Address Single Cells In Named Range
Dec 22, 2006
I'm having a 'mental block' day. I have a Named Ranges in a spreadsheet (Office XP). The range is defined as =OFFSET( ' Stock List'!$K$1,0,0, COUNTA('Stock List'!$F:$F),4)
i.e. starts at K1, is 4 cols wide and as deep as there are occupied cells in col F. (as I understand it). I want to treat this as an array in VBA and use 'x' and 'y' as indexes into the array. I want to either get the value from a single cell, or set the value in a single cell, which contain a string. I know its not correct but I have the formulae as follows, and for the life of me I cant figure out what the correct formula is -duhh!!
Dim x As Integer, y As Integer, z As String
x=3 'dummy test code
y=2
Range("MakerExtractArea").Offset(x, y).Value = "dummy"
z= Range("MakerExtractArea").Offset(1, 0).Value
View 7 Replies
ADVERTISEMENT
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Feb 20, 2008
how to get the value of a cell by its name. For example, i give cell B2 Name "Hello" and value "2". how to use vba to get the value of 2 using its name 'Hello', but not the cell 'B2'. Somethings people delete and add rows or columns and using range may lost the right value.
View 2 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
May 18, 2007
I have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0
Next I
View 9 Replies
View Related
Mar 20, 2009
I have a workbook with a named range myrange, cells a2:a1001. I have counter as a named range, mycount cell z2. I want to get the value of myrange at cell address mycount and put that value elsewhere using vba.
View 2 Replies
View Related
Nov 6, 2008
I have a large amounts of named ranges each of about 100 rows 20 column's each in its own sheet and I need to be able to refer to a singe cell in that range.
I want to do this so that I can use an offset to get another cell value relative to the cell in the named range.
F9 contains a hyperlink to the named range and is the same as the named range but with spaces.
A couple of things that I have tried are below:
=OFFSET(INDIRECT(SUBSTITUTE($F9," ","_")),1,0)
=OFFSET(VLOOKUP("bob",INDIRECT(SUBSTITUTE($F9," ","_")),14,FALSE),1,0)
Neither of these work, I am asuming it is because I dont have a specific cell reference named for the offset?
View 9 Replies
View Related
Mar 7, 2013
My problem has to do with an list of over 22,000 addresses (don't want to think about going through it manually )
The names are in column A and the addresses are in column B. The problem is, is that some of the addresses fit in one cell and others are spread over two (Oklahoma City, OK in one cell, 73034 in the one below it, for example.)
The names with corresponding addresses taking up two squares have been placed in merged cells, so that they line up with their addresses. Here is a picture below.
Capture.PNG
What I need is each address in one cell next to its address in one cell (to make it searchable, etc.) I thought I was being really clever when I copied Column A, then pasted the formatting onto Column B (so that the cells would be 1:1, one name cell, one address cell) but didn't realize I would be losing the information in the cells being merged.
View 5 Replies
View Related
Nov 30, 2008
The problem exists with the lists I use. I have a "settings" sheet, where users can choose from preset values to run in the program. E.g. "Urgent", "Semi Urgent" and "Non Urgent" (there are a lot more values, but those will do for now." and the idea is to run them 1 at a time.
However, I've now determined that 99% of the time, they're going to be run 1 after another, that is to say run the program once for "Urgent", then again for "Semi Urgent" and then again for "Non Urgent". So I'd like to loop through these. Again, not a problem, you'd think.
So I added a new value to the list; "All" which users can select to invoke a list. Again, not a problem, I already have the list as a named range, "DmgList" and I can cycle through it. I ran the following test code to see if it would work in theory...
View 4 Replies
View Related
Jun 18, 2007
About 2 weeks ago Reafidy posted a reply to the following thread. Save Individual Sheet Based On A1. As I do not want to hi-jack anyone elses thread so I am starting a new one. The code posted does basicly what I need however I was wondering if it is possible to save only "ONE" specific sheet which could be specified in the code, to a specific folder specified in the code and under a name defined by a cells contents. eg.
Save a single sheet named "MatData" from a workbook, name the saved sheet from a "named range on sheet1" & "Cutlist" & ".xls"
to a Folder on the "D" drive called "Saves"
View 3 Replies
View Related
Apr 24, 2013
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
View 9 Replies
View Related
Apr 11, 2008
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
View 5 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Sep 7, 2006
I have to convert a range reference in the form of
Range(Cells(1,1),Cells(2,2))
to a reference in the form of
"A1:B2"
View 5 Replies
View Related
Oct 16, 2006
Sub TestSearch()
Dim FoundCell As Range
Dim SearchString As Variant
'Specify Value to Search
SearchString = " Excel"
'Perform the Search and Return a Cell Value
Set FoundCell = Worksheets("Source").Range("A1:A10000").Find(" Excel", lookat:=xlPart)
If Not FoundCell Is Nothing Then
MsgBox "Found at " & FoundCell.Address
End If
End Sub
I'd like to take the code above, which returns a cell address which contains the text " Excel" and modify or add to it the capability to copy a range starting from the address returned and ending 102 cells further down in Column A on the Source sheet to A1 of the Sheet1 sheet. The crux of the problem seems to be converting the address to a row number then adding the value of the number of cells in the range to find the end row number then converting that back to an address??
View 5 Replies
View Related
Dec 9, 2007
I would like to know how many entries/ cells a particular named worksheet range has.
(This named range is not a global name range, but a local one only for one worksheet!)
However, my code results in 0 always, althought the worksheet in question is defined (not nothing),
I see that the name range is defined properly (Edit -> Define) and refers to serval non-empty cells.
I would like to know how many cells in general a particular named worksheet range refers to. What do I do wrong?
Const strRngNmeCllShRawIntBlPre = "preBlRng" 'name of the named range
If Not wksTarget Is Nothing Then
intPreBl = Application.WorksheetFunction.Count(wksTarget.name & "!" & strRngNmeCllShRawIntBlPre)
MsgBox intPreBl
End If
View 6 Replies
View Related
Feb 6, 2008
I’m having some difficulty getting my code to work. On a worksheet there are pairs of columns containing data; the leftmost column’s range is named. I have a userform with several optionbuttons that are named with the corresponding range names. I can successfully populate the userform's combox with unique items from a named range that is selected with the optionbutton.
When user selects item with combobox, I want to parse that named range with the combobox value, selects the value in the corresponding row (to the right) and then populate the userform's listbox with that value. The nonworking code is given below:
Private Sub cbxFiltList_Change()
Dim fCntrl As Control
Dim TempRange As Range
Dim TestRange As Range
Dim cLoop As Range
Content_lbx.Clear
For Each fCntrl In UserForm1.Frame1.Controls
If TypeName(fCntrl) = "OptionButton" Then
'If the optionbutton = True then the make the range to be tested the same name as that of the optionbutton'..............
View 2 Replies
View Related
Oct 2, 2008
I want to run a macro when a cell is changed and populate Cell A12 With
the value in a named range.
The Name of that range is in cell A3
so i assumed i could do the following:
View 7 Replies
View Related
Nov 30, 2008
here is the snippet of code I'm using
View 11 Replies
View Related
Sep 25, 2011
I have a sheet containing 2 lists of categories for income and expenses. These lists are named inc and exp, respectively, and are contained in a sheet called "Lists." They are dynamic ranges, meaning every time a value is added, the named range adjusts itself to include the new value(s). [=OFFSET(Lists!$A$1,0,0,COUNTA(Lists!$A:$A),1)]
I have 2 tables summarizing 12 months of data. The tables use sumif to find all occurrences of each category and sum them. There's 1 table for income, 1 for expenses. Each is a 2 column table, with all the categories for income in column A and their total for 12 months in column B. Same for Expenses in D & E.
To populate the categories in column A & D, I am currently using the simple =Lists!A1 =Lists!A2 (inc range), =Lists!B1 =Lists!B2 (exp range) and so on... the problem is when a value is added to either list, while the named range adjusts, I have to manually drag the formulas in Column A & B down 1 more cell to include the new value.
How can I use VBA to look for the inc and exp ranges (which will change in size), then populate each table with the most recent categories?
View 9 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Jun 21, 2014
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
View 2 Replies
View Related
Jun 2, 2014
I've managed to write a macro to take data input into a column-oriented form and transpose it into the next available rows in 3 data sheets. In the blank workbook, you will find a functional data entry form with a "submit" button that transposes data from the first column of the form to the next available row in sheet "Data_R", data from the second column of the of the form to the next available row in sheet "Data_I", and the sum of both columns to the next available row in sheet "Data_C", clearing the form for further use.
Now, I need adding to the macro code that will sum data from the constituent columns of each multi-column category header (Marketing, Intake, etc.) in sheet "Data C", entering the sums under their respective single column headings in the next available row of sheet "Data_S".
I need to do this in order to use Defined Names (utilizing the OFFSET function) to create charts comparing the different categories that automatically update as new data is input via the form. I know how to do this, I just need the multi-column categories summed into single columns to make it work.
View 9 Replies
View Related
Dec 17, 2012
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
View 4 Replies
View Related
Jul 21, 2006
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
View 9 Replies
View Related
Jan 11, 2007
I recieve a spreadsheet each month with the following column of data:
9 Paddington House
PO Box 73
Whiteleys of Bayswater
9-10 Grove Road
134/138 Drymen Road
44-46 The High Street
1 Midland Road
48 Donegall Place
As you can see, it consists of addresses, each line is a separate address. I need it to be converted so that the data is split into the following 5 fields:
Street number from
street number letter from
street number to
street number letter to
street
If there is no street number , then it should just enter the data into the street field. If there is a range such as 44-46, it should enter the 2 numbers into the from and to fields. Sometimes this is in the format 44/46. Also, sometimes there are letters, eg 44a-44b, in which case each section (ie 44, a, 44, b) needs to be in a spearate field.
View 9 Replies
View Related
Dec 3, 2013
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies
View Related
Mar 28, 2014
I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.
I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.
I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.
View 3 Replies
View Related
