Basically Column O has data that need to be moved to the different worksheet in one workbook.
so If Column O=Bad Number in any row in Column O move to sheet1 or If Column O=Good Number in any row in Column O move to sheet 2 etc.
I have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
M195_-_Subinventory_Item_Locato ABCDEF1LocatorItemSERIAL_NUMBERLOT_NUMBERON_HANDUOM201
.REEF..22700300100 228136EA301.REEF..22643400000 331122EA401
.REEF..K20-745-000 531124EA501.REEF..K20-618-000 531132EA601
.REEF..22747300000 1122111EA701
[Code] .........
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
View 2 Replies View RelatedI am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies View RelatedI am maintaining a spreadsheet to enter all my sales orders. I need a code which automatically moves the entire row to a new sheet "Completed" when the order status is selected as "Completed".
View 6 Replies View RelatedI have Excel 2002. I need to create a formula that will move an entire row to another page within the same workbook if a cell in that row has a certain value. Example would be if A1 cell in the row has a value of 111 I need to move the entire row to another page. I could use the sort then cut function in a macro but the spread sheet I'm working with changes daily. One day there will be 10 A1 cells with 111 the next 30 cells with 111 in A1 and some days no cells with 111.
View 4 Replies View RelatedOk so Im working on Christmas functions and this is how my data base looks
Date
Name
Address
Seats
Price
Total
1/12/2013
James Fran
1 Bold street
4
£20
£80
[Code] ......
What I need to do is move all the dates onto their own worksheet, so every row containing 1/12/2013 would move to the worksheet 1.12.13, the 6/12/2013 would move to the worksheet 6.12.13 and so on.
Currently I have to copy and paste each row manually, which takes time. Any macro or formula which would do this automatically every time new data is entered. The main database, like above, will contain around 200 entries.
I have a range of data in Sheet1- if in column D the cell contains the word "Everyday" I need the entire row to be cut and pasted to Sheet2. Does anyone know of a way in which a macro could do this? I would need the entire row to be cut from Sheet1 and pasted into Sheet2.
View 3 Replies View RelatedI would like to sort rows from Sheets 2-6 based on the value in Column G into Sheets with the same name. For example, if a cell in column G states "BluePrint", I would like the entire row to be copied into the tab labeled "BluePrint".
however I have been unsuccessful in adapting the coding to my specific wording.
Based on the example and solutions from one of our friends post
http://www.excelforum.com/excel-prog...ell-value.html.
i want to know the code with the same data as posted in THAT example,changing the data slightly like adding "TODAY" & "TOMMORROW" as other key words which will be Cut/Copied as seperate groups one beneath the other.
I had attached the worksheet with the actual data & the final Required format.
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
Simple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
As I am at work, it does not allow me to upload the file due to restrictions on uploading. However, the spreadsheet is fairly simple so should be able to describe it.
The main sheet is called "Investigation Court Apps". An entry is made into each row and the status shows as "Open" in Column A, until a final closure date is input in Column Z, at which point the entry in Column A changes to "Closed". This is achieved with the following IF statement in Column A.
=IF(B3="","",IF(ISNUMBER($Z3),"Closed","Open"))
So that part is all automated. What I need is some VBA coding or macro (might be same thing but completely new to all this) that when the value in Column A changes to "Closed" the whole row moves over to "Sheet3". Once the row has been moved over, I want to ensure there are no blank rows also.
I have tried the following amongst others:
Sub MoveToSheet3()
Dim C1 As Range
Dim RowNum As Integer
For Each C1 In Sheets("Investigations Court Apps").Range("N1:N" & Range("A65536").End(xlUp).Row)
If Cll = 0 Then
[Code]....
I know to open VBA its Alt+F11 and to close Alt+Q, but thats about it.
i need a macro that will allow an entire row from one sheet be copied into a new sheet.
so basically here is what needs to be done:
1. from my active sheet, look in Column 'D', select all rows in in column D if it has the word "Confirmed" in it
2. create a new sheet and paste all those selected rows to this sheet
3. delete this transfered data from sheet 1
4. in the new sheet, i need to add in titles as follows in columns A - O:
Ticket
OrgCode
Event
Event Status
Project Type
Project Status
Start Date
End Date,.....................
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies View RelatedI need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
I am looking to change to color of an entire row based on the value of a single column in that row....Say I have an issue on a line and the "priority column is set to high" I would like that entire row to turn red....
View 9 Replies View RelatedI have a spreadsheet with data in a1:p100 and i'm trying to find a macro that anytime the cell contents change in either column B or Column F it copies the entire row to another tab in the spreadsheet.
View 9 Replies View RelatedI am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
I need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies View RelatedI want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
I am looking to change to color of an entire row based on the value of a single collumn in that row....Say I have an issue on a line and the "priority collumn is set to high" I would like that entire row to turn red....
View 9 Replies View RelatedI want to do is copy all rows from the worksheet DATA based on column G (Date) and copy it to a new sheet based on the date (all 2003 on the 2003 sheet and all 2004 on 2004 sheet.....).
I have already created the new sheets including headers minus data. I would like to have all the data moved except the last to Columns AW & AX. I have two hidden sheets in this workbook. Would it be possible to have it auto-populate future entries from the "DATA" worksheet to autofill onto the new sheets?
Just noticed that I titled the Thread with Move but what I am asking for is copy. I cannot change the Thread title.
I have a spreadsheet in which the user will respond to questions using "T" for "True" or "F" for "False". If there is a certain number of T's I would like the macro to take the user to one sheet in the workbook or if there are a certain number of F's I'd like it to take the user to another sheet in the workbook.
View 2 Replies View Related
