets.
Tha values that will be in them are as follows: s, h, hd,ooo,z and maybe 1 or 2 more will be added later. I need the cells background and text colour both to change to a colour depending on the value in the cell.
eg. cell value = s then background and text colour both to be yellow.
View 12 Replies
View Related
Feb 12, 2010
Need multiple conditional format for more than 3 condition. I don't know how to write code in VBA.
View 5 Replies
View Related
Dec 14, 2011
I want to add a Conditional format to my vba. I've got 2 columns with dates in it and I want to highlight the whole row if the date it greater and less then todays date
I'm looking for
for all active cells
column date 1
=$j2<$L$1 blue for less (this data then tells us thats it's unacknowledged)
column date 2
=$K2<$L$1 red for less
=$K2=$L$1 red is the same
(this data then tells us we need to chase these items)
View 8 Replies
View Related
Jul 12, 2012
I'm trying to set up a conditional format using a two way lookup. The chart is 15 colums across and perhaps 500 down. Index / Match functions do find the correct value - BUT - the challenge is there ARE duplicate values in either the column or row that are "all" getting highlighted with the conditional format (color a cell).
View 3 Replies
View Related
Apr 12, 2013
I want to apply conditional formatting in a cell based on the contents of another cell. I can do it if I just want it based off 1 condition (=b151="sample") but would like to if it met 1 of a couple possibilities.
For example, cell H151 I would like to fill green if cell B151 contained the text "sample" or "example". B151 has a list box with about 10 possibilities but I only want a few of those to turn H151 green.
View 3 Replies
View Related