Conditional Formatting Groups Of Data
May 28, 2014
I have a spreadsheet with data in a table with order numbers in column A. Although each order is given a unique number, the data populates with multiple rows, one for each line of the order, all with the same order number depending on how many lines where on the order (which is generated via other software and cannot be altered). Therefore the data, when sorted by order number, appears in groups:
[URL] .....
Is it possible to conditional format each line in groups of the same order number to make it easier to differentiate between each individual order which will still work when the data is sorted or filtered?
View 2 Replies
ADVERTISEMENT
Feb 2, 2010
Is there a way to do the following using conditional formatting?
I need to have all duplicates highlighted.
For example (Since "Ana M." is the first) highlight both rows (or at least the group of "Ana M." cells in the column, entire row not necessary)
Highlight:
Ana M. 12 A St 333-3333
Ana M. 23 Z St 333-3333
Skip:
Jane S. 12 A St 555-5555
Jane S. 15 Z St 555-5555
Highligt:
Sam A. 55 A St 222-2222
Skip:
Tony J. 45 A St 444-4444
Tony J. 11 B St 444-4444
Tony J. 66 Z St 444-4444
View 9 Replies
View Related
Nov 24, 2005
This is my problem:
A list with numbers in column A, these numbers can be used over multiple rows, sometimes 3, 5 or more/less.
Every time this number changes, the color for the entire row should flip between yellow and no color.
Sequence of the number in column A is not always odd / even. I tried various suggestions regarding this topic but I do not get it straight.
View 9 Replies
View Related
Nov 4, 2008
On this particular formula but my colleagues have informed me that they require cells with no dates in to have no colour fill. Firstly, I have searched and tried myself with no success on stopping the below formulas from filling empty cells with red, they are as below;
Code below for 11 months after entered date:
View 2 Replies
View Related
Jun 8, 2009
I am trying to colour a whole row of data (in columns A through to AA) based on the numeric entry in column AB. The numeric entry is either 1, 2 or 3. I reckoned I needed to use the IF function, but as writing formula is not my strong point I am struggling to enter the correct data! The first row of data I wish to use is 3. I have tried the following but to no avail: =IF($AB3,1). =IF($AB3=1). =IF($AB3="1").
View 5 Replies
View Related
Mar 5, 2012
I am using the simple conditional format "Data Bar" to make a progress bar, going from 0-1 (0-100%), works fine .5 is halfway...ect. but what i would like it to do is to change to a different colour only when it reaches the 100% or 1 in this case so you can see quickly that this progress is complete.
View 7 Replies
View Related
Jan 14, 2010
I am using Data Validation for my drop down list, using “List” and “source” =$A$132:$A$159 along with Conditional Formatting that changes different fill colors, depending on selection. Is there a way to use VBA with a command button that when selected would give the user a dialog box so that they could enter additional comment that would be added to existing list and would also be able to select a fill color for that new selection.
Below I have a recorded Marco to give an idea of what I would like to achieve, but of course using a input box of some sort to make selections of text and color
Also I'm using Excel 2007
View 14 Replies
View Related
Jan 24, 2014
On one of my excel spreadsheets I have someone's name and a drop down list of "subscribe" or "unsubscribed" in the next column over:
Name
Company
Subscribed?
Name1
amazing company
Unsubscribed
[Code] .......
I have their names in column A on another sheet and a load of contact details and details on subscription price etc. I want to be able to conditional format these rows of details according to if they are subscribed or not. I'm struggling to come up with a formula that works and the conditional formatting menu isn't working much.
View 5 Replies
View Related
May 21, 2009
I have conditional formatting for a range of cells eg. =COUNTA(AC3,AD3,AE3,AH3)
It is currently set so that cell A3 changes to Green if AC3 is populated, Red if AD is populated, Orange if AE3 populated & white if AH is populated.
AE3 has data validation (Yes or No).
I need AE3 to change to White if no is selected and Orange if Yes is selected.
View 9 Replies
View Related
Jul 13, 2006
I searched, but couldnt find a thread which covers a VBA code which covers writing a conditional format into cells and changes each time contents of the cell are refreshed. The conditions are:
If activecell.value < 0 Then
.interior.colorindex = 3
If activecell.value >=0 Then
.interior.colorindex = 4
and i want this to happen for a big range of cells (range(a1:k1500) So basically, once the macro is run(which has the code to insert the conditinal formating for all the cells), if the user makes any change to the cell(within the range), the color of the cell should change automatically(like Conditinoal formating works by default). Prior to this, i was doing my cell coloring using the 'for loop' approach, but that of course does not reflect once the macro has ended.
View 2 Replies
View Related
Jan 29, 2014
I would like to be able to change the color of fill in a cell if there are 3 occurrences in cells. Attached is a sample.
In the attachment, if the cells A2, D2, G2 all have a number "1" in them I would like cell K2 to have a color fill for the cell.
The same would be for the other cells, if B2, E2, H2 all have the number "1", K2 should have a fill in the cell as well, same as if C2, F2, I2 have a number "1", fill K2.
I only want the fill color to be in cell K2 if all 3 of the cells, ex: A2, D2, G2 have a "1" in them. Also, some of the other cells may have a number "1" in them but I would not want them counted unless it is 3 of the consecutive cells.
View 7 Replies
View Related
Jul 24, 2009
I have column of cells, both of with have drop down menus to select information from. I have an adjacent cell to display an error based on conditions. Is there a way to have conditional formatting to apply to the cells with Data Validation to change the color, based on the error. I have tried using the Conditional Formatting options but it still does not change the color of them. I believe i have to use the formula option, but not exactly sure what to put, i know a if statement could work but unsure on how, there are only two conditions that i would need for it to apply, if the adjacent cell has an error, and when it does not. Is this possible?
View 9 Replies
View Related
Oct 13, 2009
I am trying to conditionally format some data in cells A3:A6 (shade the cells) depending on whether a number in B1 is 1 (green), 2 or 3 (blue), or 4 (red).
View 3 Replies
View Related
May 19, 2008
On sheet 1 I enter data such as:
Visit Date | Customer Name | Customer Number | Job Number | Product
On Sheet 2 i have a list of our 130 products which would be similar to '1130Tots Standard 24" ' I have made these as a list so we can choose from the list using data validation.
Now, out of the 130 products we have about 4 main different Catagories - Tots Direct, Tots RTS, Direct, RTS. - I could put what category they are in in a column next to the list on Sheet 2.
What i would like to happen is if e.g. a product is chosen from the drop down list, it could look in the cell in the column next to it and see what Catagory it is in and format the entire row on Sheet 1.
E.g. Direct changes colour to grey, Tots RTS to Pink, Tots Direct to Grey/Pink stripes, RTS stays standard no colour.
A bit of a development on a question i asked last week to cut out another stage. Currently people have to enter the product, then choose in the next column whether is is Direct, RTS, Tots Direct, Tots RTS then conditional formating will colour the rows. - Want to know if it is possible to do this all in 1 go by selecting the product from the list.
View 10 Replies
View Related
May 30, 2007
I have an Excel workbook that has a data connection to a Sharepoint List. I have 4 columns showing the quaterly status of a project. I want to apply conditional formatting based on the value in the column. I have 5 possible choices so I have to use VBA code to accomplish this because of the limit of 3 option in Excel. I am using this
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Set rng = Intersect(Target, Range("X:AA"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "1"
cl.Interior.ColorIndex = 4
Case "2"
cl.Interior.ColorIndex = 6
Case "3"
cl.Interior.ColorIndex = 3
Case "4"...............................
View 3 Replies
View Related
Jul 17, 2012
I have 2 worksheets. One has locations with numbers, example:
275 Location 1
276 Location 2
I have all my locations on the second sheet, but in 2 different columns, listed with numbers only, example:
271 275
272 300
I have 2 scenarios I need help with.
1st:
If any of the numbers on sheet 1 match the numbers in column 1 on sheet 2, highlight the number on sheet 1 in green If any of the numbers on sheet 1 match the numbers in column 2 on sheet 2, highlight the number on sheet 1 in red
2nd:
If the number on sheet 2 matches any number on sheet 1, highlight green
I want these to apply to all the cells that have numbers (it could apply to all cells I guess as it should ignore it if it doesn't match, I would assume)
View 7 Replies
View Related
Apr 9, 2014
how to make conditional formatting for border line (top & bottom) after repeat 5 data/text ....
it's possible with CF formula and do not vba?
see my excel file attached..
View 4 Replies
View Related
Nov 4, 2012
I have a spreadsheet where I have a column of dates and I want conditional formatting to highlight the cell red if the date is less than or equal to today but if the cell is blank to do nothing.
At the moment I have the following formatting applied using the "format only cells that contain" option I have cell value less than or equal to =TODAY() except that obviously highlights every cell red that doesn't contain a date. Is there another conditional format I can apply in addition to this that will not highlight the blank cells ?
View 4 Replies
View Related
Feb 6, 2014
Refer to attached sheet. I have 2 sets of data to compare.
B4:H30 and K4:Q30
Compare B4 with K4,C4 with L4 and so on.
If any data is not equal then highlight.
Compare Data.xlsx‎
View 3 Replies
View Related
Feb 7, 2014
I work with some stock index data and I would like to get rid of some dots and empty spaces etc. I used conditional formatting and changed the font color of all the values I need. When I try to sort them based on font color (in order to delete the empty spaces/dots) Excel does not do it. "Go to...conditional formatting" also doesn't work.
View 5 Replies
View Related
Jun 4, 2013
I have a pretty simple spreadsheet (because I'm not an expert on excel) to track temp staffing requirements each week over a year. It only has about 150 rows and a bunch of columns but when I try to make it bigger (add more rows so I can put about 70 staffing positions instead of 19) it will not save (cannot save all of the data and formatting). I have read on the microsoft site that there are limits to data formatting, but it describes over 2000 rows?
View 3 Replies
View Related
Dec 12, 2012
I have a table that is a list for validating values in a column .what I want to do is instead of getting an error message anf stopping if the entered value is not valid the cells become red.
View 6 Replies
View Related
Mar 25, 2013
How do I do "conditional formatting" to high light the numbers which bigger than average + 2 * stdev in a data group?
View 4 Replies
View Related
Dec 15, 2009
how to create a conditional formatting formula that looks like this..
"If A1 is equal to DATA highlights greater than zero on cells A2 to A1000.
View 9 Replies
View Related
Apr 11, 2014
I'm running into a problem when trying to use INDIRECT in combination with Conditional Formatting Data Bars.
Basically I want to show a Data Bar in a certain cell based on the value from another cell.
It would be easy if I could simply copy the value from the other cell across into the cell in which I want to show the data Bar. Unfortunately I cannot do this as the values in the cells where I want to show the Data Bars can change.
As a solution when using Conditional Formatting Data Bars I figured out I can simply do the following:
> Under 'Minimum' use 'Type': Number with 'Value': Zero.
> Under 'Maximum' use 'Type': Formula with 'Value': =INDIRECT("B'&ROW())
This will pick up the value up from column B in the same row.
> In column B i then have this formula: =A1/C1. In C1 i have the percentage that the Data Bar should be using. By dividing the value in A1 with this percentage B1 will return a value that is used for the "Maximum" setting which will then ensure the Data Bar will display correctly.
For example: If A1 value is 4 and C1 value is 25%. Then the formula in B1 will return value 16. The scale used for the Data Bar is then 0 to 16. Seeing the value in A1 is 4 the Data Bar will correctly show 25%. If I then change the value in A1 to say 2 the scale used will change to 0 to 8 and the Data Bar will still be showing 25%, which is exactly what I'm after. So effectively this means a value from another cell is used to work out the Data Bar.
So all is fine up until this point. The problem arises when I want to apply this same logic to the rest of the column.
If I change the 'Applies To' to the range I want it applied to all the "Maximum" will only be based on the top row value. I'd expect cause I'm using the INDIRECT reference with ROW() it would have picked up the values from each individual row. I could create a new CF rule for every row, but that's not practical as there are way too many rows.
Why does the INDIRECT function with ROW() not work in this case? How to make the CF rule copy down properly?
View 3 Replies
View Related
Jun 9, 2009
I would like to use conditional formatting verify that the lines of data being pulled from my application into Excel, but totaled using "=sum" are equal to totals pulled directly from my application. I believe that I should be able to use conditional formatting but am not sure how to make the formula work correctly.
To illustrate my problem: I have cells A1 (a total of a range), A2 (also a total of a range) and A3 (total of data pulled directly into my Excel report). In cell A3 I would like to verify that lines A1 + A2 - A3 = 0. This I can do without any problem, but there is rounding involved. The total of the above formula should be between -1 and 1 and still show as correct. I want the number in A3 to show up in red/bold when incorrect.
View 6 Replies
View Related
Sep 27, 2013
I'm using Excel 2010.
I have created a spreadsheet with 3 month inspection schedules on using the formula below.
=DATE(YEAR(C50),MONTH(C50)+3,DAY(C50))
I then copy this in to a cell where I want the date to appear... and then in to another cell where I want a further 3 month date to appear. Obviously changing the cell reference.
I would like the formula to ignore the very first cell "C50" if there is no date inputted in this cell.
View 2 Replies
View Related
Apr 1, 2014
I'm using Excel 2010 on my Mac. I would like to set up the data as follows:
A
B
C
D
E
F
NAME
DATA X
DATA Y
DATA Z
DATA XX
DATA YY
NAME
90%
88.2
410
88.4%
97.8
[Code] ........
Now what I would like to do is have the data in each column highlighted a certain color based on specific ranges. For example in Column B I want anything from 92% - 100% highlighted blue. I would like 83% - 91.9% highlighted purple, and anything under 83% highlighted red. Do I need to have a conditional format entered in each cell? Can I set up a conditional format for the whole column? Once I can figure the formatting in my example the remaining columns will be a breeze since they will be set up in the same manner just different number ranges, same colors will apply.
View 2 Replies
View Related
Feb 22, 2013
I have a spreadsheet filled with formulas that depend on a value being entered into A2, A3, A4, etc... So column A starting at A2 is where I will manually input a number and the formulas I have in columns B, C, and D will import information from another sheet based off what is put in column A. In column D the formula I have to import data
is =IFERROR(VLOOKUP(A2,Master!C:M,11,0),"").
This will import another number. Additionally in column D, I have conditional formatting that will return a red, yellow or green light based off the rule I have in place. Everything works fine, the only problem is that column D has a green light all the way down even without a value being placed in column A. I would like to find out a way to keep the cells in column D blank until a value is entered in column A. Also, if I go back and delete the value in column A, I would like the corresponding cell in column D to go back to blank as well.
View 2 Replies
View Related
Dec 2, 2008
The macro firstly formats the data that is pasted into it from an access database, then it does some calculations to determine when 10 working days from a specific date is, and when 20 working days from the date is (these go in new columns at the end of the data). The macro will also add new columns which say "Not resolved" if there is no date in the Resolution column, "Yes" in the "10 working days met?" column if the condition is met and the same for 20 workings days in a different column. As the colouring etc takes a long time I really wanted to add as conditional formatting to the macro!
how to attach a spreadsheet here then I can show you what the outcome we want is. A point to note is that there is not a set number of rows each time we do this, and I don't just want 1 cell to be coloured - I want to specify which cells in the row are coloured depending on the results in another cell on that row.
View 2 Replies
View Related
