Copy Multiple Rows To Another Sheet On Next Available Line?
Dec 28, 2012
I am trying to copy multiple rows (ie: rows that have data in them) over to another sheet on the next available line.
I have the code to go through and filter the data that I want to use. Now I have anywhere from 1-50 rows of data all sequentially together that I need to either copy or move to another sheet ("Data") on the next available line.
I have this code so far:
Worksheets("To Be Worked").Range("B5:K5").Value = Worksheets("Data").Range("A1").End(xlDown).Offset(1, 0)
But this only includes 1 row so I either have to loop the VBA or expand the range to include multiple rows. Both of which I don't know how to do. And that code doesn't work too well either.
View 5 Replies
ADVERTISEMENT
Nov 17, 2012
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
View 5 Replies
View Related
May 17, 2014
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
View 5 Replies
View Related
May 29, 2006
In the attached wb I have 4 sheets. The macro selects a row then copies it to specified location. This works great. What I would now like it to do is match data in (MonthStats) column b then copy those rows to specified location. eg All rows containing AAA would be selected then copied to sheet AAA. I have searched various threads but without success
View 4 Replies
View Related
Jun 11, 2008
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I don’t want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
View 7 Replies
View Related
Apr 20, 2013
the code below was created by: JoeMo I'm trying to adapt, but I need to say which worksheet you were to NOT be copied
Code:
Sub MergeSheets()'Author: JoeMo
'http://www.mrexcel.com/forum/excel-questions/683803-copying-data-multiple-sheets-appending-master-sheet-reverse.html
[Code].....
View 1 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Dec 23, 2008
I have a multiple rows of data, but one column which is K has data like:
1020
1020
1020
1020
1020
1030
1030
1030
1030
1050
1050
1050
What i want my macro to do, is whenever that number in column K changes to copy all the data in row A thru K to a new sheet.
View 9 Replies
View Related
Jul 31, 2014
I am trying to take data from specific cells on PBI_DATA_SORT and paste it into a new line in PBI_DATA_SORT_TRACKING with a date and time stamp in separate cells.
I have been able to get it to copy from one to another but not with a date and time stamp.
Code:
Sub Macro3()
'
' Macro3 Macro
'
Sheets("PBI_DATA_SORT").Range("D139:H139,M139").Copy
[Code]....
View 5 Replies
View Related
Sep 23, 2008
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
View 9 Replies
View Related
Aug 12, 2014
I have is a list of the over 500 people with one line per college degree. Some have up to 4 or 5 degrees. Each have SSN as unique identifier.
I need to consolidate into one like per person with multiple columns one for each degree.
See attached : Test Degrees.xlsx
View 6 Replies
View Related
Aug 6, 2012
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
View 5 Replies
View Related
Sep 17, 2013
I'm having troubles with a spreadsheet and unfortunately don't know enough VBA to fix it. I have two columns, each with data like so (standard text) separated by a line break:
Object1
Object2
Object3
value1
value2
value3
And I need them separated like so:
Object1
Value1
Object2
Value2
Object3
Value3
with other items in the row from other columns applied to the new rows accordingly.
Any script/macro/tool (even non-Excel) to do this effectively (over 800 rows)?
View 3 Replies
View Related
Feb 23, 2013
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Mar 30, 2013
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
View 1 Replies
View Related
May 19, 2014
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
View 9 Replies
View Related
Dec 8, 2007
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
View 9 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Mar 14, 2014
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
View 5 Replies
View Related
Mar 27, 2008
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies
View Related
Mar 30, 2014
I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
View 4 Replies
View Related
Mar 13, 2014
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
View 2 Replies
View Related
Oct 2, 2009
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies
View Related
Jul 15, 2013
The senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
View 6 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Dec 18, 2006
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
View 9 Replies
View Related
Mar 14, 2013
The following code adds a new row at a given point (Based on a fomula in a column returning "1")
The code works well BUT I want to merge this new row from column A to coulmn M
Im not sure how to do this, (I dont want to merge the entire row)
Example Code:
Sub ExtLne()
Dim Lastrow As Long
Dim I As Long
Lastrow = Range("A" & Rows.Count).End(xlUp).Row
I = 1
While I
View 2 Replies
View Related
Feb 26, 2009
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies
View Related
Oct 2, 2008
I have a Excel workbook that has 31 sheets. One column(H) of each Sheets will have cells that will contain the word "OPEN" or "CLOSED". When I execute a macro or VBA code I need to scan each row of that column of the current active sheet. If the word is "OPEN" I need to copy all of the data in that row to the next sheet. If the word is "CLOSED" nothing has to happen. Before the rows are inserted into the next sheet. I have to find the first empty row and start inserting at that point. The sheets are labeled 1-32 so if I am on sheet 10 and I find the word "OPEN" in column H, the current row needs to be copied to the next empty roe on sheet 11, etc.
View 5 Replies
View Related
