I populate a worksheet from an external source via a macro button. It populates columns A through K.
I then do an IF statement in 'L' to give a result 'East' or 'West' which differentiates between job locations.
I then want to move all the 'East' job to a separate worksheet and all the 'West' ones to another using another macro button.
I want to copy a range of data in a new sheet using a criteria. First i would like to choose a column, and second the criteria.If criteria in this column is meet , copy all rows in the range that meet that criteria in a new sheet named after the criteria .
View 9 Replies View RelatedI am copying from cell A2 to C2, then A8 to C8, etc. if the cell in column "A" contains the text "Item" until the end of data in column A. Here is what I am attempting:
Sub MoveItem()
sText = "Item"
sText = LCase(sText)
iMax = Cells.SpecialCells(xlCellTypeLastCell).Row
For i1 = iMax To 1 Step -1
If InStr(1, LCase(Cells(i1, 1)), sText) <> 0 Then
Cells(i1, 1).Copy Destination:=Cells(i1, 3)
End If
Next i1
End Sub
The problem is the destination location. If I define it as a Range eg: Cells(i1, 1).Copy Destination:=Range("C2") The macro works, but does not iterate the destination cell.
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
[Code].....
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet4.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If ..................
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
In a data table, I need to sequence down a criteria list in Autofilter to the end. The list contains may contain either numberic or string dat, but no blanks. At each criterion, I need to copy the range and paste to another workbook. After reviewing many posts, I beleive I can create a VBA macro to do everything except sequencing.
View 2 Replies View RelatedI have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I have a workbook with 3 sheets
Sheet1 - TeamList - Column A is a list of all the team leaders which is used to create a new worksheet for every team. Col B is blank. Column C, D, E are the team lists where teams can consist of anywhere from 10-25 employees.
For example
Column A
Column B
Column C
Column D
Column E
Team Leaders
Team Leader
Employee
Pin
TL 1
TL 1
Emp 1
10001
[Code] ......
Sheet2 "RawHours" A raw data sheet that contains employee hours information
For Example
Employee #
PIN
NAME
Reg
OT
TRN
Stat
Sick
Vac
Berv
2000100
10001
Emp 1
24.00
0.00
[Code] .......
Sheet3 - Template
Basically what I want to be able to do is create a sheet for every team leader and copy and paste there team into the appropriate sheet.
I have the sheet create done by simply copying the template and renaming each sheet using the Team Leaders list from column A from the TeamList sheet. And then I copy the page setup information using the template as well but when it comes to pulling over the appropriate team members in to the appropriate sheet I can not seem to wrap my head around it.
Below is the current code I am using:
Code:
Option Explicit
Sub CreateSheet()
Dim LR, i As Long
Dim shCount As Integer
Dim Sh As Worksheet
Dim Cell As Range
Dim CpySht As PageSetup
[Code] ........
Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies View Relatedi m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
I am tracking total man hours of contractors in columns of different rates applicable. At present I have structured my worksheet with the different rates across and days going down. As I am invoiced for a period of work I will log the invoice ref number in a separate field. I would like to sum totals to report against $ Invoiced and $ Committed (i,e worked but not actually invoiced against yet).
Here is an example of what I am trying to achieve. The Actual showing sum mhrs * rate only for the mhrs entries with an invoice in corresponding Invoice Ref Column. The Committed producing sum of all mhrs * rate [which I am using =(SUM(D9:D37)*D7)] regardless of what is in invoice ref column.
This way I can hopefully track what we have been billed and also what we can expect to have to budget for to cover what has been worked but not billed against.
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
i have is a sheet with abotu 1000 rows of data and 21 columns. I want to scan column E for 13 different criteria types. If the criteria is met, then I would like to copy the same row of data.
here's the catch, I dont want the entire row of data, I only want about 10 of the rows. I want these to be pasted onto other sheets in the workbook.
Another problem I have run into is, IN column E, there are some spaces in soem of the rows. This has led to problems I have found in other solutions i have tried.
I am familar with VB some, if i can just get pointed in the right direction I think we can get this figured out.
In column D of an excel sheet, there are a number of drop-down choices from a list. I am looking to create a button macro that will filter out all cells in Column D that = "Follow-Up". I then want it to copy that entire row to another sheet in the same workbook and add it at the first available blank row. Ideally, each time I hit the button, my list of "Follow-Up" rows gets longer with more data. Below is the code I am using, but nothing is populating in Sheet2.
Sub NewSheetData()
With Application
.ScreenUpdating = False
.EnableEvents = False
[Code] ...........
I have to create a macro that envolves a loop and not sure where i have to start. I have a sheet of data and my aim is to email sections of this data of to different email addresses in Lotus Notes. I have figured out how top do the latter just the former i am a little confused about. Basically on my sheet of data each row has a specific branch #, i want to be able to loop a formlua so that when ever it finds a number it creates a spreadsheet. The next aim which i can do is then in the macro email this sheet off to a specific address and then kill it.
The loop macro should then go down the spreadsheet again to find the next branch number and create another spreadsheet.. and the process repeats itself. I know it can be done, just not sure how..
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
Basically I have the below formula, however, instead of counting I would like to list the entire row on a separate sheet if the criteria is met.
=COUNTIFS(C5:C19999,"???14*",G5:G19999,"RC*")
Here's what we need to do:
We are compiling one master spreedsheet from many smaller ones and I need to figure out how to copy them quickly and efficiently. For example:
Small Spreadsheet:
Column B is marked as P, M, C or S. This represents the type of the account.
Column C is the name of the account.
Master Spreadsheet:
We have a column for each account type (P,M,C,S)
Can we use a formula/macro to automatically copy columns B and C from the small sheet and organize them accordingly in the Master Spreadsheet?
For example:
Small spreadsheet:
P Account Name1
M Account Name 2
M Account Name3
C Account Name4
M Account Name5
would appear in the Master Spreadsheet as:
P M C
Account Name1 Account Name2
Account Name1 Account Name3 Account Name4
Account Name1 Account Name5