Convert Sumproduct Formula For Use In Powerpivot?
Aug 25, 2014
I'm looking for a formula for use in powerpivot, that can convert the following formula (I do not wanna use any VBA, only generate a caluculated column in powerpivot, based on a formula)
[Code] .....
The formula checks for 3 different values, and returns a status code for each. If no match is found it returns "no match".
The formula looks for the criteria (1234 or 1857201 or 1857206) in column2 (item) and writes a status code in column3 (output). At the same time it also checks for simular order numbers (column1). So the same status code is present for all order-number rows. (If a match in column2 / item is found)
See the excample in regular excel here: [URL] ....
View 1 Replies
ADVERTISEMENT
Oct 31, 2006
The attached has a sumproduct formula that is slow down the calculation of my workbook. (I know there is also an array formula-that's another thread). I'd like to use a macro to fire on the worksheet change so I don't have the heavy recalc burden. The formula is in worksheet "Database" in column H. So far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
If Not Intersect(Target, Range(Range("rReason").Offset(1, 0), Range("rReason"). _
Offset(UsedRange.Rows.Count + 1, 0))) Is Nothing Then
Target.Offset(0, 1) = Application.VLookup(Target, ValList.Range("ReasonLkUp"), 2, False)
'This formula below needs a VBA equivalent
' Target.Offset(0, 2).FormulaR1C1 = "=IF(RC[-1]>0,SUMPRODUCT(-(R7C7:R35000C7<0)*0.5,--(R7C3:R35000C3=RC[-5]))+SUMPRODUCT(--(R7C7:RC7>0),--(R7C3:RC3=RC[-5]),R7C7:RC7),0)"
End If
If Not Intersect(Target, Range(Range("rSurname").Offset(1, 0), Range("rSurname"). _
Offset(UsedRange.Rows.Count + 1, 0))) Is Nothing Then
Target.Offset(0, 1) = ActiveCell.Offset(0, -2) & " " & ActiveCell.Offset(0, -1)
End If
End Sub
View 5 Replies
View Related
May 1, 2012
I have a large metrics spreadsheet that has thousands of formulas using SUMPRODUCT. We are using Excel 2007/2010 now and I wondered if there was a way to convert these type of formulas to use the SUMIFS or COUNTIFS. I can do simple ones with 1 or 2 criteria where its AND, but then there is a combined OR and AND like this one has I cannot get them to work right, am I stuck with using SUMPRODUCT? My hope was to speed up the overall calculation speed. Note: The data spreadsheet 'Sheet2' contains 64555 rows, I write these formulas using VBA so that the range is finite to the actual data range is why you see 64555.
=SUMPRODUCT(--('Sheet2'!$J$3:$J$64555=$A6),--(('Sheet2'!$I$3:$I$64555="HOC")+('Sheet2'!$I$3:$I$64555="MGN")))
View 2 Replies
View Related
Dec 8, 2010
I need to convert the following formula to a Sumproduct so the link will not be broken when I close the linked workbook:
=SUMIF('Z:WUTDaily Report[2010 Monthly Rpt - CPM - Thru November only.xls]2010 Expense'!$E$231:$E$332,"M&R Parts D",'Z:WUTDaily Report[2010 Monthly Rpt - CPM - Thru November only.xls]2010 Expense'!AE231:AE332)
View 4 Replies
View Related
Jul 17, 2007
What would be the correct syntax to convert this sumproduct formula to a dsum formula
I can't seem to find any examples that match my exact need
=SUMPRODUCT((Data!$A$2:$A$15998=$B$3)*(Data!$C$2:$C$15998=$A14)*(Data!$E$2:$E$15998=B$10)*(Data!$D$2:$D$15998))
View 7 Replies
View Related
Feb 25, 2014
convert this equation into sumproduct function..??
=COUNTIFS($I3,">="&$AC$3,$I3,"<="&$AC$4)
View 6 Replies
View Related
Nov 14, 2013
I have a column in powerpivot that has Products total amounts. Some of them are negative amounts but I want them to be positive. How would I write an IF statement for it? I want it to say " If Division amount column is a negative, then multiply by -1 but it is a positive , leave it as a positive" .
View 2 Replies
View Related
Nov 27, 2012
I am trying to create one giant pivot table from 3 different tables. I have been playing around with power pivot but can't create any relationships since my data is duplicated or something. I have three tables, each of which have a few columns that are the same- date, account, description and amount. The three tables are comprised of 3 bank statements from Mar-Oct. What I want to do is basically pivot the three tables so that I can list account by date for all of the entries in the 3 tables, however each of my tables may have duplicate dates such as:
Table 1
DateDate DetailCB AccountTranslationTransaction
2012.042012.04.02IN TRANSITFunds to be released(211.41)
2012.042012.04.02NETAutomatic investment(7,164.27)
2012.042012.04.0212030Client Payment211.41
2012.042012.04.0212030credit card receivable (Cielo)1,684.00
2012.042012.04.0212030credit card receivable (Cielo)1,862.26
2012.042012.04.02N/Aavailable balance0.00
Table 2
DateDate DetailCB AccountTranslation Transaction
2012.042012.04.02NOT DETERMINEDTO BE CONFIRMED WITH LUCIANA - INVESTMENT IN (649.63)
2012.042012.04.0312030RECEIVED FROM SUPPLIER 78.84
2012.042012.04.03NETTRANSFER CHECKING TO CORPORATE CHECKING (100.00)
2012.042012.04.03NETTRANSFER FROM INVESTMENTS 250.00
2012.042012.04.0412030RECEIVED FROM SUPPLIER 17.68
2012.042012.04.0512030RECEIVED FROM SUPPLIER 337.90
Is there a way for me to connect these two tables so that I can pivot by 2012.04 and show the sums of transactions by CB Account?
View 1 Replies
View Related
Sep 7, 2013
I'm trying to figure out whether or not something is possible in power pivot. I'd like to load two tables into powerpivot and then set up formulas that create calculated values across the two tables.
Here's a simplified description of what the tables look like. [URL] .........
The pivot table should join the two tables on Month and Category and allow me to create calculated values across the cost category, like this. Note it's filtered to a single cost category right now: [URL] .......
In this view it's filtered to all cost categories but i'd be looking to still maintains the right count of members (i.e. it doesn't inflate the numbers from duplicate records as you might get if you were to join the two tables in a sql database): [URL] ....
The actual tables I would use are quite a bit larger (too large for excel without pp), and have quite a few more of each type of category.
Would something like this be possible to do in powerpivot without having to do some data prep work in another app to join the two tables together?
View 1 Replies
View Related
Mar 22, 2014
I threw together some sample data, just to test things out. It's very basic, one table of "Customers" and another table with the 50 US State's and their corresponding abbreviations. In the "Customers" table, there is a column of state abbreviations, and in the "States" table there is a column of state abbreviations as well. I have a relationship set up between these two in PowerPivot.
Each "Customer" in the "Customers" table has a unique "User ID". In some states, there are multiple "Customers" (User ID's).
When I try to pull a PowerPivot Table off of these tables, it's showing me all the states as being associated with every user ID. It looks correct if I just pull in the "States" column and the "User ID" column from the "Customers" table...
image1.jpg
But as soon as I drag in the "Full State Name" column from the "States" table, it screws up the PowerPivot Table and shows all the state names being related to the state abbreviations, and all the User ID's as being related to all the states. (This isn't the full image of the table, only part of it, since the full image would be too large).
image2.jpg
I'm used to doing everything with VLOOKUP's, and seldom used PivotTables at all in the past. But it was my understanding that these new PowerPivots would eliminate much of the need for VLOOKUP's.
View 2 Replies
View Related
Aug 2, 2014
I have created a calculated column in PowerPivot and inserted a formula that worked in a normal excel spreadsheet however, this formula does not work in PP anymore.
=find("green",Table1[Name],1)
Name column:
NAME: Bag green
it should find "green" in the name and return the position. Hoever it alway returns the error, that the find function could not find the string.I have attached an example spreadsheet.
View 1 Replies
View Related
Jan 23, 2014
I have a database with a list of transactions with multiple fields, including:
Customer ID
Store ID
Item ID
Date
Price
I am wanting to add a calculated field that displays the first (or MIN) Date from the date column, looking at all of the orders where the customer ID, store ID, item ID and price are the same.
In the attached file I have shown what I currently have, as well as a solution using a helper column, and formulas I would use if I wasn't using powerpivot.
View 2 Replies
View Related
Dec 9, 2009
I'm trying to write a SUMPRODUCT formula (cell H2 in the attachment) that gives different outputs according to the value of another cell (H1), but the output values are incorrect. I suppose it's because the "else" value given in the IF formula won't be recognized as a formula but as a text.
View 5 Replies
View Related
Jul 11, 2007
I'm currently using a series of SUMPRODUCT formulas to populate a summary page from a large data source. This works fine in the most part, however one part of the summary page calls for a number of different criteria to be counted within the same data range. I'm currently using a work around by having three seperate SUMPRODUCT formulas on hidden rows, and then totaling their answers to give me the result I want, however I wondered if there was a cleaner and better way to do this? An exampel of the formula I am currently working with is below:
=SUMPRODUCT(('Filtered Data'!$A$2:$A$10000="Stock-Out")*('Filtered Data'!$I$2:$I$10000="Open")*('Filtered Data'!$Q$2:$Q$10000="A"))
The final part of the formula is what is causing me the problem - I would like it to look for and count occurances of "A" , "B" , & "C"
View 9 Replies
View Related
Jan 29, 2009
I've got a workbook where sheet "Raw Data" is used to enter audit findings. Subsequent sheet "Analysis" contains formulas to extract quantities and nature of audit findings so that they can be shown on quarterly reports.
When I set up the workbook the formulas on the "Analysis" sheet worked fine. The department has filled the columns with data and now all the formulas are returning #Value! There's something fishy going on here.....
=SUMPRODUCT(--('Raw Data'!$H$7:$H$1000=A4),--('Raw Data'!$K$7:$K$1000=C$1))
View 4 Replies
View Related
Feb 24, 2009
No doubt due to a fundamental lack of understanding my SUMPRODUCT formulae (please see attached workbook) is not working.
Can someone be kind enough to point out the error of my ways? I've tried every possible combination (except the right one).
View 7 Replies
View Related
May 6, 2009
I have a function that has a formula sumproduct and here it is:
Set RSheet = Worksheets("Rawdata")
Set RSheet = Worksheets("Rawdata")
RSheet_lastRow = RSheet.Cells(Rows.Count, "A").End(xlUp).Row
RSheet.Range("AJ2:AJ" & RSheet_lastRow).Formulaarray = "=SUMPRODUCT
((V2>=ProjectedStarts!$K$1:$K$45)*(V2<=ProjectedStarts!$L$1:$L$45),ProjectedStarts!$M$1:$M$45)"
The problem is that when the formula is sent to each cell V2 (bolded) does not change to V3, V4, V5.
View 3 Replies
View Related
Aug 24, 2009
a1=good
a2 = 100
b1 = bad
b2 = 50
c1 = good
c2 = 100
would like to sum a2+b2+c2 only if a1,b1,c1 = good.
View 6 Replies
View Related
Feb 8, 2010
I'm using Excel 2003. I have been using SUMPRODUCT to look at too compare columns and data that is contained in both. Column L11:L52 contains the numbers 1 to 4 and Column K11:K52 contains the word YES in some cells. I just want to look and see if text is contained in a row in column L is it contained in that row in column K. This is the formula I'm using but it seems over complicated and I'm sure there is a way of just looking if the cell contains information without worrying what it is.
=SUMPRODUCT(--(Data!$L$11:$L$52=1),--(Data!$K$11:$K$52="YES"))+SUMPRODUCT(--(Data!$L$11:$L$52=2),--(Data!$K$11:$K$52="YES"))+SUMPRODUCT(--(Data!$L$11:$L$52=3),--(Data!$K$11:$K$52="YES"))+SUMPRODUCT(--(Data!$L$11:$L$52=4),--(Data!$K$11:$K$52="YES"))
View 3 Replies
View Related
Jul 15, 2013
I am trying to sum the same data across several tabs but I am using information in the column and row headers to find it. For some reason this formula wont work and I can't figure out what I'm doing wrong.
=SUMPRODUCT(N(INDIRECT(""&Sheets&"!"&ADDRESS(MATCH($A$12,$A:$A,0),MATCH($G$3,3:3,0)),FALSE)))
I'm getting #REF! and when I step through it, it fails when it reaches the Indirect statement.
View 9 Replies
View Related
Apr 12, 2007
I have a workbook which contains multiple lines of data. In column H it contains a date. I want to count how many of these dates occur in January. I also want to be able to add other criteria as well. Example, column H = Janaury and column D=Open. In cell B2 I have the number 1 which represents “January”. Below is my formula but it returns an error.
=SUMPRODUCT((MONTH('Raw Data'!H:H)=B2))
View 9 Replies
View Related
Jun 20, 2007
I would like to have a sumproduct formula to sum up in a paticular table in my worksheet. But its in a weird table format. Look in cell A1 that is my criteria it should sum cells G24 thru G28 and it should return the total of 1.8000. The rows could varies from time to time in those table formats. Does anyone knows how to accomplishment this.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG27=
ABCDEFG1114Y1.8000 2 114C 3 Material #DescriptionMan/Machine ScrapMaterial 4 Operation # Std/Rate lbs5 100510 6 101010 0.56207 8 9 10 114D 11 Material #DescriptionMan/Machine ScrapMaterial 12 Operation # Std/Rate lbs13 14 S-SO2 0.400015 100510 0.895016 101010 0.200017 18 19 20 114Y 21 Material #DescriptionMan/Machine ScrapMaterial 22 Operation # Std/Rate lbs23 24 100910 25 670114X 1.000026 670114C 0.400027 670114D 0.4000Sheet1
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 21 Replies
View Related
Nov 21, 2007
I'm trying to use the sumproduct formula to query 3 columns: I want it to look in column E for either a "P" "C" or an "A", multiply the corresponding numbers in column D and F, and put the sumproduct total in cell C5, D5 and E5 for each formula below. The problem is that I keep getting #VALUE! result. It's because some cells in the range have #N/A in them, but I can't control that.
Here is my formula:
=SUMPRODUCT(--(E9:E70="P"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="A"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="C"),D9:D70,F9:F70)
How can I use this formula if for example cells D15-17 have no values or are #N/A?
View 9 Replies
View Related
Oct 18, 2008
=SUMPRODUCT(--($C$1:$C$17="S"),--($C$2:$C$18"S"))
how does this formula work?
It counts the number of instances in a list but not sure how
does the ranges have to be differant for this to work? ie C1:C17 C2:C18
View 9 Replies
View Related
Oct 18, 2008
Is there anyone know how to Use sumproduct formula in macro?
View 9 Replies
View Related
Oct 22, 2008
I have a sheet with repeated dates for several months and I need to break out data by week and then by certain criteria. I can do 1 or the other but combining the COUNTIF formula and the SUMPRODUCT formula has proven to be beyond me.
I have this now:
=SUMPRODUCT(--(D2:D31719"7/19/2008"+0),--(G2:G31719>"5"))
but it returns a value of 0 which is incorrect.
What I need to do is have the formula return a sum of all of the fields in colG that are >5 within a date range. Once I find that # I have to divide it by another field and multiply by 100 to get the percent.
View 9 Replies
View Related
Jan 19, 2010
I have the following SUMPRODUCT FORMULA, Ive tested all the data in the columns. It's returning a #VALUE. Can someone explain?
=SUMPRODUCT((A1:A10="Ford")*(B1:B10="June")*(C1:C10))
I'm using Excel 2003, if that is a factor.
View 9 Replies
View Related
May 20, 2006
Some reason my sumproduct formula returns #Value!
=SUMPRODUCT((Data_2005!$A$2:$A$170=A$2)*(Data_2005!$F$2:$F$170=$A5)*(Data_2005!$S$2:$S$170))
wb is attached (stripped down for upload)
View 2 Replies
View Related
Dec 26, 2013
I have a sumproduct formula based on some criteria, but I don't know how add another criteria wherein I need to exclude in the count if the date in column F is 1/1/2009
Attached excel file for reference. LE26dec.xlsx
View 5 Replies
View Related
Jan 19, 2014
I am trying to sum up column V, when for a specific date in column z, and only sum when the two names EEM, Merri1* are involved. I used the * because there are a couple of variations for MErri1 after the 1. The formula is not working. I believe it's the way I'm combining this
[Code] .....
Full formula is below:
[Code] .....
View 14 Replies
View Related
