Use Code To Reference Variety Of Other Cells
Jan 6, 2014
I am building a spreadsheet that references 'LHA rent rates' listed in other cells.
Example table
Bed rate Code: LHA per week:
0 - £55.00
1 - £91.85
2 - £109.61
(Ie two columns with six cells. The first number before the dash are in a separate column. Each of these £ amounts will be in a separate cell.)
In another part of the sheet, i want to be able to type '0' in Cell 1, and this will trigger a formula in Cell 2 to retrieve the correct £ amount i.e., £55.00 in the 'example table' above. Likewise if i change Cell 1 to '2', then Cell 2 automatically updates to £109.61.
I think this would be a long IF formula in Cell 2, but how to do it.
View 3 Replies
ADVERTISEMENT
Aug 7, 2012
I am attempting to modify the code below to, not only reference the ".Item(rCell.Value)", but also include it's formatting. The format for that referenced cell will not necessarily be a "certain" format..so I don't want to have to write out what specific formatting needs to happen.
VB:
If (.exists(Trim(rCell.Value)) And rCell.Offset(, 1).Value = "") Then rCell.Offset(, 1) = .Item(rCell.Value)
The entire code is as follows:
VB:
Sub FillVariablesOnlyBlanks()
Application.ScreenUpdating = False
Dim a, i As Long, rCell As Range, ws As Worksheet[code]....
View 9 Replies
View Related
Sep 7, 2006
I have to convert a range reference in the form of
Range(Cells(1,1),Cells(2,2))
to a reference in the form of
"A1:B2"
View 5 Replies
View Related
Jun 11, 2014
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
View 2 Replies
View Related
Jul 7, 2014
I have a list of numbers which I need to compare to a range of numbers. Each number in the list needs to be compared to the range, and depending where it falls within the range, a particular cell needs to be referenced in the result. I've attached the xls with the explanation.
I was going to do this with a nested IF, but with a max of 7 this will not work.
Attached File : Help with comparing to a range.xlsx
View 5 Replies
View Related
Jul 21, 2014
I would like to count all of the cells in a filtered range which contain specific text. These cells will also contain numbers.
The cells either contain one of the following
EXA 130
130
EXB 130
The number could be any number (not just 130) the text will only be EXA or EXB
So I am looking for the number of cells in a filtered range (visible cells) which contain EXA (plus any number)
SUMPRODUCT(SUBTOTAL(102,OFFSET(X8:X3000,ROW(X8:X3000)-MIN(ROW(X8:X3000)),,1--(X8:X3000,"*EXA*")
The above doesn't work and I have attempted lots of variations of this with no luck.
View 5 Replies
View Related
Jul 22, 2009
I am trying to find the right format that will show a variety of account numbers properly.
I have these types of numbers displaying like this right now:
9.04585E+13 (should be 90458524211818)
785656.001 (showing properly)
NRDE1312089 (showing properly)
SCGA 396.00 (showing properly)
The formatting is set to general, which works for all but the top type of account number. I tried setting to a custom format like "#.#######" ...The only problem with that format is that the "." shows up whether there is a decimal in the number or not. What's the way around that?
View 9 Replies
View Related
Jun 11, 2008
I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
View 9 Replies
View Related
Feb 15, 2010
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
View 14 Replies
View Related
Jul 14, 2014
Is it possible to reference a cells value to define a range reference?
[Code] ......
I am trying to define the row value in the range reference with a value in a secondary cell?
View 3 Replies
View Related
Jan 9, 2010
I need to add a Reference to the "The Microsoft Visual Basic Extensibility Library 5.3" using VBA code in an Excel spreadsheet. I know how to do it going to Tools...References select the library etc, but I'd rather do it using VBA code so I don't have to do this extra step.
View 3 Replies
View Related
Feb 26, 2010
How can I change the following line of code to reference Cell "D1" on the "Publish Details" sheet to replace the "D2:D"? ..
View 9 Replies
View Related
Nov 23, 2006
my excel sheet runs through different cases (i=1 till i=20). For each case I need to use the solver. Since the whole programm works with references like this cells(10 + i, columnindex).value I tried this with the solver, too. e.g.: SolverOk SetCell:=Cells(20 + i, 46), ValueOf:="0.000001", ByChange:=Cells(20 + i, 47)
But it gives me not a right result as it would give me with a reference like
SolverOk SetCell:="$AT$21", ValueOf:="0.000001", ByChange:="$AU$21"
I tried difference referencing things with different types of brackets, wih range, etc. but I could not figure it out hwo it might works.
View 4 Replies
View Related
Jul 15, 2014
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
'Worksheets.Open Filename:=DataRawSheet
'ActiveSheet.Range("A1").Select
Reference_Cell_to_Sheet.xlsm
View 4 Replies
View Related
Jul 29, 2009
I have a macro which (see below) which will autofilter a spreadsheet to only show cases which are older than a 200 days. I'd like to add the ability for the end user to change the filter criteria as required (say from 200 to 300).
Ideally this would be done by having the macro reference cell G22 which is where I would allow the end user to change the filter criteria.
View 8 Replies
View Related
Dec 22, 2011
I am looking to start writing a code that will a row # from a dynamic cell within the workbook and use that row # to select the row and delete it.
Example:
In Cell G5=8
I would like the VBA code to see 8 as row 8 and delete row 8.
Row 8 is determined by looking up a name and finding which row it is in and returning the row number.
View 1 Replies
View Related
Mar 3, 2013
Code:
Sub ProtectAll()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
.Protect Password:="Password", AllowFiltering:=True
.EnableSelection = xlUnlockedCells
End With
End Sub
I am trying to get autofilter to be active when i run my protect macro.
View 3 Replies
View Related
Sep 4, 2009
I'm at my wits end trying to work out why I'm getting a circular reference when this code runs:
Private Sub TextBox1_Change()
Cells(Rows.Count, "K").End(xlUp).Offset(1).Value = Range(TextBox1.LinkedCell).Value
With Range("K5").Resize(40, 1)
.FormulaR1C1 = "=OFFSET(" & Cells(Rows.Count, "K").End(xlUp).Address(True, True, xlR1C1) & ",-(ROW(RC)-ROW(R5C)+1),0,1,1)"
.Value = .Value
End With
End Sub
The circular reference cell is K29. I have an "X" in K46 after which all the values in TextBox1 are copied.
View 9 Replies
View Related
Aug 14, 2007
Is it possible to make a textbox or combobox the reference of a formula in a cell?
I know that you can just do this on VBA, but if possible I don't want to do that in this particular case.
View 6 Replies
View Related
Feb 25, 2008
I'm looking for a macro that changes Iterations from 100 to 10. I have a circular reference that I can't seem to completely remove, so my endusers complain about the pop-up warning. I know I need to resolve the circular ref issue, but in the meantime I would like to create a button that makes it easy for an enduser to change the Iterations with one click. A secondary question is, "Am I sacrificing significant accuracy by limiting Iterations from 100 to 10? I'm dealing with $'s, so the nearest penny is good enough.
View 2 Replies
View Related
Aug 12, 2014
Where it is bolded I am trying to replace that with a cell reference such as A1 where I can input a website in that cell rather than edit the VBA code everytime
Here is the code:
Sub URL_Get_Query()
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://quote.money.cnn.com/quote/quote?symbols=msft", _
[Code]....
View 1 Replies
View Related
Mar 2, 2007
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button
Private Sub EPConversionButton1_Click(ByVal target As Range)
Convert_Hrs_EP target
End Sub
And here is the subroutine.
Sub Convert_Hrs_EP(target As Range)
End Sub
There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
View 9 Replies
View Related
Aug 22, 2008
I need to copy a range of values from sheet 3 to sheet1. When I recorded macro, I got the below code. But, instead of RC in the 4th line <ActiveCell.FormulaR1C1 = "=Sheet2!RC"> I need to pass values like A1,A20 etc.
Since the values range & column to be copied would be varying dynamically, (say for first iteration it would be A1: A20 & for second iteration, I need to copy C1: C20.) how to pass these variables to the macro and use it instead of the static "RC". Whatever column I specify, it should copy from that <column>StartRow to that <column> EndRow.
Sub Updtval(StartRow As Integer, EndRow As Integer, f As Integer)
Sheets("Sheet1").Select
Range("A1").Select
ActiveCell.FormulaR1C1 = "=Sheet2!RC"
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A6"), Type:=xlFillDefault
End Sub
View 3 Replies
View Related
Apr 11, 2008
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
View 4 Replies
View Related
Jun 29, 2008
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies
View Related
Aug 8, 2008
How do I change the code so that the macro looks up the next sheet (instead of by sheet number, which is how the code was recorded) and transfers data to the summary page until there are no more new sheets. See attached zip.
View 6 Replies
View Related
Oct 22, 2013
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
View 2 Replies
View Related
Jun 19, 2014
I'm trying to make a vba that would save the file with the end date that will reference to a certain cell that user selects it. Working Sheet is a name of a File, and Current Sheet is a name of the panel where user will select the date.
ActiveWorkbook.SaveAs Filename:= WorkingSheet("Control Sheet").Range("D3").Value & Format(Date, "yyyymm") & ".xlsm", FileFormat:=51
But here i seem to missing the location
And I tried this one:
ActiveWorkbook.SaveAs Filename:="X:Work2014WorkingSheet& Format(Date,"yyyymm"). & ".xlsm" _, FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
but it keeps popping up as 'expected end of statement' for yyymm?
View 8 Replies
View Related
Mar 11, 2008
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
View 3 Replies
View Related
Jun 5, 2008
Following syntax is incorrect, what is wrong? This should happen: Select op a specific worksheet (named DATA) in the workbook Report.xls and I empty the contents
Then I try with a 'With' statement to read the contents of a file named "sourcedata.xls' with helds a worksheet named "source". The values in this sheet should be tranfered to the sheet DATA in the workbook "Report.xls"
Sub FetchDataFromClosedWorkbook()
Dim FileName As String
Dim SheetName As String
Dim cellRange As String
Const ReportPath = "C:ExcelReports"
Windows("Report.xls").Activate
Sheets("DATA").Select
Cells.Select....................
View 3 Replies
View Related