I have a table in word that I'm trying to copy into excel.
The problem is one of the columns in the row in that table may have multiple lines with hard returns.
When I copy and paste into excel, the result gives me multiple lines. I want a single line, with the exact multiple text in a single cell. How can I do this?? Nobody in the world seems to know.
To try this set up a word table with a single row, 3 columns. In the 3rd column put the following value.
Value 1
Value 2
Value 3
Now copy the entire row and attempt to past into excel. Watch as it creates 3 rows.
I import data into an excel spreadsheet where a unique job number may have multiple costs against it. These import as separate lines, repeating the job number.
The data imports on a sheet called 'DataImport'. From that sheet I transfer some of the imported fields onto another sheet.
What I need to be able to do is transfer the job number and a sum of the costs onto the other sheet.
The data is run regularly and I delete all the fields on the DataImport sheet in the macro each time the import is run.
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
" JOES TOWING SERVICE [0123451] 123 STREET
CALEDONIA FL 12345 " "BUBBA / SHOP ACCURATE AUTO SUPPLY INC [0234567] 21234 HYDRAULIC DR
I have a challenge where in have a list of about 4000 rows and each cell have mutiple lines. ( i know there is a thread about this but that did not address my issue).
So my data is as follows - (I have attached teh sample file)
"Pari bom - GP and CFO 02547895452 pari@gmail.com
papa bom - GP and CFO 23365789541 papa@gmail.com
mama bom - CFO 2587412589 pari@gmail.com
nana bom - CFO 2587412589 nana@gmail.com
masi bom - CFO 2587412589 masi@gmail.com
"
I want to be in a position to seperte each line in exclusive rows and then seperate teh name, number and the email ... the later eing easier but cant get my head around seperating the cells.
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
147943F00KNQ TTHBF251863100 REF VINS DU MONDE SA O/RTT HBF251863100
I need a macro to transform my multiple lines cell as above ( 5 lines ) into a one line cell as below.
REF VINS DU MONDE SA
As the cells needing changing will always be different it would be good if I could have a macro working on the selected cells only, not a specified range.
up to ten such entries may appear in each cell with an arbitrary number in each cell. They were entered using the ALT+Enter method. Is there an easy formula to extract each row (such as 44049,99820,'1') to use in a formula. If there are two entries I would like to write two separate rows like:
LINE 34567,43510,'1' LINE 44049,99820,'1'
If a macro would be required I understand and could use that also.
I am using Excel to generate a CSV file to load into a industrial cutting machine. The CSV file is used to import the cut list. As such formatting and the data per cell in Excel is important.
What I am presently trying to do is input the dimensions and type of the overall part and have the individual pieces be generated in a second sheet. I can presently do something of the sort using extensive 'if' statements. The problem with this is that I can only generate one line for every line I enter.
So this leads to what my problem is. I want to be able to have the info on 'Row one' 'sheet one' generate its parts list (which maybe 1-3 rows) and post that to sheet 2. Then 'row two' 'sheet one' generate it's info, but place it into the next unused row on sheet two. One of the issues I am having is that each row on sheet one may need to generate between 1-4 lines, maybe more, and I don't know how to not overwrite or have gaps on sheet 2.
Am I looking at going into macros or learning VBA?
(This is recorded). assuming that range "A1:A15" is where text for this comment is stored from a different VBA program.(15 number of line is the max i have programmed to accept). assuming there are 10 cells currenty full. how can i add this 10 text lines to a comment box.
I have a problem that i don't know how to solve. I have one cell with values like this: 127;71;512;458;1250;722;2154;742;29;350;
and what to put in lines like this:
127 71 512 458
Has i have a lot of data in the cell and everyday it changes, i take several hours doing it manually. I have tried using the command data/ text in colluns but because i have huge data it leaves a lot out. Do you have any idea how to put that values in lines automatically?
I have around 21 excel files in a particular folder all the files column headings are same and but number of line differ from 0 to 50K. Overall all 21 files will have more then 2 Lakhs lines.
i require a code which consolidate the all 21 files in to single workbook. if first sheet in full then data should copy to next sheet, so on. I also require file name in the first column of destination file when files are being copied.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers) NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell) Enabled 10.10.10.0 50 TEST SITE 1 Enabled 10.10.20.0 50 TEST SITE 2 Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I'm looking to do some simple maths with ranges in Excel but I'd like a way to be able to input all these formulas automatically although I am pretty sure a single formula per column could do it all automatically. I've got to put the sums in AD to AF on the first line of each location, but the maths is for the entire location's range.
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I am looking for creating a dynamic meeting log/calendar for my team. There's a couple of elements to my questions below:
I have a log with columns such as "Meeting Date", "Client", "Attendee" and have also set up month calendars on separate tabs which automatically update the dates according to a "Year" toggle using Janoffset, Feboffset, etc.
What I would like to do is have these calendars automatically populate a cell beneath each date with any meetings on that day. The client name and then a space then the attendee in brackets would be sufficient and with each meeting having its own line in the cell).
I have gotten a Vlookup working but have run into two snags: 1) where there is more than one meeting on a single day 2) I can only return one piece of information in the cell or otherwise have it blank, I can't have the client name AND attendee.
Is there any way to lookup all of that information in the one cell or is this just a pipe dream?
I have attached my workbook which contains my workings so far and in the first cell of Jan shown the "ideal" format. I'd like the data in.
The following IF statement isnt working, so im missing something. If A2 says YES, i want the cell with this statement to be blank. However, if A2 has a date, I want this cell to be that date + 45 days. How can I make this correct?
Looking for a formula (not macro) that can do the following:
I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.
The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...
how do I save multiple items selected from a userform listbox to a single cell on a worksheets? How do I have those values display in a listbox on a userform for editing data sets?
In a workbook I have a tab with multiple columns containing names, activity codes, billed hours, etc. On another tab I have created a budget for which I use the Excel SUMIFS function to check the database in the first tab for relevant entries and add them together in the budget sheet.
Now here's for the tricky part. On the budget sheet the names are not mentioned, only the job titles. So these are grouped together. This means that the first tab shows only names, while the budget tab only shows the function title.
The function I have used thus far is this:
Formula: [Code] ......
The first part refers to the column containing the billed hours, the second part refers to the column containing the names (criteria range 1), the third part refers to a specific name (criteria 1), the fourth part refers to the column containing the activity codes (criteria range 2), while the fifth part refers to a specific activity code (criteria 2).
This works really well as long as the budget tab only mentions the names, yet it only aggegates at the job title level. Would it be possible to use the same SUMIFS function to search the database for, say, all the names that fall within one specific job title? Essentially that would result in this somewhat bulky function:
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
I have to maintain freight cost according to the shipment weight. Our shipper has different charges for different scale/quantity of shipment. For example, according to the attached picture; Rate for up to 10 Kilo is $ 20 per kilo. For weight more than 10 kilo and up to 20 kilo, Rate will be $ 15 per kilo and so on.
Now, suppose my shipment weight is 28 kilo. My cost will be $ 200 for 10 kg, $ 150 for next 10 kg and $ 80 for the last 8 kg. In total $ 430.
I have to calculate the total cost separately. I wonder if I could devise a formula by which I could put the weight in a single cell and get the freight cost instantly.
In a single cell, I would like to show 2 values: a currency and a percentage. So A1 and A2 has values, say 50000 and .10 respectively (these are derived via formula, if it's of any relevance). What I ultimately want is "$50,000 and 10%". I've originally thought about adding the "$", " and ", and "%" separately, but I need the currency value to include commas.
