Conditional Formatting- Extending To Whole Row
Feb 15, 2010
Using the oldest version of Excel (200) I have to insure all members of our squad can utilize this function. Trying to format a whole row based on one cell in that row that reports number of days till the next physical. My formatting works correctly for the initial cell, but does not extend correctly to the rest of the row. I am using the "Cell value is" option. I used:
Cell value is between 1 and 365 - color green
Cell value is between 0 and -30 - Color Yellow
Cell value is between -31 and -365 Color Red.
All cells with no value in it are yellow, even if the original formatted cell is another color and the cells that have other data in them such as the physical date, have no color in them regardless. read and tried several approaches from other threads with no good results. considering the results from those threads, I am curious if it has to do with it being an older version.
View 3 Replies
ADVERTISEMENT
Jan 30, 2010
use of SUMPRODUCT and what I believe is called a double unary operator (--). Here's the original post with Paul's solution:
http://www.excelforum.com/excel-gene...-new-post.html
I've since discovered that a previously unknown column of data (I'm transcribing data from paper documents) needs to be included in the calculations. Specifically, the new column of data (shown in yellow in the attached example) has to be taken into consideration when counting product quantities. An explanatory pseudo code statement, also appearing in yellow in the example sheet, describes.
View 2 Replies
View Related
Sep 16, 2013
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
View 2 Replies
View Related
Mar 20, 2013
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
View 3 Replies
View Related
May 5, 2009
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
View 5 Replies
View Related
Jul 5, 2013
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies
View Related
Jul 27, 2007
I have a formula IF(A2=A1+1;B1+1;1) that I need to develop further, so it can recognise same date for same patient, so it doesn't start back at 1.
e.g. ( see attachment) In column B are real dates( 01.09.10-01.09.12, trough my formula => day 1,2, 3). What I need help with is to make the formula linked to column C so that if there are more of same date in column B( because of several different analyzes taken same day of the patient-column E) fore example several 09.10.11 should be recognized as day 2 all of them for the same patient, and if a new date follows for a new patient it should start back at day 1.
This is so I can make a diagram of my analyzes taken at the ICU, the problem is that my research is during 3 years and because of that I have different dates of analyze, and I need them to be comparable so that the day that they arrive changes to day 1 and so on.
PS! I have made an example were I have changed the patients IDs and taken away unnecessary data.
View 11 Replies
View Related
Feb 9, 2009
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies
View Related
Jan 13, 2014
How can I extend a table backwards my table starts from column B and i want to make it from column A to make it start from column A that is, if its possible.
I have uploaded my workbook : Stock Request - Copy.xlsm
View 1 Replies
View Related
Dec 22, 2009
i have a calendar with the dates in a row
I want to count instances of an entry under the dates using 'countif' from 01JAN until today.
My problem is that today changes value [up by one] each day so the 'countif' function will need to extend its range to the right by one cell each day.
View 11 Replies
View Related
Oct 19, 2012
I imported my data and I have a macro that updates the data. Nothing new until new items were added, creating new rows at the bottom and now the Table Format does not include these rows. There are so many formats available that I don't want to guess which one I used when I created it I just want to extend the data range.
I do not care if this is done through the macro or right on the sheet as this does not happen that often.
View 3 Replies
View Related
Nov 24, 2009
I'm having a problem with a dynamic range. I've re-checked my formula at least 10X and its syntax is correct. The problem is the dynamic range stops short 3 rows up from the last entry.
View 9 Replies
View Related
Dec 7, 2006
If I have a sum function that adds up:
= SUM(U41:U45)
but I add a row at 41 I now get sum function
=SUM(S42:S46) when I really want it to incorporate the just add row to look like this:
=SUM(U41:U46)
View 3 Replies
View Related
Apr 25, 2014
VB recorder in Excel. The macro is designed to process a spreadsheet that will have the same number of columns and same type of data in each column, process this data with a formula (hat tip: AlKey+XOR LX) and then clean up the columns ready for use in another program.
I have got it working but when I alter the row length the macro only works to the final row in the recording spreadsheet. I realize this is because when recorded the macro I told VB to set the range to a given row.
I remember there is a way of setting the Range function that tells VB to always go to the bottom of the rows filled with data but I can't find it for the life of me.
see the attached file the training spreadsheet.
[Code] ......
DdSample_training_data.xlsx
process.docx
View 4 Replies
View Related
Jul 8, 2009
I want to extend a formula like so- =Sheet2!M3
=Sheet2!M60
=Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
View 4 Replies
View Related
Nov 14, 2008
I work in Local Government and I am recording the contact that we receive for each transaction that are avoidable or unavoidable. This is broken down into service areas.
The data is imported into excel from a database and therefore is constantly growing.
What I want to do it a very basic summary page so that I can group those that are and those that aren't avoidable for each service.
Because the data is ever expanding I would like this on a separate sheet from the actual data.
I attach a sample of the worksheet and would be grateful if someone could advise what formula to use on sheet 2 in cells c4, c5, d4 and d5 to make it do it automatically.
View 5 Replies
View Related
Aug 21, 2008
I have a Line Graph with 2 lines on it. Is it possible to write a macro to extend the range (Source range) of one of the lines ? I would also like to add a Data Label to the newly added point.
For e.g. If I have Line 1 graph only till 65, I want the macro to extend the range by one row to include 95 and also display a datalabel ......
View 9 Replies
View Related
Nov 18, 2008
I have a list (external), which will be updated every month from an external source with new numbers and possibly a new size. This will be a count of services people use. On a 2nd sheet I need to allocate a cost to these services (pivotdata). This works fine if the list stays the same size, but it most probably won't so I need it to update automatically, not manually extending the list on the 2nd sheet. In brackets are the named ranges of the data in the spreadsheet.
View 5 Replies
View Related
Feb 9, 2009
However I only put in a small price list when i tried extending it the workbook produced error as per attached. I thought i would just need to amend the row numbers but it doesnt seem to work
unable to upload at present but prevoius is available on this thread. http://www.excelforum.com/excel-work...hoice-sum.html. Need to extend price list to cover up to 10,000 lines
View 5 Replies
View Related
Nov 16, 2013
This is what I am using:
=VLOOKUP($A5,TEAM!$B:$MZ,23,FALSE)
When I select the cell formula extension button thing and drag it to the right, the formula copies exactly into the next cell. If I select multiple cells starting from 19-23 and then drag, excel just repeats the formula over, (19, 20, 21, 22, 23, 19, 20, 21, 22, 23, 19, 20...) This is seriously frustrating as I have to click into the formula bar on each cell and change the value of the column lookup.
I can't keep going manually as I need to go to about 300 cells...
View 9 Replies
View Related
Dec 9, 2008
In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
View 14 Replies
View Related
Mar 5, 2009
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies
View Related
Dec 23, 2009
I seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
View 3 Replies
View Related
Nov 11, 2009
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies
View Related
Feb 3, 2010
I have two spreadsheet "book1" with data in it, "book2" that takes all the information from "book1" the cells are linked in "book2" from "book1" so when someone updates "book1" the information is viewable in "book2"
In "book2" where I am getting stuck is as follows,
Column A contains data "break time" that is formatted in HH:MM:SS column B contains a "total duration" in HH:MM:SS. what I need to do is if column A data is = to or more than 4% of column B then I want to turn the cell in column A "red" if it is less then turn it "green". I have tried conditional formatting and it appears to work the once only, I dont no if this is because its 2003 and not 2007??
What I need is to repeat the conditional format over and over again forever is there any code for this I can use?
View 9 Replies
View Related
Oct 31, 2008
I have used conditional formatting various ways to format an individual cell. I was wondering does anyone know if it is possible to conditionally format a row? Eaxmple: If D7=Manager, then format A7 through Z7. If so, how would I go about setting that up?
View 3 Replies
View Related
Dec 15, 2009
I'm wanting to create a formula in column B that will return a value of 10 if column A is any value between 70% -100%, will return a value of 5 if column A is any value between 50% - 69%, and will return a value of 1 if column A is any value between 1% - 49%. Can you help me?
View 6 Replies
View Related
Oct 29, 2013
I want to do an if (I think I do??) command so that if a1=b1, then the cell turns blue and if a1=0, the cell turns red, with the false statement just being blank.
View 3 Replies
View Related
Apr 21, 2014
I have data in column B.
And if the below mentioned values are present in column "B" then the cell colour should change to "RED Colour"
Bombay
Mumbai
Bangalore
if any other values other than the above mentioned then the cell format should remain as is.
View 1 Replies
View Related
Jun 11, 2008
I have my formulas in place and they are working. The reason why some are coming up with #DIV/0 is because I do not have the data to complete the calculation.
Is there a way to make the #DIV/0 error go away until I imput the data to complete the calculation? I was thinking there might be a way to do it with conditional formatting.
View 9 Replies
View Related