Copy Data To New Sheets
Mar 6, 2008
I have an application that creates a new worksheet in Excel each time a particular event happens. My processing is centred on a single master sheet into which I want to copy selected data from each newly opened sheet from the external application. Data from the next `new' sheet would replace the older data previously copied into the master sheet as the external application marches through the sequential series of events (or I could clear the master sheet cells after each cycle is complete).
So in essence I need to
a) Recognise the creation of a new sheet by the external application and make that the active sheet
b) Copy data from selected cells in the new sheet to fixed cells in the master sheet, overwriting previous data .
c) Carry out some operations
d) Delete the active sheet when those operations are finished.
e) Await the next new sheet from the application.
I'm trying to pin down an answer to a, b d, and e.
View 3 Replies
ADVERTISEMENT
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Mar 8, 2014
We have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)
I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).
The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.
I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?
In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).
Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.
DCC foler.jpg
View 10 Replies
View Related
Jan 27, 2012
Copying data from one sheet and pasting it in different sheets with names.
For example : i have data which has details of all GL account and i want to segregate the data GL code wise into different sheets in the same file with the gl code name.
View 9 Replies
View Related
May 26, 2014
I am writing a vba code where i want compile data from different excel files.
Private Sub CommandButton1_Click()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
[Code]....
I have been using this code to compile data but now i want if sheets data is less than 10 so do not copy..
View 3 Replies
View Related
Mar 6, 2014
I have a workbook (Sheet 1 contains - 6 columns and 1000's of rows). Column B has sensor type. Is there away to copy all data the deals with each sensor and paste it on a new sheet in the same workbook and name these new sheets by sensor type
Example
Date Sensor IP Address DNS Error
1/1/2014 Unix 1.1.10.10 fatty clock error
1/1/2014 HP 1.1.2.3 slim power isues
Please note I have over 50 sensor types.
View 4 Replies
View Related
Aug 26, 2009
I am using the following code to copy data from multiple tabs to a summary tab - it is only supposed to copy the data in the rows if the cells in Column A have data in them, its working, but for some reason it is copying the data in columns Y and Z for four extra rows even though there is no data in column A for those rows.
View 5 Replies
View Related
Jun 30, 2012
I am trying to copy data from three separate tables (from sheet 1, 2 and 3) into 1 table (sheet 4). I do not want to combine the data, instead have all of the data in one place.
I have tried the consolidate function, but am not having much luck?
View 6 Replies
View Related
Apr 16, 2009
I have workbook named "Distribution and Revenue" which is contained 14 sheets , which names are like "UB Distribution", "UB Revenue",
"SB Distribution", "SB Revenue". I want only all Revenue Sheets Data (leaving Last Row) to be copied to another workbook "F:DataFinal Result.xls" in sheet named All Revenue.
For example:
UB Revenue
BCDEFGHIJK2Product Quantity DetailProduct Revenue Detail3DateRTDPSETURTDPSETUTotal Revenue41-Apr-09 1,150 500 2 200 989 475 76 190 1,730 5Total:- 1,150 500 2 200 989 475 76 190 1,730 ............
View 9 Replies
View Related
Apr 11, 2002
Input Workseet:
Col A: Date
Col B through M: Headings are employee names, data is how many hours of vacation per DATE.
User will enter a date in column A, and then the corresponding number of vacation hours a person took that day. There are a dozen or so employees, so we're only entering a record on the dates that someone has taken vacation time. Dates are mm/dd/yyyy format. The hours are number/two decimals.
What I would like:
An update command button (hey, I can actually do that part!) that has an on-click that:
Loops through each column B through M, and copies the information to the employee's individual sheet.
The individual sheets:
Columns are:
A = Date of vacation
B through M are months Jan through Dec.
Data starts *paste* in cell A12, where the date of the first vacation day they take should appear. If it was a half-day in February, .5 (or .50) will appear in cell A14.
If it's not clear, I'm happy to send the file! If you put your email here, I'll send it right away. If you email me at home, it'll be a few hours before I can send.
No rush on my part.
Really appreciate it!! I'm not a coder. I know small bits and pieces. When you start talking about Dim, I think of chinese food.
_________________
TheWordExpert
[ This Message was edited by: Dreamboat on 2002-04-11 10:20 ]
View 9 Replies
View Related
Nov 22, 2006
I'm sure this has been answered before. After an hour of searching I realized I just don't have the vocabulary to find it.
Here we go:
I have two sheets, sheetA and sheetB.
sheetA contains parent names (first and last), addresses, equipment, and serial numbers
sheetB contains parent names (first and last), addresses, and their child's name.
I need to match the parent from SheetA to the parent in SheetB and then copy the child's name from sheetB back to the correct record in SheetA.
View 8 Replies
View Related
Sep 8, 2007
I am trying to write a vba code which is attached to a button, that will do the follwing.
Take the data from one sheet and summarize it onto another one.
I'm not sure if I am going about it the correct way. My approach was going to be to copy all the data onto another page, sort it by columns A, B and C. But I've run into problems, I've attached a sample worksheet showing what I'm using and how I want to use it.
As well this is part of my code I started coming up with, am I on the right track?
[EDIT]
Ok so I've been playing around and thanks alot to bryce for making copying simplier, this is what I've gotten for my code so far (its a lot simplier than before)
Sub uTotals()
Dim wsData As Worksheet, wsResult As Worksheet
Dim DataRow As Long
Dim x As Integer
Set wsData = Worksheets("Material")
Set wsResult = Worksheets(" Totals")
DataRow = wsData. Range("A65536").End(xlUp).Row
For x = 1 To DataRow
wsData.Range("A" & x & ":" & "C" & x).Copy wsResult.Range("A65536").End(xlUp).Offset(1, 0)
wsData.Range("F" & x).Copy wsResult.Range("D65536").End(xlUp).Offset(1, 0)
wsData.Range("I" & x).Copy wsResult.Range("E65536").End(xlUp).Offset(1, 0)
Next x ...
View 8 Replies
View Related
Jan 8, 2008
I am trying to write a VBA code to conditionally copy and paste a range of cells on sheet A into sheet B if the specified cell value is not found on sheet B. Here's an example
On sheet A, there are phone numbers in column M that I need to find in sheet B. The reference column in sheet B is already a named range ("Description") which I'm using to conditionally format several cells in sheet A to turn green when the phone number is not found on B. This is the formula I'm currently using to do this "=AND( COUNTIF(DESCRIPTION, $M2)=0, $R2>0)" ...Obviously I'm using the AND function to tell the format to only work if the cell value of R is greater than 0.
What I would like to do to something very similar to what I already have in place, only now I would like to have a macro search through column M and instead of highlighting the proper cells...I would like to copy the associated row data from columns B:N in sheet A and paste special>values into A:M on sheet 2. Also, I need to keep the "R is greater than 0" condition in place.
View 3 Replies
View Related
Apr 18, 2008
I am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
View 6 Replies
View Related
Dec 18, 2012
I have a sheet (SHEET1) with a EAN code and a empty column I need to get a colour into from sheet 2.
I have to match EAN codes in Sheet 1, (Column X) with Sheet 2(Column E) and then pull the description from the corresponding row in Sheet 2(Column D).
I am sure I can use the VLOOKUP formular but I dont know how to input the code?
=VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)
View 2 Replies
View Related
Feb 8, 2010
I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 Replies
View Related
Jan 25, 2012
I am using the following code to copy data from multiple workbooks in a folder to one workbook.
Code:
Sub copy_files()
Dim wkb1, wkb2, wkb3 As Workbook
Dim i, lastrow As Integer
[Code]....
What changes are required in the above code to paste the data in different sheets on one workbook.
View 2 Replies
View Related
Apr 1, 2014
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
Code:
Sub sheets_merger()
location_path_file1 = Range("location_path_file1")
location_path_file2 = Range("location_path_file2")
file1 = Range("file1")
file2 = Range("file2")
[Code] .......
Below is the exact error message:
HTML Code:
Run-time error '1004':
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste.
* Select a rectangle that's the same size and shape, and then paste.
I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
View 8 Replies
View Related
May 2, 2014
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
View 1 Replies
View Related
Oct 1, 2007
I have a worksheet with a list of project managers and a bounc of data on them.
How can i make a new file with sheets for every project manager in the list and copy the data for each one into his own sheet ?
Every project manager has many lines (there are about 200 managers and 30 000 lines and 30 columns )
I have managed to create a sheets for project managers from a list of unique entries but that's all.
View 9 Replies
View Related
Jan 8, 2008
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
View 8 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
May 6, 2014
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
F-S886 (Material Properties Database)_DRAFT_5.xls
View 7 Replies
View Related
Mar 10, 2014
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll()
Dim ws As Worksheet
Sheets.Add.Name = "Summary3"
Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then
Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2)
End If
Next ws
End Sub
View 2 Replies
View Related
Feb 5, 2008
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies
View Related
Nov 3, 2008
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies
View Related
Jan 23, 2009
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
View 5 Replies
View Related
Jan 26, 2009
I have a macro that will not complete, and I can not figure out why. The macro is CHECK_for_Sheets_THEN_Copy_DATA:
View 3 Replies
View Related
