I'm using Excel 2003. I have been using SUMPRODUCT to look at too compare columns and data that is contained in both. Column L11:L52 contains the numbers 1 to 4 and Column K11:K52 contains the word YES in some cells. I just want to look and see if text is contained in a row in column L is it contained in that row in column K. This is the formula I'm using but it seems over complicated and I'm sure there is a way of just looking if the cell contains information without worrying what it is.

I have a series of rows and columns. Each intersection has a formula. I want to be able to manually enter text in the cells that contain formulas but then click a button next to the row if I want the formulas back. Here's what I have written so far. Is there an easier way to write these OR is there a more streamlined way of accomplishing what I'm after? There will be about 39 rows and 39 associated buttons.

(The screenupdating lines are there just because I don't want the screen to flash in any way when I click the button)

simplifying a formula which gathers data from about 50 worksheets from within the same work book.

The data to be gathered is in the same cell on each worksheet and is simply a number but i want the SUM of theses numbers carried forward to another worksheet. Each worksheet is named by date i.e. sheet 1 is named "16 June 2014" and sheet 2 is named "23 June 2014" and so on until "30 March 2015" (Each sheet represents one full week Monday - Sunday).

I have the following code which works but is slow. All the code is the same except the address part and the destination range. Any help simplifying would be great. Also, every time I run the sub it asks me if I want to replace the destination cells. Is there any code to circumvent that? Lastly, although the second and third query requests have a different destination range, excel shifts the previous query to the right, hence first command after final query request.

I have a macro which builds a report to be sent out daily, however some days there are no updates in certain categories.

The macro copies over certain template lines from a template report, then filters the formatted data sheet and copies the rows over to a report the problem is that certain days the filter returns no rows, so I put in a lengthy if statement

Here is the code I am currently using, I would like to simplify it (the entire macro would run this about 20 times over for different sections).

I'm trying to write a SUMPRODUCT formula (cell H2 in the attachment) that gives different outputs according to the value of another cell (H1), but the output values are incorrect. I suppose it's because the "else" value given in the IF formula won't be recognized as a formula but as a text.

I'm currently using a series of SUMPRODUCT formulas to populate a summary page from a large data source. This works fine in the most part, however one part of the summary page calls for a number of different criteria to be counted within the same data range. I'm currently using a work around by having three seperate SUMPRODUCT formulas on hidden rows, and then totaling their answers to give me the result I want, however I wondered if there was a cleaner and better way to do this? An exampel of the formula I am currently working with is below:

I've got a workbook where sheet "Raw Data" is used to enter audit findings. Subsequent sheet "Analysis" contains formulas to extract quantities and nature of audit findings so that they can be shown on quarterly reports.

When I set up the workbook the formulas on the "Analysis" sheet worked fine. The department has filled the columns with data and now all the formulas are returning #Value! There's something fishy going on here.....

I am trying to sum the same data across several tabs but I am using information in the column and row headers to find it. For some reason this formula wont work and I can't figure out what I'm doing wrong.

I have a workbook which contains multiple lines of data. In column H it contains a date. I want to count how many of these dates occur in January. I also want to be able to add other criteria as well. Example, column H = Janaury and column D=Open. In cell B2 I have the number 1 which represents “January”. Below is my formula but it returns an error.

I would like to have a sumproduct formula to sum up in a paticular table in my worksheet. But its in a weird table format. Look in cell A1 that is my criteria it should sum cells G24 thru G28 and it should return the total of 1.8000. The rows could varies from time to time in those table formats. Does anyone knows how to accomplishment this.

******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG27= ABCDEFG1114Y1.8000 2 114C 3 Material #DescriptionMan/Machine ScrapMaterial 4 Operation # Std/Rate lbs5 100510 6 101010 0.56207 8 9 10 114D 11 Material #DescriptionMan/Machine ScrapMaterial 12 Operation # Std/Rate lbs13 14 S-SO2 0.400015 100510 0.895016 101010 0.200017 18 19 20 114Y 21 Material #DescriptionMan/Machine ScrapMaterial 22 Operation # Std/Rate lbs23 24 100910 25 670114X 1.000026 670114C 0.400027 670114D 0.4000Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

I'm trying to use the sumproduct formula to query 3 columns: I want it to look in column E for either a "P" "C" or an "A", multiply the corresponding numbers in column D and F, and put the sumproduct total in cell C5, D5 and E5 for each formula below. The problem is that I keep getting #VALUE! result. It's because some cells in the range have #N/A in them, but I can't control that.

Here is my formula:

=SUMPRODUCT(--(E9:E70="P"),D9:D70,F9:F70)

=SUMPRODUCT(--(E9:E70="A"),D9:D70,F9:F70)

=SUMPRODUCT(--(E9:E70="C"),D9:D70,F9:F70)

How can I use this formula if for example cells D15-17 have no values or are #N/A?

I have a sheet with repeated dates for several months and I need to break out data by week and then by certain criteria. I can do 1 or the other but combining the COUNTIF formula and the SUMPRODUCT formula has proven to be beyond me.

What I need to do is have the formula return a sum of all of the fields in colG that are >5 within a date range. Once I find that # I have to divide it by another field and multiply by 100 to get the percent.

I'm looking for a formula for use in powerpivot, that can convert the following formula (I do not wanna use any VBA, only generate a caluculated column in powerpivot, based on a formula)

[Code] .....

The formula checks for 3 different values, and returns a status code for each. If no match is found it returns "no match".

The formula looks for the criteria (1234 or 1857201 or 1857206) in column2 (item) and writes a status code in column3 (output). At the same time it also checks for simular order numbers (column1). So the same status code is present for all order-number rows. (If a match in column2 / item is found)

See the excample in regular excel here: [URL] ....

I have a sumproduct formula based on some criteria, but I don't know how add another criteria wherein I need to exclude in the count if the date in column F is 1/1/2009

I am trying to sum up column V, when for a specific date in column z, and only sum when the two names EEM, Merri1* are involved. I used the * because there are a couple of variations for MErri1 after the 1. The formula is not working. I believe it's the way I'm combining this

I have a few varieties of SumProduct-formulae that are very helpful when dealing with numbers and/or letters in set conditions.

Like this one, which counts rows where conditions are met in four columns: =SUMPRODUCT(--(Z413:Z432="G");--(AB413:AB432<-3);--(AC413:AC432>0,4)*(AD413:AD432>5)) and this one, which sums the values of the same =SUMPRODUCT(--(Z413:Z432="G");--(AB413:AB432<-3);--(AC413:AC432>0,4);--(AD413:AD432>5);(AD413:AD432))

How does one make these two do their respective jobs when one or some of the columns are conditions for the next column - with their changing values, and thereby changing conditions?

Instead of "bigger than 0,4" as the condition for the AC part, it should be something like "bigger than it's AD counterpart" (AD value on the same row).

I have a few combinations of these "internal" measurements to do (the AB in addition being < than a certain percentage of the AC, and so on) but first of all I need a solution to the placement of the > and < signs.

I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.

I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.

I've used the sumproduct formula very sucessfully in a workbook. The workbook is used to monitor discrepancies routed to other departments. Column U has the status of the discrepancy (Open, Closed, Cancelled etc). The below formula returns the number of discrepancies raised to a particular department. Now I need to tweak the formula to exclude values "Cancelled" found in range $U$119:$U:417.