I've made one calculator.
Offertkalkulator Freihandlabor GmbH.xlsx
I want to convert excel file with all functions in PDF.
So I want all functions and formulas that are in excel to work in PDF.
I have a really long function which counts the number of unique values in a selected range, and ignores blank cells. The function is like this (only works as an array function):
{=SUM(IF(FREQUENCY(IF(LEN(A1:A15)>0,MATCH(A1:A15,A1:A15,0),""),IF(LEN(A1:A15)>0,MATCH(A1:A15,A1:A15,0),""))>0,1))}
I want to convert this into a user-defined function COUNTUNIQUE, which only takes one argument: the range (A1:A15 in the above example)
To avoid manually updating a formula 100+ times, I am looking for a way to update cells in a column with reoccuring formulas with references to other cells that vary respectively from cell to cell. Meanwhile, there are other cells without formulas that this will not apply to in the same column. I am trying to avoid macros if possible, unless it can be easily understood/modified by someone who knows next to nothing about macros or VBA. My initial thought was to use the find/replace feature, but I don't know of any way to do this so the reference will update respectively for each cell (ie A9 then A10 etc.) in both the find and the replace fields.
ie
Find: A9="Text1"
Replace: OR(A9="Text1",A9="Text2")
Where the row number updates respectively.
Simplified example:
Existing:
=IF(A9="Text1","1","2")
[misc. blank or non-blank cell]
=IF(A10="Text1","1","2")
etc..................................
Is it possible to disable all Excel functions? not as in disable calculation, but actually make Excel's standard functions not available in a workbook.
My reason for wondering if this is possible is that I would like to write UDFs that perform special actions in addition to the typical Excel functions, but give them the same name as their Excel counterparts... essentially create polymorphisms / overloaded Excel functions.
Attached is a small spreadsheet, my problem is I am using Excel 2007 and it only allows me 7 nested functions and I need to do 31.
Nested Function.xlsx
How to add Sumproduct and Min/Max functions? Using Excel 2010
I am looking for the minimum, or maximum number within a range while using the Sumproduct function.
=SUMPRODUCT(--ISNUMBER(FIND("R",CMSB3003.xls!$A$12:$A$20000)),--ISNUMBER(FIND("Reg",CMSB3003.xls!$AF$12:$AF$20000)),
--(CMSB3003.xls!$B$12:$B$20000>=$B$2),--(CMSB3003.xls!$B$12:$B$20000
Is is possible to Update the master sheet with data from sub sheets in one click? Let us say we have one Master Sheet and Three sub sheets with name A, B, C. I would like to have excel function on Master sheet or Update button on Master sheet by which if i click on that it should copy all data except labels from A, B, C to Master sheets and also while copying one column should get auto filled based on from which sheet the data been copied. For example- If 10 data copied from A sheet on column X should show A, if data is copied from B, it should show as B...
View 1 Replies View RelatedAll of the functions' X Axis were given the same data (12,24,36,48), except ROULETTE and TOURNAMENT which were also given (60) for the X axis.
Why do the NORMAL bars aren't located on the place they should on the X axis?
For example, the 1st bar (from the left), should be a little more to the right. The others should move to the left.
Is there any formula that I can use when working with a specific date range and if someone's birthday falls in that range a certain text or value would be displayed? For example I want to create a spreadsheet for my soccer players and have them sorted into teams according to their birthdays. So if their birthday falls into the following date range: 08/01/05-07/01/07 a U-8 or U-10 would be displayed in the corresponding cell. I tried working with the IF function.
View 4 Replies View RelatedIs there any excel-addin which offers function in which you could search any excel function (not just formula) so that you could access any function in a seconds, just like google desktop search for windows.
Right now you could use quick access for most common functions you use and shortcuts for functions in different group. But if there is universal search for all the functions, it is going to be faster for any access!
I have the following data. i need to count 5 times "N-TRX1" IN column "D". and returns me input "true/false". but the catch is that i need then to overlook this 5 times and start to count again from the same column without deleting the old data. Can i do it?
A
B
C
D
E
date
STATION
NO
NO+STATION
11/05/2014
N-TRX
1
1N-TRX
[Code] .........
I am trying to extract values from a text. I used macro to solve the problem. I was able to extract the numbers however i am trying not to extract all of the numbers in text. For example as you can see below, i am trying to get only 22.99 The only unique thing here can be $ sign i believe. I need to put a criteria that selects the number right after $ sign and extracts 5-6 decimals after that.
**work lamp/desk light led;orion8879 final price: $22.99 (store)**
this is the text in a cell and i only need 22.99 not 8879)
I need to calculate a Stdev and Average based on a specific range. However, my range is not constant in the time. For instance, today I may need to calculate these functions based on 30 numbers, but tomorrow on 25 or 15 or 50...
Is there a way to automate this process by changing the number of data points to include in the range in one single cell and avoid manually adjusting the range in accordance with needed data points?
In other words, I would like to change the value, let's say in Cell A1 from 30 to 50 and then Excel would re-calculate the StDev and Average based on 50 data points and not 30. Is that possible?
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
Is there a formula similar to WORKDAY that would include weekends and make something due on the next business day? For example, I have a bill due on 6/1/11 and I need to follow up 5 days later - which would be normally 6/6/11 but the WORKDAY formula makes it 6/8/11 as it is adding 2 extra days.
I am using Excel 2010.
Is there any macro that can be used to convert data which have been converted from PDF to Excel. Currently I'm using a traditional way by pressing F2 and enter to convert the data to excel format. It's tedious ( since the data range is quite big) and crammed my finger.
View 9 Replies View RelatedI'm trying to simplify a spreadsheet i've been given by defining names for certain values. I'm using Excel 2013. Is there any way to have all of the newly defined names I've created for cells automatically be inserted into all of the formulas that exist in the spreadsheet?
Example.
Old formula in one sheet of a workbook looks up a cell in another sheet with the value of ='sheet1!A1
I've given the value of cell A1 in Sheet1 a name of dgwd.
How do I get every formula in the workbook that references 'sheet1!A1 to change the value within that formula to dgwd?
I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
I am using Excel 2011 for Mac
I want to convert code below to excell formula
VB:
Sub Fonksyon171819()
Dim total As Double, i As Integer
total = 0
[Code]....
I have big Access file .mdb. I need to work with the file in Excel.
The Excel read the file and I tryed to save the file as .xlsx
I receive a message saying only 64k rows will be saved.
How can I translate the file to Excel 2007?
How do i consistently convert a PDF table to Excel? When in the PDF i am recognizing the text and then trying all available ways to either copy or export the selection (to all available file types!) but it only works in a usable manner about 10% of the time....
View 5 Replies View RelatedI Use the Quickbook 2009 for accounting. I need to convert CSV files over to QBO files. Any Software are not to Convert CSV files to QBO files.
It's Possible to Convert the CSV files to QBO Files via Excel.
I need a macro, to convert pdf to excel. This pdf file has columnar data, if it could be converted into in the same format.
View 1 Replies View RelatedIs there a free program available to convert PDF files to an excel file.
View 1 Replies View RelatedHere is the excel formula that works fine. =INT(EXP(.0003*POWER(x,2)))
View 1 Replies View RelatedI have just upgraded Excel from 2003 to 2010 and cannot locate where I would convert a spreadsheet to a .pdf document.
View 2 Replies View RelatedIs their a way to convert a PDF file into an Excel spreadsheet?
View 5 Replies View RelatedConverting excel files into fully functional standalone and interactive web applications/dashboards? I have only worked with spreadhseetconverter before it converts excel files into interactive calculators but lacks the features which are available in the standard dashboards like gauges and widgets and the rest because it only converts the standard excel charts. I wonder if you have encountered a product which can converts excel files into fully functional interactive dashboards?
View 1 Replies View RelatedI want to convert Hex to Binary. I want the Binary in 8 different cells.The hex input would be lets say A1 I would want to convert that to eight different cells Bit7 G10, Bit6 G12, Bit5 G14, Bit4 G16, Bit3 E10, Bit2 E12, Bit1 E14 and Bit0 E16.
Then I want another Hex input on A2 and convert that to eight diferent cells.
Bit7 K10, Bit6 K12, Bit5 K14, Bit4 K16, Bit3 I10, Bit2 I12, Bit1 I14 and Bit0 I16.
How would I do This?
to convert a complex Excel file to a Web App (usable in the browser of a iPad) which has 15 sheets and some input.I tried every javascript/jquery library, tried to hire a freelance, asked for a quote everywhere, tried add-ins, etc. Nothing seems to work. Manually, well, it is pretty impossible within 2 days.
View 3 Replies View Related