Copy Particular Tabs Into New Workbooks
Jun 4, 2009
I have a workbook containing numerous tabs.
I would like to be able to run a macro which copies the relevant tabs to a new workbook and save it with a predifned name.
I have A table (50 rows);
Column A = Name of new workbook
Column B:J = Name of tabs which need to be copied to the new workbook
Notes:
1) Some of the columns (B:J) may be blank
2) The tab names in the table will definately exist in the original workbook
View 9 Replies
ADVERTISEMENT
Nov 23, 2008
There are two teams in my department, and each is assigned to maintain their respective work book and I'm looking to link them in order to save some time.
Team A - Responsible for receiving Invoices (Bills) and entering them in an excel spreadsheet when received and update when bill is paid. Only one tab in this workbook.
Row A - Name of company billing us
Row B - Invoice #
Row C - Invoice Amount
Row D - Once Bill is paid the check amount is entered here
Row E - Balance Due (Row C - Row D = Row E)
Team B - Is Responsible for maintaining a list of all checks issued. All of the checks issued to pay the bills received by Team A are entered here plus other checks to pay a variety of different stuff. On this workbook a new tab is created every month. One tab per month. Since we need to follow accounting rules and record the check NOT on the month it was paid, but on the month the service was provided. for example I might be paying a bill in the month of November for services that were provided in September, so I would need to enter this check in the September Tab.
Row A - Name of company check is paid to
Row B - Invoice #
Row C - Amount Requested to be paid
Row D - Reason for payment
Row E - Date of check issued
Row F - Amount paid
Row G - Check #
Here is what I want to do.
I want to link both of these workbooks so that when Team B fills out the information of the check issued this will automatically update the Workbook of Team A so that
the balance is zeroed out.
He is my challenge. Workbook of Team B has multiple tabs so I can't just do a simple Vlookup and also every month a new tab is created (very dynamic workbook).
TO add to this in Team B's worksheets have to be in alphabetical order, which means that rows are inserted everyday. for example if I paid yesterday to A and C, I enter company A in Row1 and Company C in row 2 but today I received invoice from Company B so in order for them to be alphabetically I would need to insert a row between Row1 and Row2. So if I had links to this workbook they wold not update when the new row is added.
View 14 Replies
View Related
Apr 12, 2013
I have timesheets in work, where i created basic formulas to display times & worked hours etc. I also have named ranges on 4 of the sheet.
The sheets are named as the department (area 1, stock control etc.). All the sheets are identical in terms of layout, only the names of staff and hours worked are different.
When i created them, i tried to be pro-active and created flippin loads, through to October this year. Problem being i created a Summary sheet for each workbook, which in short takes all names from all areas and collates them on the last tab, puts Mon-Sun across the top, enters the hours into the relevant days, merges hours worked in different areas and also splits the hours worked over each day.
Everything is working flawlessly.
Except, the above evolution of the sheet was done after i mass created the timesheet, and as such i need to manually open each sheet, set the ranges and name them, add a summary sheet, add the macro, save and close.
Is it possible to create a macro on book1, that when i open however many other workbooks (the actual timesheets) the code would set and name the ranges for me?
The time sheets are all named according to the week -> 'W.C - 08.04.2013', 'W.C - 15.04.2013' etc.
View 1 Replies
View Related
Jun 26, 2014
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets
2. Open Workbook A-2014 paste the sheets
3. Save and close Workbook A-2014
4. Close workbook A without saving
then doing the same for Workbook B, etc.
View 5 Replies
View Related
Aug 20, 2008
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
View 5 Replies
View Related
Jan 10, 2014
I have a program that takes a templete, copies it, fills in some information and then renames the tab based on text in a cell on that sheet. The code loops so I end up with about ten tabs that are created from the Template.
I want to move these newly created tabs to a new Workbook.
is there a way (code) that will move all the tabs except ones delineated in the code - like the tab named "Template"?
View 1 Replies
View Related
Nov 30, 2011
I am creating a code that loops through several list and Copys and paste the value in a given cell to another cell. However I would like it to do so without switching to the other tab. Additionally I also don't want to freeze the worksheet because I have a display that shows progress through a conditional formatting thing. I need it to stay on the "Rotation" tab.
Sub Roladex()
Dim RegionPaste As Range
Dim row As Integer, row1 As Integer, row2 As Integer
[Code].....
View 3 Replies
View Related
Apr 27, 2009
I have an excel sheet with 20 different tabs. All the tabs contains 1st column with same header as Customer ID.
I need a macro which copies the 1st column from every tab and paste it in 21st tab.
View 9 Replies
View Related
Feb 27, 2009
This macro helps me create a blank worksheet and automatically names it from the list in column A. Unfortunately, it adds the worksheets to the left of my 'master' sheet called "Tab Names". When I try adding "after" when it adds a new sheet, I keep getting a "compile error: Expected: end of statement". I am positive you will know what steps I'm missing.
' Vendor List Subroutine to
' Open New Worksheet called Tab Names worksheet
' With data from Tab Names
' Rename sheet to name from list and start again
' For all names in list
Sub NewTabsFromList()
Dim cCell As Object, i As Integer 'Two variables cCell (current Cell) object and i (standard counting integer)
Cells(1, "A").Select 'Ensure that we start each time at the top of the worksheet
Application. ScreenUpdating = False 'Turn of screen updates whilst macro is running
For Each cCell In Range(Cells(1, "A"), Cells(1, "A").End(xlDown)) 'Will run our code through each cell with text
Set NewSheet = Sheets.Add(Type:=xlWorksheet) 'Add new worksheet
NewSheet.Name = "Tab Names Worksheet" 'rename worksheet
Sheets("Tab Names worksheet").Name = cCell.Value
Next cCell
End Sub
View 4 Replies
View Related
Jun 11, 2014
I have a macro that takes data in rows 1 through 500 from many tabs and collects them in the summary tab.
I would like to write a macro that only selects rows that have data in Column A. Therefore, reducing the number of rows copied from all tabs from 500 to only a few that contain data that I really need.
This is what i currently have:
[Code] .........
View 8 Replies
View Related
Feb 20, 2012
I need to have cells from sheets to automatically transfer to a separate total sheet...
So in other words for every tab/sheet I have...I need cell B10, once populated, to automatically transfer to a designated cell on a separate Total tab/sheet...
I tried =Sheet2!B10...but when I copy it into the next cell it reads...=Sheet2!c10...what I need is for the sheet to change...but the cell to stay the same...
View 1 Replies
View Related
Jul 21, 2013
is it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?
I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.
Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?
Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?
The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)
View 1 Replies
View Related
Jul 16, 2014
I have a worksheet that contains about six different tabs. When this form is completed some users might want to have certain tabs copied into a different workbook. Unfortunately each user might want to copy different tabs. I was wondering if there was a Macro that I could write that would ask the users which tabs they want to copy into a new workbook.
View 4 Replies
View Related
Jun 11, 2008
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I don’t want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
View 7 Replies
View Related
Mar 25, 2014
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
View 4 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Dec 5, 2008
I have a master workbook that needs to be updated with information from approximately 900 other workbooks. The master workbook is layed-out with the name of each of the 900 workbooks (minus the .xls extension) located in column A. The number needed from these 900+ workbooks is consistently located in cell J20.
Is there an easy way to open each of these 900 workbooks, copy the number from cell J20 and paste the number in the correct location in the master workbook?
View 5 Replies
View Related
Jul 22, 2009
I'm trying to copy data from several workbooks into another - in Excel 2003. The following code works perfectly except when there is only the header row in the target workbook. Then I get the following error message, "Run time error 1004. Application defined or Object defined error". How can I get it to find A2 the first time - without coding A2 in?
View 4 Replies
View Related
Mar 20, 2013
What I am trying to do.
Code:
Sub COPYCELL()Sheets("Distribution").Select
Range("B7:X84").Copy
Windows("SecondWorkbook.xlsm").Activate
Sheets("Distribution").Select
Range("B7:X84").Paste
End Sub
Basically I want to copy cells B7:X84 in the current workbook on the Distribution tab and paste them into Secondworkbook.xlsm that I have already open on the Distribution tab in the same range. There are graphs though so
I am not sure if that has an impact. When I do it manually I copy and then paste into SecondWorkbook and then I copy what I just pasted and paste special values.
View 6 Replies
View Related
Oct 19, 2007
I have several workbooks (around 100) that I need to grab a certain range out of (C2:C4). Contained in this range is a title and two numbers stored in row format. I need to copy this same range in every workbook, transpose the information and then insert the information in the consecutive rows.
Right now I do it manually and it takes a lot of time I want to set this up so I can import it into a ms access table at some point.
View 9 Replies
View Related
Nov 19, 2007
Is it possible to copy a Cell Name from one workbook to another
I have defined different cells different names. Trying to copy this only gives me values and format of the cell, but not names.
Is there a way to copy the names of cells and ranges to another workbook?
View 8 Replies
View Related
Nov 14, 2009
I am learning VBA so that I can do greater programming. I am trying to copy and paste a dynamic range from one book to the other. My Statements are as follows.
With Workbooks("Actual Cash Flow.xlsx.").Worksheets("909")
.Range("C1:E" & .Cells(Rows.Count, "E1").End(xlDown).Row).Copy Destination:=Workbooks("Master Cash Flow.xlsm").Worksheets("Master Cash Flow").Range("K1")
End With
I tried this and it worked within the same work book, but when moving to a separate workbook I am having issues, and coming up with the error "Subscript is out of Range"
View 8 Replies
View Related
Nov 7, 2006
I am attempting to move data between two spreadsheets and have written a macro that initially copies one cell E2 then pastes it correctly into another workbook. I now need to modify the macro to include additional ranges. E2, E3, G2, H2, N1 to U3. I am stuck to the best method of selecting these ranges and then pasting them as I cannot get it to work. I have included a copy of the code below.
Sub getdata()
Dim filename, fileselected
Dim a1(1 To 20)
Dim WB As Workbook
ChDrive ("g:")
ChDir ("G:Folder name")
fileselected = Application. GetOpenFilename("Excel Files, *.xls", , "Select your Files", , True)
If StrComp(TypeName(fileselected), "Boolean", vbTextCompare) = 0 Then
ChDrive ("g:")
Exit Sub
End If.......................
View 2 Replies
View Related
Jun 27, 2007
I have a problem with one macros. That VBA code copy every row into different sheet.
I've tried to copy every row + one row, which appears to be a title row. I failed
Please someone to view that code and tell me what corrections i have to do.
One more thing:
How can i Copy that sheets into different files ?
Here is the code:
Sub PrepareForPaste()
Const copySize = 1
Dim repeatCount As Integer
Dim startRow As Long
Dim endRow As Long
Dim lastRow As Long
Dim LC As Integer
Dim sourceSheet As String
View 6 Replies
View Related
Jul 6, 2007
I want to copy a perticular coloum in one xls sheet ie a.xls(sheet3) coloum to another xls ie b.xls in sheet2(coloum) of that xlsHow can i do this using a macro is their any other better way of doing this
View 7 Replies
View Related
Jul 25, 2007
I got 2 workbook called book1 and book2. Book1 is design to be form in the spreadsheet for the user to fill up the particular data. Book2 is the password protected workbook. I created a button in book1 such that when the user click the button, it will automatically transfer the data in book1 (worksheet1) to book2 (worksheet1) without opening up the book2 during transfer data. It simply add a record in the book2 (worksheet1). Can I write such a code to do this?
View 6 Replies
View Related
Aug 16, 2014
I am looking for an VBA solution to copy value from multiple workbooks in the same folder.
The master workbook will contain two columns: a list of date (col A) and value (col B) copy from other workbook.
Those multiple workbooks have the same structure which contain a date (A1 cell) and number value (B1 cell)
Basically I want to perform
i) Date matching A1 value in individual work with master workbook
ii) If entry date is matched, then copy B1 value to column B in master book
View 1 Replies
View Related
Feb 6, 2014
we have a Workbook... in this workbook we want run a VBA or Macro which macro copy a specific sheets (Sheet Name "Abstract") this sheet but when we copy this sheet then in sheet name show file name where this sheet come..
for eg.
if Abstract sheet copy ABC.xls file then sheet name show in my workbook ABC
We have 205 file in the folder (folder store in E:yr 13-14) is it possible that in few files abstract sheet not found..
View 3 Replies
View Related