I have a woorkbook with a sheet for each week. What I want to be able to do is select 2 cells and click a macro button that will ask how many weeks to copy these cells to.
I could then enter, say "10" and the cells would then be copied to the ten proceeding weeks workbooks. Assuming that the sheets are in order!
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
As an answer to a post about vba script for consolidating workbooks based upon pre-defined cells,
Sub ConsolidateDate()
Dim wbDst As Workbook
Dim wbSrc As Workbook
Dim wsDst As Worksheet
Dim wsSrc As Worksheet
Dim I As Long
Set wbDst = ThisWorkbook
Set wsDst = wbDst.ActiveSheet
With Application.FileSearch
.NewSearch
.FileType = msoFileTypeExcelWorkbooks
.LookIn = "C:Myfolder"
For I = 1 To .FoundFiles.Count
Set wbSrc = Workbooks.Open(.FoundFiles(I))
Set wsSrc = wbSrc.Worksheets("Data")
wsDst. Range("A" & I) = wsSrc.Range("A2")
wsDst.Range("B" & I) = wsSrc.Range("C6")
wsDst.Range("C" & I) = wsSrc.Range("D7")
wsDst.Range("D" & I) = Dir(.FoundFiles(I))
Next I
End With
End Sub
I was hoping someone could translate the meaning of this code for me, I am a beginner with using VBA and I am trying to write VBA script for a similar task I am working on. The references to cells A2, C6 and D7 were used as an example of cells to be copied.
I about 150 different workbooks that I need to copy the cell data from the first sheet to a second workbook
The code is running all the way through to the "Clear values?" pop-up box, BUT nothing is actually being pasted into my second workbook
Sub TransferData()
Dim wkb As Workbook, wks As Worksheet, LastRow As Long
Dim FilePath As String, FileName As String
Dim ws As Worksheet, blnOpened As Boolean
'Change these variables as desired...
FilePath = "C:UsersPipeline2DesktopOveralnd Focal Points" 'change path here
[code]....
I have two workbooks, one with two sheets and the other the new workbook where I want to copy the cell values. What I am trying to accomplish is:
1. From Workbook book1. sheet2. cellb (dynamic row values) I want to look for the value in book1.sheet1.cellb (static row values). If it is found I want to copy the cell values from book1.sheet2.cellb, celld, and celle to book2.sheet1.cellb, celld, and cellg. If there in a new value in book1.sheet2.cellb, I want to copy the same values (cellb, cellc, celld,celle) to book2.newrow.
I am attching the two workbooks with sample data, for clarification.
I hava a macro-routine in my workbook: "SwitchBoard.xlsm"
The macro opens a workbook: "OriginalFile.xlsx"
When OriginalFile.xlsx is opened I will select some of the sheets in this opened book, let the macro copy them into "SwitchBoard.xlsm" as new sheets before the macro proceeds and "do stuff" after they are renamed (I have a routine for this renaming.)
How do I programme this temporary macro-pause/stop-proceed when I manually select the sheets I will copy for further use in SwitchBoard.xlsm?
I have Book1 (reference workbook) and Book2 (where i copy values from Book1)
Now I have macro to fetch the datas and paste the values in the format below.
But I can only doing this for one reference workbooks. But i need to add more reference workbooks in a file and paste to Book2. (etc: Book1, Book3, Book4, ....... to Book2)
Book2 looks like:
A1 B1 C1 D1
Name Adress Age Sex
Ozan xxxxxx 27 M
Here' s the Code.
Option Explicit
Sub TransferData()
Dim wkb As Workbook, wks As Worksheet, LastRow As Long
Dim FilePath As String, FileName As String
Dim ws As Worksheet, blnOpened As Boolean
'Change these variables as desired...
[Code] ........
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies View RelatedI have 2 worksheets, A and B. In both worksheets there is common data in column A (account ID). I would like to find a way to return all of the data for the matching row in worksheet B and have it pasted into the matching row in worksheet A.
So in the example below, I am looking for a function that will match on Account ID in both worksheets and then paste the results from Dataset 1, 2 and 3 into the row with the matching Account ID in worksheet A.
Worksheet A
Account ID
Column to paste matching rows from Worksheet B
1
2
Worksheet B
Account ID
Dataset 1
Dataset 2
Dataset 3
1
AAA
BB
CC
4
EE
DD
FF
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters()
Dim CurrentFile As Workbook
Dim wbOpen As Workbook
[Code]....
I have a Pivot Table. I have two Columns Currently Current Week and Previous Week. The Values are displayed as a count for the Status Field. I would like to know if it is possible to add a calculated formula that will take the count difference between Current Week and Previous Week?
View 1 Replies View RelatedI have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border.
However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets
2. Open Workbook A-2014 paste the sheets
3. Save and close Workbook A-2014
4. Close workbook A without saving
then doing the same for Workbook B, etc.
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
View 2 Replies View RelatedI have a master workbook that needs to be updated with information from approximately 900 other workbooks. The master workbook is layed-out with the name of each of the 900 workbooks (minus the .xls extension) located in column A. The number needed from these 900+ workbooks is consistently located in cell J20.
Is there an easy way to open each of these 900 workbooks, copy the number from cell J20 and paste the number in the correct location in the master workbook?
I'm trying to copy data from several workbooks into another - in Excel 2003. The following code works perfectly except when there is only the header row in the target workbook. Then I get the following error message, "Run time error 1004. Application defined or Object defined error". How can I get it to find A2 the first time - without coding A2 in?
View 4 Replies View RelatedWhat I am trying to do.
Code:
Sub COPYCELL()Sheets("Distribution").Select
Range("B7:X84").Copy
Windows("SecondWorkbook.xlsm").Activate
Sheets("Distribution").Select
Range("B7:X84").Paste
End Sub
Basically I want to copy cells B7:X84 in the current workbook on the Distribution tab and paste them into Secondworkbook.xlsm that I have already open on the Distribution tab in the same range. There are graphs though so
I am not sure if that has an impact. When I do it manually I copy and then paste into SecondWorkbook and then I copy what I just pasted and paste special values.
I have several workbooks (around 100) that I need to grab a certain range out of (C2:C4). Contained in this range is a title and two numbers stored in row format. I need to copy this same range in every workbook, transpose the information and then insert the information in the consecutive rows.
Right now I do it manually and it takes a lot of time I want to set this up so I can import it into a ms access table at some point.
Is it possible to copy a Cell Name from one workbook to another
I have defined different cells different names. Trying to copy this only gives me values and format of the cell, but not names.
Is there a way to copy the names of cells and ranges to another workbook?
I have a workbook containing numerous tabs.
I would like to be able to run a macro which copies the relevant tabs to a new workbook and save it with a predifned name.
I have A table (50 rows);
Column A = Name of new workbook
Column B:J = Name of tabs which need to be copied to the new workbook
Notes:
1) Some of the columns (B:J) may be blank
2) The tab names in the table will definately exist in the original workbook
I am learning VBA so that I can do greater programming. I am trying to copy and paste a dynamic range from one book to the other. My Statements are as follows.
With Workbooks("Actual Cash Flow.xlsx.").Worksheets("909")
.Range("C1:E" & .Cells(Rows.Count, "E1").End(xlDown).Row).Copy Destination:=Workbooks("Master Cash Flow.xlsm").Worksheets("Master Cash Flow").Range("K1")
End With
I tried this and it worked within the same work book, but when moving to a separate workbook I am having issues, and coming up with the error "Subscript is out of Range"
I am attempting to move data between two spreadsheets and have written a macro that initially copies one cell E2 then pastes it correctly into another workbook. I now need to modify the macro to include additional ranges. E2, E3, G2, H2, N1 to U3. I am stuck to the best method of selecting these ranges and then pasting them as I cannot get it to work. I have included a copy of the code below.
Sub getdata()
Dim filename, fileselected
Dim a1(1 To 20)
Dim WB As Workbook
ChDrive ("g:")
ChDir ("G:Folder name")
fileselected = Application. GetOpenFilename("Excel Files, *.xls", , "Select your Files", , True)
If StrComp(TypeName(fileselected), "Boolean", vbTextCompare) = 0 Then
ChDrive ("g:")
Exit Sub
End If.......................
I have a problem with one macros. That VBA code copy every row into different sheet.
I've tried to copy every row + one row, which appears to be a title row. I failed
Please someone to view that code and tell me what corrections i have to do.
One more thing:
How can i Copy that sheets into different files ?
Here is the code:
Sub PrepareForPaste()
Const copySize = 1
Dim repeatCount As Integer
Dim startRow As Long
Dim endRow As Long
Dim lastRow As Long
Dim LC As Integer
Dim sourceSheet As String
I want to copy a perticular coloum in one xls sheet ie a.xls(sheet3) coloum to another xls ie b.xls in sheet2(coloum) of that xlsHow can i do this using a macro is their any other better way of doing this
View 7 Replies View RelatedI got 2 workbook called book1 and book2. Book1 is design to be form in the spreadsheet for the user to fill up the particular data. Book2 is the password protected workbook. I created a button in book1 such that when the user click the button, it will automatically transfer the data in book1 (worksheet1) to book2 (worksheet1) without opening up the book2 during transfer data. It simply add a record in the book2 (worksheet1). Can I write such a code to do this?
View 6 Replies View RelatedI am looking for an VBA solution to copy value from multiple workbooks in the same folder.
The master workbook will contain two columns: a list of date (col A) and value (col B) copy from other workbook.
Those multiple workbooks have the same structure which contain a date (A1 cell) and number value (B1 cell)
Basically I want to perform
i) Date matching A1 value in individual work with master workbook
ii) If entry date is matched, then copy B1 value to column B in master book
we have a Workbook... in this workbook we want run a VBA or Macro which macro copy a specific sheets (Sheet Name "Abstract") this sheet but when we copy this sheet then in sheet name show file name where this sheet come..
for eg.
if Abstract sheet copy ABC.xls file then sheet name show in my workbook ABC
We have 205 file in the folder (folder store in E:yr 13-14) is it possible that in few files abstract sheet not found..
1. To compare two workbooks with exactly the same columns- Target and Source
2. The target workbook basically has more row items than the source since this is considered the masterlist.
3. The source worksheet's names and contact details are filled out by different sources but will still maintain the same columns.
4. The records of the source workbook must be transferred to the Target workbook reference to its appropriate IDs.
5. The record of source book may be updated and will be fed to the Target book but must not copy the record that is already present in the masterlist.
Below is the code I was working at
Public Sub CopyRecord()
Dim sRng As Range
Dim tRng As Range
Dim sCell As Range
Dim tCell As Range
Dim tLR As Long
Dim sLR As Long
Dim sCount As Long
'Find last row of target sheet
Workbooks(Target).Sheets("Sheet1").Activate
tLR = ActiveSheet.UsedRange.Rows.Count
'Find last row of source sheet
Workbooks(Source).Sheets("Sheet1").Activate
sLR = ActiveSheet.UsedRange.Rows.Count..........
I have a master book which i need to paste data, the issue is when the data is returned to me the original name of the workbook is sometimes changed to suit the individual, I recorded this macro but in essence i need one that can be universally used, below is the code i used;
Sub convetor()
'
' convetor Macro
'
' Keyboard Shortcut: Ctrl+l
[Code].....