I have a macro that takes data in rows 1 through 500 from many tabs and collects them in the summary tab.
I would like to write a macro that only selects rows that have data in Column A. Therefore, reducing the number of rows copied from all tabs from 500 to only a few that contain data that I really need.
This is what i currently have:
[Code] .........
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
Basically I have an Excel workbook with 6 different worksheets containing data. In each sheet I have two columns that are the same in each sheet, called "Category" (column F) and "amount" (column G). In one of the sheets I also have "Category" and "amount" in column H and I.
I want to write a VBA code that copies these columns (until blank row) and pastes them underneath eachother in the summary sheet.
I am currently working through a macro and got stuck about halfway. I have a number of files in a folder on my drive that I am pulling the first tab from into a Master workbook, and then I want to have a summary tab for all of those tabs(they are all identical). Some of the cells will be text(say range A5:C105), some will be SUM(E6:G105) and some will be AVERAGE(D6:D104) formulas needed. These formulas will not change, but will need to pull the data from all tabs that are pulled into the file.
So far I have this code that pulls all of the first tabs together:
Code:
Sub Staff_Plan_Update()
Dim wbDst As Workbook
Dim wbSrc As Workbook
Dim wsSrc As Worksheet
Dim MyPath As String
Dim strFilename As String
Call TimeStamp
[Code] ......
I was going to record a macro that creates a summary table every time, but not sure if it is easier to create a blank template for the summary tab that will update every time all of the tabs are pulled into this file. The problem I ran across with that is that I will be taking the SUM of all tabs, but the number of tabs/name of tabs will be different.
is it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?
I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.
Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?
Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?
The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)
I am looking to write a macro that will take 5 sheets and paste the rows into 1 summary tab. The names of the sheets are, CMH, ORD, JFK, LAX, and MIA. There are other sheets in the book but I don’t want any information from them. The five sheets have the same columns. I want to paste only the rows of the last entry for Origin and Forwarder. I have enclosed an example. So in rows 2 & 3 we have the same Origin-Forwarder combo but I only want the most current which would be row 3. Some Origin-Forwarder just has one entry so of course I would want that one.
View 7 Replies View RelatedI have multiple tabs with information in the same cells on each tab (each tab is a different product). Is there an easy way of pulling this information for each tab onto a summary page?
View 4 Replies View RelatedI have multiple tabs and each tab has an invoice. In the summary tab, I want to grab certain cells ie. Invoice #, Number of items, and total invoice amount.
The tricky part is, although the format for each invoice is the same, the product list for some invoices may be longer in some invoices (which will affect the total amount - aka total amount may be in cell F40 instead of F10).
Since I get these invoices on a regular basis, I would really like to create a macro where it will just find the items I need and paste it in the summary. I have no problems making this file work if the items are all in the same cell and format for each tab.
I have a summary tab in which I am trying to sum data based on specific variables from 30 other tabs in the worksheet
- In the summary tab, I have months (one year worth) over the top row and consultant names in the first column
- Each other tab represents a project
- I want for consultant 1 in summary tab, to have:
For january, the sum of dollars spent in january in each project (so across all tabs)
Same for february to december.
I have attached an exemple Note that the consultant names will always have the same syntax but will not necessarily be in the same cell in each tab.
I have a worksheet that contains 26 tabs all of which have the same format but contain different data based on that pay period. i would like to create a summary tab which will allow me to enter the pay period at the top (1,2,3 ect) and have excel reference that tabs information into the summary. Is this possible?
View 6 Replies View RelatedI'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
View 2 Replies View RelatedI am trying to setup a file that has three tabs - LIST, COLOR AND PLANT.
I want to be able to select a color or colors (red, blue, yellow, green) and a plant or plants (tree, shrub, flower, grass) using radio buttons, maybe?
If i chose red and blue for a color and chose tree, shrub and grass for plants, i would like to populate the LIST tab with these items.
I'd also like to give an associated value to each color and plant. for example, for the colors, i could choose values between 1, 2 and 3. if i chose red 1, it would add "red 1" to the LIST. if i wanted to later change it to 3, i could do that on the COLOR tab and the LIST tab would update automatically.
I have a summary sheets for my report that my department no longer wants to use. Rather they want to have a longer, more detailed version of the same thing, but rather than 1 sheet summarizing it all, they want it 1 widget, 1 sheet.
How can I have my Checksheet tab (see upload), turned into multiple tabs. In the specific example I provided, there are 10 widgets, so therefore I created the result in 10 tabs.
How can I get a macro to turn Checksheet tab into the next 10 tabs (see excel upload)?
I have attached the excel sheet of how my summary sheet is, and how it's supposed to look like.
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I have a worksheet that contains about six different tabs. When this form is completed some users might want to have certain tabs copied into a different workbook. Unfortunately each user might want to copy different tabs. I was wondering if there was a Macro that I could write that would ask the users which tabs they want to copy into a new workbook.
View 4 Replies View RelatedI have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies View RelatedI'm pasting a lot of data into a spreadsheet and then using a macro to split the data into three different sheets/tabs. I'm doing this by simply copying entire columns. Each sheet/tab has a headings row and autofilters added so that my boss can filter on certain manufacturers in one of the columns.
The problem is that when he selects a manufacturer, at the bottom left corner of the screen it shows the number of records, which at the moment will be something like "6 of 65211".
The actual sheet only has a few hundred rows (not 65211). So how do I delete all the blank rows beneath my data using a macro or vba code?
As an extra point, I'd like to use column B to check for blank rows (not column A).
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have a macro that inserts a formula on the first row and then copies it down. The problem is the row count is variable but I know it won't exceed 5000 so I just copy it down 5000. For the blank rows I get the ugly #NAME, #VALUE, etc errors.
I know there are ways to supress those error messages, but how about a way so that the macro checks to see how many rows are populated so it doesn't copy down on the blank rows.
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View RelatedI have a sheet that has a few companies but gets "duplicating" because they have different transaction dates of when amounts came in. How do I put that into one row?
Attatched is a sample xls file On sheet1 I have my current situation ans on Sheet2 I am showing what I want, I find it difficult to do it or maybe it is simple?
Basically what I'm trying to do is instead of calculating the columns msq1,msq2.. bsq1,bs2... and after link the value to another Worksheet, what's the way to do this with Pivot Table report to get the results the same as shown in pic attached? Pivot.gif
View 3 Replies View RelatedI have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING
2.Identify the monthly range of cells
3.Copy the data (Indicator, Month, Name and Activity)
4.Go to sheet SUMMARY
5.Go to next available cell in column A
6.Paste special, transpose
7.Loop to next sheet name in the ListingOrder
8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies View RelatedI have a question about my Excel template: I have a workbook with 3 existing sheets in this order: DATA, Fronpage, Summary. In the Frontpage I have a clickable button to create a new sheet with name as Report1, Report2, etc. at each click. What I wanted is that when I click the button to output a Report sheet, say Report1, I want it also dynamically to copy and paste a range , for example r2c1 : r5c6 from the new report sheet to the Summary sheet. The pasted results from each Report in the Summary sheet should not be replaced, instead, should be appended separated by two rows. The Summary table is like a log file that keep track of certain rows of the report sheets. Could anyone give me a hand
View 5 Replies View Relatedwriting a VBA to convert a set of data in sheet 1 to one in sheet 2(I am enclosing that as a Excel document"Test -Original").I have described what needs to be done ( step by step ) below.
Develop a macro
1. I have a report from SAP BW, the original format of which is in sheet 1.I need to develop a macro using VBA and need the report with the format in sheet 2.
2. I need a “Results “row after every Bill to Party in column A as below(screen shot 1.doc):
The number of customers is dynamic i.e.it keeps changing every month
4. Nothing needs to be done to column.SAP BW will not overwrite the format and the data in column G.Hence leave it as it is.
5. Calculate the number of Sales document numbers for each customer and put the value of 1 for every value. If it is blank it should not be counted and put the value of 0 for those rows. (Shown below) Display the sum of the number of sales document numbers in the results row for column H
6. In the column I, put the value of 1 if the difference column (column G) is 0 and put the value of 0 if the value in the difference column (column G) is any value apart from 0.now sum the value in the results row for each customer and display the summation value in the results row under column I
7. Compute the percentage which is the values in (column I/Column J)*100 .This should be done only for the results row
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
